NXP Semiconductors MCIMX6X1CVO08AB

Overview

MCIMX6X1CVO08AB from NXP is an i.MX 6SoloLite applications processor featuring a single ARM Cortex-A9 core operating up to 1.0 GHz, 256 KB L2 cache, NEON and VFPv4 support, TrustZone security, and integrated electronic paper display (EPD) controller supporting E Ink panels up to 2332 × 1650 resolution with 5-bit grayscale - deployed in next-generation e-readers and low-power embedded devices.

For engineers reviewing the MCIMX6X1CVO08AB datasheet, MCIMX6X1CVO08AB pinout, MCIMX6X1CVO08AB application, or MCIMX6X1CVO08AB equivalent, key selection considerations include EPD controller capability, absence of Ethernet/CAN/ADC peripherals, 32-bit DDR3/LPDDR2 interface at 400 MHz, and its targeted use in battery-powered, high-contrast display systems requiring long static image retention.

Technical Context

The MCIMX6X1CVO08AB implements a single-core ARM Cortex-A9 CPU with VFPv4 and NEON SIMD extensions, coupled with TrustZone-enabled secure execution environment. It integrates a dedicated EPD controller with waveform memory and panel timing control logic optimized for bistable displays.

Memory subsystem includes a 32-bit DDR3/LPDDR2 interface (400 MHz), on-die ROM boot loader, and support for eMMC/NOR flash. Peripheral set excludes Ethernet, CAN, and ADC - emphasizing ultra-low static power and display-centric I/O such as RGB parallel output and USB 2.0 (2 ports, one with PHY).

Key Specifications

Pinout & Package

MCIMX6X1CVO08AB is housed in a 289-pin MAPBGA package (14 mm × 14 mm, 0.8 mm pitch), with ball map optimized for EPD signal integrity, low-noise power delivery, and thermal dissipation in fanless handheld enclosures.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar EPD controller applications.

Compared with MCIMX6SLL1CVO08AB, MCIMX6X1CVO08AB offers identical functionality at commercial temperature range; versus i.MX 6ULL, it trades connectivity peripherals for dedicated EPD acceleration and 40% lower active power - making it the sole NXP part with on-die E Ink controller.

Availability

MCIMX6X1CVO08AB is available at Aetrix Electronics and suitable for e-reader devices, electronic shelf labels, digital signage kiosks, and industrial HMI panels requiring stable component supply, long-term lifecycle support, and guaranteed EPD controller functionality.

Supply support for MCIMX6X1CVO08AB includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands, delivering secure, connected, and intelligent solutions for automotive, industrial, IoT, mobile, and communication infrastructure markets.

The i.MX 6SoloLite product line was designed specifically for ultra-low-power, display-centric embedded applications - prioritizing integrated EPD control, minimal peripheral count, and extended battery life over general-purpose connectivity.

FAQ

What is the maximum supported E Ink panel resolution for MCIMX6X1CVO08AB?

The MCIMX6X1CVO08AB supports E Ink panels up to 2332 × 1650 pixels with 5-bit grayscale. This resolution is implemented via its dedicated EPD controller with internal waveform memory and programmable timing registers - enabling full-panel refresh in under 1.2 seconds and partial updates at sub-100 ms latency. The controller handles all panel-specific voltage sequencing and temperature compensation internally.

Does MCIMX6X1CVO08AB include Ethernet or CAN interfaces?

No, MCIMX6X1CVO08AB does not include Ethernet or CAN controllers. Its peripheral set intentionally omits these interfaces to minimize die size, leakage current, and electromagnetic emissions - aligning with its target use in battery-powered EPD devices where wired connectivity is unnecessary. Communication occurs via USB 2.0 or external wireless transceivers interfaced through GPIO or SPI.

What memory types and speeds does MCIMX6X1CVO08AB support?

MCIMX6X1CVO08AB supports 32-bit DDR3 and LPDDR2/LPDDR3 memory interfaces operating at up to 400 MHz. It also supports eMMC 4.5 and parallel NOR flash for boot and storage. The memory controller includes configurable burst lengths and refresh timing to optimize power efficiency during EPD static display periods - achieving typical active memory power below 15 mW at 200 MHz.

Is MCIMX6X1CVO08AB pin-compatible with other i.MX 6SoloLite variants?

Yes, MCIMX6X1CVO08AB is pin-compatible with all i.MX 6SoloLite family members including MCIMX6SLL1CVO08AB and MCIMX6SLL2CVO08AB. They share identical 289-ball MAPBGA packaging, ball mapping, and power/ground pin assignments - allowing drop-in replacement across temperature grades and minor silicon revisions without PCB redesign.

What security features are implemented in MCIMX6X1CVO08AB?

MCIMX6X1CVO08AB includes ARM TrustZone technology, on-chip ROM-based secure boot with cryptographic signature verification (SHA-256/RSA-2048), and secure JTAG disable. These features enforce a hardware-rooted chain of trust that validates firmware authenticity before execution - protecting EPD waveform data, UI assets, and customer content from tampering in e-reader and ESL applications.