My Inquiry
My Account
NXP Semiconductors MCF5206EFT40
.jpg)
- Part No.:
- MCF5206EFT40
- Manufacturer:
- NXP Semiconductors
- Category:
- Microprocessors
- Package:
- 160-BQFP
- Datasheet:
-
MCF5206EFT40.pdf
- Description:
- IC MPU MCF520X 40MHZ 160QFP
- Quantity:
- Payment:
- Shipping:
Inventory:3,537
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MCF5206EFT40 from Freescale Semiconductor is a Version 2 ColdFire® integrated microprocessor featuring a 54 MHz CPU core, 4 KB instruction cache, 8 KB on-chip SRAM, hardware multiply-accumulate (MAC) and divide units, and dual-channel DMA - deployed in industrial control systems requiring deterministic real-time response and legacy 68K software compatibility.
For engineers reviewing the MCF5206EFT40 datasheet, MCF5206EFT40 pinout, MCF5206EFT40 application, or MCF5206EFT40 equivalent, key selection considerations include its 208-pin PQFP package, 3.3 V core/5 V tolerant I/O, DRAM controller with EDO/page-mode support, dual UARTs, and I²C-compatible bus interface for embedded system integration.
Technical Context
The MCF5206EFT40 implements a fully static, synthesizable ColdFire V2 core with Harvard architecture: separate 4 KB direct-mapped instruction cache and 8 KB on-chip SRAM enable single-cycle code/data access. Its MAC and hardware divide units accelerate DSP-like arithmetic without external coprocessors.
Integrated peripherals include a DRAM controller supporting EDO and page-mode DRAMs, two 16-bit multimode timers, dual UARTs with synchronous/asynchronous operation, an I²C-compatible bus interface, JTAG debug support, and an 8-bit parallel I/O port - all accessible via glueless 8/16/32-bit memory-mapped interfaces.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | Version 2 ColdFire® - synthesizable, Harvard-architecture core with 54 MHz max frequency and Dhrystone 2.1 performance of 50 MIPS. |
| On-Chip Memory | 4 KB instruction cache + 8 KB SRAM - enables zero-wait-state execution of critical firmware and data buffers. |
| DRAM Controller | Supports EDO and page-mode DRAMs - eliminates need for external DRAM logic in cost-sensitive embedded designs. |
| DMA Channels | 2 independent channels - offloads CPU for high-throughput peripheral-to-memory transfers (e.g., UART-to-SRAM streaming). |
| UART Interfaces | 2 Universal Synchronous/Asynchronous Receiver/Transmitters - provides native RS-232/RS-485 connectivity without external transceivers. |
| Operating Voltage | 3.3 V core supply with 5 V tolerant I/O pins - simplifies mixed-voltage board design and interfaces directly with legacy 5 V peripherals. |
| Temperature Range | 0°C to +70°C - qualified for commercial/industrial ambient environments without extended thermal management. |
Pinout & Package
Package: 208-pin Plastic Quad Flat Pack (PQFP), 28 × 28 mm body, 0.5 mm pitch, RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDDCORE | Core power supply | 3.3 V supply input for CPU and internal logic; requires local decoupling. |
| VDDIO | I/O power supply | 3.3 V supply for I/O buffers; supports 5 V tolerant inputs without level shifters. |
| RESET | Active-low reset input | Synchronizes internal state machines and initiates boot sequence from configured vector address. |
| CLKIN | External clock input | Accepts 54 MHz crystal or oscillator signal; drives internal PLL for core and peripheral clocks. |
| DTACK | Data transfer acknowledge | Handshaking signal confirming valid read/write data on the external bus interface. |
| UDS/LDS | Upper/Lower byte strobes | Control 16-bit or 8-bit data transfers on multiplexed address/data bus; enables glueless interfacing. |
| SDA/SCL | I²C bus signals | Open-drain bidirectional lines for connecting to I²C-compatible sensors, EEPROMs, or PMICs. |
Key Features
| Feature | Design Value |
|---|---|
| Hardware MAC + Divide Unit | Accelerates fixed-point filtering, FFT, and control loop math in real-time without software emulation overhead. |
| Glueless DRAM Interface | Direct connection to EDO/page-mode DRAMs reduces BOM count and PCB layer count in memory-constrained systems. |
| 208-pin PQFP Pin Compatibility | Drop-in replacement for MCF5206 - allows performance upgrade without PCB redesign or layout changes. |
