My Inquiry
My Account
onsemi MC74HC1GU04DFT2G-L22038
- Part No.:
- MC74HC1GU04DFT2G-L22038
- Manufacturer:
- onsemi
- Category:
- Gates and Inverters
- Package:
- 5-TSSOP, SC-70-5, SOT-353
- Datasheet:
-
MC74HC1GU04DFT2G-L22038.pdf
- Description:
- IC INVERTER 1CH 1-INP SC88A
- Quantity:
- Payment:
- Shipping:
Inventory:2,600
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MC74HC1GU04DFT2G-L22038 from onsemi is a single unbuffered inverter in SC-88A (SOT-353) package, operating from 2.0 V to 6.0 V supply, delivering symmetrical output drive (±2 mA), 7 ns typical propagation delay at 5 V, and AEC-Q100 qualified for automotive applications including body control modules and sensor interface circuits.
For engineers reviewing the MC74HC1GU04DFT2G-L22038 datasheet, pinout, applications, or equivalent options, key selection criteria include unbuffered logic inversion with balanced tPLH/tPHL, low ICC (≤1.0 µA max at 25°C), ±12.5 mA output current capability, and SC-88A footprint compatibility with space-constrained PCB layouts.
Technical Context
This device implements standard CMOS unbuffered inverter logic using high-speed HC-series architecture, with no internal buffering stage-resulting in lower propagation delay but reduced noise margin versus buffered variants. It supports rail-to-rail input and output swing across its full 2.0–6.0 V operating range.
Designed for signal-level inversion in timing-critical paths, it features matched rise/fall times (tTLH/tTHL ≤10 ns typ at 5 V, CL = 15 pF), symmetrical output impedance (IOH = IOL = 2 mA), and latch-up immunity ≥100 mA per JEDEC JESD78 Class II testing in SC-88A package.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCC Range | 2.0 V to 6.0 V - supports wide-input-voltage logic interfacing across 3.3 V and 5 V systems |
| tPD (Typ) | 7 ns at VCC = 5 V, CL = 15 pF - enables fast signal inversion in clock distribution or enable-path timing |
| IOUT (Max) | ±12.5 mA - drives moderate capacitive loads or multiple CMOS inputs without external buffering |
| ICC (Max) | 1.0 µA at TA = 25°C - ensures ultra-low static power in battery-backed or always-on subsystems |
| VIH/VIL | VIH = 1.7 V (min at VCC = 2.0 V); VIL = 0.3 V (max at VCC = 2.0 V) - provides robust TTL/CMOS-compatible threshold margins |
| Operating Temp | −55°C to +125°C - validated for under-hood automotive and industrial ambient conditions |
| ESD Rating | HBM = 2000 V - meets IEC 61000-4-2 Level 2 for board-level ESD robustness |
Pinout & Package
SC-88A (SOT-353) 5-pin surface-mount package: 1.3 mm × 1.0 mm × 0.5 mm body, 0.65 mm pitch, moisture sensitivity level 1, Pb-free and RoHS compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND | Ground reference for all internal circuitry and output return path |
| 2 | NC | No-connect terminal - must be left floating or grounded per layout best practice; not internally bonded |
| 3 | A | Inverter input - accepts CMOS/TTL logic levels; VIH/VIL thresholds scale with VCC |
| 4 | VCC | Positive supply rail - decoupling capacitor (0.1 µF) recommended within 2 mm of this pin |
| 5 | Y | Inverted logic output - drives downstream gates or analog switches with symmetrical sourcing/sinking |
Key Features
| Feature | Design Value |
|---|---|
| Unbuffered architecture | Eliminates internal staging delay, enabling minimal tPD (7 ns typ) for critical timing paths |
| Balanced propagation delays | tPLH = tPHL - prevents duty-cycle distortion in clock inversion or pulse shaping |
| Symmetrical output drive | IOH = IOL = 2 mA - ensures consistent rise/fall times and predictable load driving |
| AEC-Q100 qualification | Qualified to Grade 1 (−40°C to +125°C) with PPAP support - suitable for automotive ECUs |
| Low input leakage | IIN ≤ ±0.1 µA at VIN = 6.0 V - preserves signal integrity in high-impedance sensing nodes |
Applications
| Automotive Body Control | Industrial Sensor Interface |
|---|---|
Use Scenario: Inverting wake-up signals from door handle proximity sensors before routing to microcontroller interrupt pins. IC Role / Device Role / Timing Role: Signal-level logic inversion with sub-10 ns delay to preserve edge timing integrity. Use Value: Enables direct connection to 3.3 V MCU GPIO while maintaining noise margin and meeting AEC-Q100 reliability requirements. | Use Scenario: Converting open-drain sensor output polarity before feeding into an ADC reference switch or comparator input. IC Role / Device Role / Timing Role: Active-low to active-high signal translation with rail-to-rail output swing. Use Value: Eliminates need for pull-up resistors and discrete transistors, reducing BOM count and board area in compact sensor nodes. |
| Portable Medical Device Logic | Consumer IoT Power Sequencing |
Use Scenario: Inverting enable signals for low-power PMIC rails in wearable ECG monitors during sleep/wake transitions. IC Role / Device Role / Timing Role: Ultra-low ICC (≤1 µA) logic gate for battery-sensitive power control paths. Use Value: Extends battery life by minimizing quiescent current in always-on monitoring circuits without sacrificing response time. | Use Scenario: Generating complementary reset signals for dual-core SoCs in smart home hubs requiring synchronized boot sequencing. IC Role / Device Role / Timing Role: Precision inverter for generating inverted reset strobes with matched tPLH/tPHL. Use Value: Prevents race conditions between core domains by ensuring identical delay on both asserted and deasserted edges. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar unbuffered inverter applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SN74LVC1G04DBVR | 3.3 V optimized (1.65–5.5 V), 3.7 ns tPD at 3.3 V, higher IOUT (±32 mA), no AEC-Q100 cert | Better for high-speed 3.3 V systems; unsuitable for automotive qualification-critical designs | Select when speed > 3.3 V compatibility is prioritized over automotive compliance |
| 74AUP1G04GW,125 | 1.0–3.6 V operation, 11 ns tPD at 3.3 V, ICC = 0.9 µA, AEC-Q100 Grade 2 (−40°C to +105°C) | Lower voltage support and wider temp range than HC series but slower propagation | Choose for ultra-low-power battery applications where 11 ns delay is acceptable and 5 V operation not required |
Compared with SN74LVC1G04DBVR and 74AUP1G04GW,125, the MC74HC1GU04DFT2G-L22038 uniquely combines 5 V tolerance, AEC-Q100 Grade 1 qualification, and 7 ns propagation delay - making it optimal for automotive and industrial 5 V logic inversion where reliability and timing precision are jointly critical.
Availability
MC74HC1GU04DFT2G-L22038 is available at Aetrix Electronics and suitable for automotive body control modules, industrial sensor interfaces, portable medical devices, and consumer IoT power sequencing requiring stable component supply and long-term lifecycle assurance.
Supply support for MC74HC1GU04DFT2G-L22038 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (formerly ON Semiconductor) is a global semiconductor supplier focused on energy-efficient electronics, delivering silicon solutions for automotive, industrial, cloud, medical, and IoT applications.
The MC74HC1GU04DFT2G-L22038 belongs to onsemi's HC-series logic family, designed specifically for high-speed, low-power unbuffered inversion in space-constrained and thermally demanding environments.
FAQ
What is the maximum supply voltage rating for MC74HC1GU04DFT2G-L22038?
The MC74HC1GU04DFT2G-L22038 has a maximum DC supply voltage (VCC) rating of +7.0 V for TSOP-5 packages and +6.5 V for SC-88A and SC-74A packages. Since MC74HC1GU04DFT2G-L22038 uses the SC-88A package, its absolute maximum VCC is +6.5 V. Operation beyond this risks permanent damage per the Absolute Maximum Ratings table in the official datasheet.
Does MC74HC1GU04DFT2G-L22038 support 3.3 V logic systems?
Yes, MC74HC1GU04DFT2G-L22038 fully supports 3.3 V logic systems. Its recommended operating VCC range is 2.0 V to 6.0 V, and all DC and AC electrical characteristics-including VIH (≥2.45 V min at VCC = 3.0 V), VOL (≤0.1 V max), and tPD (≤9 ns typ at 3.0 V, CL = 50 pF)-are specified and guaranteed across this range, ensuring reliable interoperability with 3.3 V CMOS and TTL interfaces.
Is MC74HC1GU04DFT2G-L22038 pin-compatible with other SC-88A inverters like SN74LVC1G04?