| JTAG Debug Support | Enables full boundary-scan testing, real-time trace, and non-intrusive debugging using standard ICE tools. |
| 68K Software Migration Path | Binary-compatible toolchain and free code translation utilities reduce porting effort from MC683xx-based legacy firmware. |
Applications
| Industrial PLC Controller | Medical Device Monitor |
|---|---|
Use Scenario: Real-time ladder logic execution and analog I/O scanning in compact programmable logic controllers. IC Role / Device Role / Timing Role: Central microprocessor managing deterministic task scheduling, DRAM-backed program storage, and dual UART communication with HMI panels. Use Value: 54 MHz core + MAC unit delivers sub-millisecond scan cycles; 8 KB SRAM stores runtime variables without external memory latency. | Use Scenario: Vital sign acquisition and display in portable patient monitors with battery-backed operation. IC Role / Device Role / Timing Role: System-on-chip host controlling ADC sampling, LCD refresh, serial telemetry, and low-power sleep/wake transitions. Use Value: 3.3 V core with 5 V tolerant I/O interfaces directly to legacy sensor modules and RS-232 telemetry ports. |
| Communications Gateway | Automotive Diagnostic Tool |
Use Scenario: Protocol translation between CAN bus and Ethernet in vehicle telematics gateways. IC Role / Device Role / Timing Role: Embedded host running Linux or uClinux, managing dual UARTs for CAN transceiver control and Ethernet MAC interface timing. Use Value: Dual UARTs and I²C bus support concurrent diagnostics, firmware updates, and sensor configuration without external bridge ICs. | Use Scenario: Handheld OBD-II diagnostic scanner with USB host and CAN interface. IC Role / Device Role / Timing Role: Main processor executing ISO 15765-2 stack, managing CAN message framing, and driving USB CDC-class virtual COM port. Use Value: Hardware divide unit accelerates CRC-16 calculation for diagnostic request/response validation; JTAG enables field firmware recovery. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar embedded microprocessor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MCF5206EMF40 | Same core and peripherals, but in 160-pin QFP package - lacks DRAM controller and one UART. | Targeted at space-constrained designs where external memory is not required and lower I/O count suffices. | Select MCF5206EMF40 only if DRAM interface and second UART are unnecessary; otherwise MCF5206EFT40 provides full feature set. |
| MCF5208EC | Successor ColdFire V2 device with 80 MHz core, 16 KB SRAM, enhanced DMA, and integrated FEC Ethernet MAC. | Designed for networked embedded systems requiring TCP/IP stack offload and higher throughput than UART-only interfaces. | Choose MCF5208EC when Ethernet connectivity and >50 MIPS performance are mandatory; MCF5206EFT40 remains optimal for cost-sensitive UART/DRAM-based control. |
Compared with MCF5206EMF40, the MCF5206EFT40 adds DRAM control and dual UARTs in a larger 208-pin package; versus MCF5208EC, it trades Ethernet capability and higher clock speed for lower BOM cost and proven qualification in long-lifecycle industrial deployments.
Availability
MCF5206EFT40 is available at Aetrix Electronics and suitable for industrial PLC controllers, medical device monitors, communications gateways, and automotive diagnostic tools requiring stable component supply across multi-year production programs.
Supply support for MCF5206EFT40 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Freescale Semiconductor (now part of NXP Semiconductors) was a leading designer of embedded processors, analog, and power management ICs for automotive, industrial, and networking markets.
The ColdFire® family - including the MCF5206EFT40 - was engineered to deliver 68K-compatible software migration paths with enhanced DSP capabilities and integrated peripherals for cost-sensitive real-time control applications.
FAQ
What is the maximum operating frequency of the MCF5206EFT40?
The MCF5206EFT40 operates at a maximum frequency of 54 MHz, delivering 50 Dhrystone 2.1 MIPS performance. It is also offered in a 40 MHz variant (MCF5206EFT40) for thermally constrained or lower-power applications. The core uses a fully static design, allowing clock throttling or stop modes without loss of state.