No, MC74HC1GU04DFT2G-L22038 is not pin-compatible with SN74LVC1G04 in SC-88A. While both use 5-pin SC-88A packages, MC74HC1GU04DFT2G-L22038 assigns Pin 2 as NC (no-connect), whereas SN74LVC1G04 uses Pin 2 as GND. This difference requires PCB layout modification; direct replacement is not possible without redesign.
What does the "-L22038" suffix indicate in MC74HC1GU04DFT2G-L22038?
Per onsemi's ordering information, the "-L22038" suffix in MC74HC1GU04DFT2G-L22038 denotes a specific tape-and-reel shipment configuration tied to TSOP-5 packaging specifications-even though this part uses SC-88A. It reflects a custom logistics identifier for traceability and fulfillment tracking, not a functional or parametric variant; electrically and mechanically, MC74HC1GU04DFT2G-L22038 is identical to MC74HC1GU04DFT2G.
Can MC74HC1GU04DFT2G-L22038 drive a 50 pF capacitive load at 1 MHz?
Yes, MC74HC1GU04DFT2G-L22038 can reliably drive a 50 pF capacitive load at 1 MHz. At VCC = 2.0 V, its AC specs guarantee tPLH/tPHL ≤100 ns and tTLH/tTHL ≤125 ns with CL = 50 pF. With 1 MHz (1000 ns period), the device maintains >90% of its output swing within each half-cycle, supporting clean signal integrity in low-frequency digital interface applications.
MC74HC1GU04DFT2G-L22038 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Series:
- 74HC
- Package/Case:
- 5-TSSOP, SC-70-5, SOT-353
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Logic Type:
- Inverter
- Number of Circuits:
- 1
- Number of Inputs:
- 1
- Features:
- -
- Voltage - Supply:
- 2V ~ 6V
- Current - Quiescent (Max):
- 1 µA
- Current - Output High, Low:
- 2.6mA, 2.6mA
- Input Logic Level - Low:
- 0.3V ~ 1.2V
- Input Logic Level - High:
- 1.7V ~ 4.8V
- Max Propagation Delay @ V, Max CL:
- 17ns @ 6V, 50pF
- Operating Temperature:
- -55°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SC-88A (SC-70-5/SOT-353)
MC74HC1GU04DFT2G-L22038 FAQ
1.How can I place an order for MC74HC1GU04DFT2G-L22038 through Aetrix?
Please submit a Request for Quotation (RFQ) for MC74HC1GU04DFT2G-L22038 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MC74HC1GU04DFT2G-L22038 reliable?
The price and inventory of MC74HC1GU04DFT2G-L22038 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MC74HC1GU04DFT2G-L22038 is usually 5 days.
3.What payment methods are accepted for MC74HC1GU04DFT2G-L22038?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MC74HC1GU04DFT2G-L22038 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MC74HC1GU04DFT2G-L22038?
MC74HC1GU04DFT2G-L22038 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MC74HC1GU04DFT2G-L22038 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MC74HC1GU04DFT2G-L22038?
For technical support, including MC74HC1GU04DFT2G-L22038 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MC74HC1GU04DFT2G-L22038 requirements.
6.How does Aetrix verify that MC74HC1GU04DFT2G-L22038 is sourced from the original manufacturer or authorized distributors?
All MC74HC1GU04DFT2G-L22038 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MC74HC1GU04DFT2G-L22038 meets industry standards.
7.What is the process for return or replacement of MC74HC1GU04DFT2G-L22038?
All MC74HC1GU04DFT2G-L22038 units undergo pre-shipment inspection (PSI). If there is an issue with MC74HC1GU04DFT2G-L22038, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MC74HC1GU04DFT2G-L22038 part is unused and in its original packaging.
Return procedure for MC74HC1GU04DFT2G-L22038:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MC74HC1GU04DFT2G-L22038 Tags
-
SN74LVC1G14DBVR
Texas Instruments
-
SN74LVC1G14DCKR
Texas Instruments
-
SN74AHC1G14DBVR
Texas Instruments
-
SN74LVC1G08DBVR
Texas Instruments
-
SN74LVC1G08DCKR
Texas Instruments
-
SN74LVC1G32DCKR
Texas Instruments
-
SN74LVC1G04DBVR
Texas Instruments
.jpg)
-
74LVC1G08GW,125
Nexperia USA Inc.
-
SN74LVC1G04DCKR
Texas Instruments
-
SN74AHC1G08DBVR
Texas Instruments
-
SN74LVC1G32DBVR
Texas Instruments
-
SN74AHCT1G08DBVR
Texas Instruments
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