Does the MCF5206EFT40 support external DRAM, and what types are compatible?
Yes, the MCF5206EFT40 integrates a DRAM controller supporting EDO (Extended Data Out) and page-mode DRAMs. It provides full address/control signal generation for 8-, 16-, and 32-bit wide DRAM configurations. No external DRAM logic is required, enabling glueless expansion of program and data memory beyond the on-chip 8 KB SRAM.
Is the MCF5206EFT40 pin-compatible with earlier ColdFire microprocessors?
Yes, the MCF5206EFT40 uses a 208-pin PQFP package and is pin-compatible with the original MCF5206. This allows direct drop-in replacement in existing designs, delivering nearly three times the performance without PCB or schematic modifications - provided the target board supports the higher 54 MHz clock and updated power sequencing.
What debug interfaces does the MCF5206EFT40 provide?
The MCF5206EFT40 includes IEEE 1149.1 JTAG boundary-scan support for production testing and real-time in-circuit emulation. It also supports background debug mode (BDM) for non-intrusive breakpoint insertion, register inspection, and memory read/write during active execution - essential for validating time-critical embedded firmware.
Can legacy 68K assembly code be reused on the MCF5206EFT40?
Yes, Freescale provided free code translation utilities under license to convert MC683xx assembly into ColdFire-compatible object code. The MCF5206EFT40's ColdFire V2 core maintains binary compatibility for many common instructions, and its toolchain supports mixed-language development - enabling incremental migration of legacy 68K firmware onto the MCF5206EFT40 platform.
MCF5206EFT40 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Package/Case:
- 160-BQFP
- Series:
- MCF520x
- Packaging:
- Tray
- Product Status:
- Obsolete
- Core Processor:
- Coldfire V2
- Number of Cores/Bus Width:
- 1 Core, 32-Bit
- Speed:
- 40MHz
- Co-Processors/DSP:
- -
- RAM Controllers:
- DRAM
- Graphics Acceleration:
- -
- Display & Interface Controllers:
- -
- Ethernet:
- -
- SATA:
- -
- USB:
- -
- Voltage - I/O:
- 3.3V
- Operating Temperature:
- 0°C ~ 70°C (TA)
- Grade:
- -
- Qualification:
- -
- Security Features:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 160-QFP (28x28)
- Additional Interfaces:
- EBI/EMI, I2C, UART/USART
MCF5206EFT40 FAQ
1.How can I place an order for MCF5206EFT40 through Aetrix?
Please submit a Request for Quotation (RFQ) for MCF5206EFT40 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MCF5206EFT40 reliable?
The price and inventory of MCF5206EFT40 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MCF5206EFT40 is usually 5 days.
3.What payment methods are accepted for MCF5206EFT40?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MCF5206EFT40 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MCF5206EFT40?
MCF5206EFT40 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MCF5206EFT40 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MCF5206EFT40?
For technical support, including MCF5206EFT40 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MCF5206EFT40 requirements.
6.How does Aetrix verify that MCF5206EFT40 is sourced from the original manufacturer or authorized distributors?
All MCF5206EFT40 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MCF5206EFT40 meets industry standards.
7.What is the process for return or replacement of MCF5206EFT40?
All MCF5206EFT40 units undergo pre-shipment inspection (PSI). If there is an issue with MCF5206EFT40, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MCF5206EFT40 part is unused and in its original packaging.
Return procedure for MCF5206EFT40:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MCF5206EFT40 Tags
-
AT91SAM9260B-CU-999
Microchip Technology
-
AT91SAM9G25-CU
Microchip Technology
-
ATSAMA5D27C-CU
Microchip Technology
-
AT91SAM9X35-CU
Microchip Technology
-
AT91SAM9X25-CU
Microchip Technology
-
MCIMX6Y2CVM08AB
NXP Semiconductors
.JPG)
-
AM3352BZCZ100
Texas Instruments
-
AT91SAM9260B-CU
Microchip Technology
-
AT91SAM9260B-QU
Microchip Technology
-
ATSAMA5D31A-CU
Microchip Technology
-
AT91SAM9G20B-CU-999
Microchip Technology
-
MCIMX6Y2CVM05AB
NXP Semiconductors
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
