My Inquiry
My Account
Monolithic Power Systems Inc. MP2013AGG-5-P
- Part No.:
- MP2013AGG-5-P
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- 6-VDFN Exposed Pad
- Datasheet:
-
MP2013AGG-5-P.pdf
- Description:
- IC REG LINEAR 5V 150MA 6QFN
- Quantity:
- Payment:
- Shipping:
Inventory:1,650
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MP2013AGG-5-P from Monolithic Power Systems is a 40V-input, 150mA fixed-output linear regulator delivering 5.0V ±2% with 620mV dropout at full load and 3.3µA quiescent current. It operates across –40°C to +125°C and integrates thermal shutdown and current limiting. Designed for battery-powered industrial sensors and ultra-low-power microcontrollers requiring stable 5V rail from high-voltage sources.
For engineers reviewing the MP2013AGG-5-P datasheet, MP2013AGG-5-P pinout, MP2013AGG-5-P application, or MP2013AGG-5-P equivalent, key selection criteria include its QFN6 (2mm×2mm) package, 5V fixed output, low-IQ operation under 10µA at light loads, and compatibility with ≥0.47µF ceramic output capacitors without external compensation.
Technical Context
The MP2013AGG-5-P uses a PMOS pass transistor architecture enabling low dropout and reverse-voltage protection awareness via external diode recommendation. Its feedback loop regulates the FB pin to 1.215V, but in fixed-5V versions (like this one), FB is internally connected and may float-eliminating need for external resistors.
Enable control is implemented with precise EN thresholds (1.38V rise / 1.26V fall), allowing programmable UVLO via external resistor divider. Thermal shutdown activates at 150°C with 20°C hysteresis, and internal current limit peaks at 270mA-exceeding the 150mA continuous rating to support transient surges.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports direct connection to 12V/24V/36V battery systems without pre-regulation. |
| Output Voltage | 5.0V ±2% - tight accuracy ensures reliable logic-level compliance for MCU peripherals and analog circuitry. |
| Quiescent Current | 3.3µA typical - enables multi-year battery life in always-on IoT sensor nodes drawing <10µA average. |
| Dropout Voltage | 620mV at 150mA - allows regulation down to VIN = 5.62V, critical for brownout resilience in automotive stop-start cycles. |
| Output Capacitor | ≥0.47µF ceramic - eliminates need for tantalum or electrolytic caps, reducing BOM cost and board area. |
| Thermal Shutdown | 150°C activation - protects against sustained overload or poor PCB copper pour without external thermal monitoring. |
| Package | QFN6 (2mm×2mm, 0.65mm pitch) - compact footprint with exposed pad for efficient heat dissipation in space-constrained modules. |
Pinout & Package
MP2013AGG-5-P is housed in a thermally enhanced QFN6 (2mm×2mm) package with an exposed thermal pad. The 6-pin layout prioritizes minimal trace length for IN, OUT, and GND to ensure stability and thermal performance.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Input voltage supply | Accepts 2.5–40V; requires ≥1µF X5R/X7R ceramic bypass capacitor placed adjacent to pin. |
| 2 (EN) | Enable control input | Logic-high (>1.48V) enables regulation; logic-low (<1.26V) reduces IQ to <9µA for standby mode. |
| 3 & 4 (GND) | Ground reference and thermal path | Both pins and exposed pad must connect to solid ground plane for EMI suppression and thermal conduction. |
| 5 (FB) | Feedback reference node | Internally tied to 5V divider; left floating per datasheet-no external components required for fixed-output operation. |
| 6 (OUT) | Regulated 5V output | Stable with ≥0.47µF ceramic cap; supports fast load transients up to 150mA with <3ms startup time. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 3.3µA typical enables >10-year battery life in wireless sensor nodes operating at 10µA average load. |
| Wide input voltage range | 2.5V–40V accommodates 12V/24V vehicle batteries, solar-charged LiFePO4 packs, and industrial 36V rails without derating. |
| Low-ESR capacitor compatibility | Stable with ≥0.47µF ceramic output caps-reduces solution size by 50% vs. traditional 10µF tantalum designs. |
| Integrated protection | Current limit (270mA peak) and thermal shutdown (150°C) eliminate need for external fault management circuitry. |
| Fixed 5V output accuracy | ±2% over temperature and line ensures consistent ADC reference, UART levels, and GPIO logic thresholds. |
Applications
| Industrial Sensor Node | Automotive Body Control Module |
|---|---|
|
Use Scenario: Battery-powered temperature/humidity sensor transmitting data every 5 minutes via LoRaWAN. IC Role / Device Role / Timing Role: Primary 5V power rail generator for MCU, RF transceiver, and analog front-end from a 3.6V LiSOCl2 cell boosted to 12V or direct 24V truck battery. Use Value: 3.3µA IQ extends 2000mAh cell life to >12 years; 620mV dropout maintains regulation during cold-cranking dips to 6V. |
Use Scenario: Door module powering window motor drivers, LED status indicators, and CAN transceivers. IC Role / Device Role / Timing Role: Secondary 5V regulator supplying microcontroller peripherals and isolated CAN interface from 12V vehicle bus. Use Value: 40V absolute max input withstands load-dump transients; thermal shutdown prevents latch-up during motor stall conditions. |
| Portable Medical Monitor | Smart Meter Data Logger |
|
Use Scenario: Handheld pulse oximeter using AAA alkaline cells with boost converter feeding MP2013AGG-5-P. IC Role / Device Role / Timing Role: Low-noise 5V source for analog signal chain (LED drivers, photodiode amplifier, 16-bit ADC). Use Value: PSRR of 58dB @100Hz suppresses switching noise from upstream boost converter; ±2% VOUT ensures ADC accuracy. |
Use Scenario: Utility meter with NB-IoT modem, real-time clock, and EEPROM, operating 15 years on primary lithium battery. IC Role / Device Role / Timing Role: Always-on 5V regulator for RTC backup and wake-up controller, active only during transmission bursts. Use Value: <9µA shutdown current minimizes annual self-discharge; QFN6 package fits within 10mm² footprint constraint. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar fixed-output LDO regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Torex XC6210B502MR-G | 200mA rating, 2.5µA IQ, 4.5V–24V input, same QFN6 package | Limited to 24V max input - unsuitable for 36V industrial or 40V load-dump scenarios | Select when input never exceeds 24V and sub-2.5µA IQ is mandatory for >15-year battery life. |
| Analog Devices ADM7172ACPZ-5-R7 | 200mA, 1.5µA IQ, 2.3V–6.5V input, 10-pin LFCSP | Narrow 6.5V max input - requires pre-regulator stage for 12V+ systems | Choose only for low-voltage, ultra-low-noise applications where 5V rail originates from 3.3V/5V intermediate bus. |
Compared with XC6210B502MR-G and ADM7172ACPZ-5-R7, MP2013AGG-5-P uniquely balances 40V input tolerance, 5V fixed output, and QFN6 footprint-making it the sole option for space-constrained, high-input-voltage industrial sensors without adding complexity.
Availability
MP2013AGG-5-P is available at Aetrix Electronics and suitable for industrial sensor nodes, automotive body electronics, and portable medical monitors requiring stable component supply across extended temperature ranges and long product lifecycles.
Supply support for MP2013AGG-5-P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with design centers in the US, China, and Taiwan.
The MP2013A series targets ultra-low-power, wide-input-voltage linear regulation for battery-backed and harsh-environment applications-emphasizing quiescent current optimization and robust thermal protection.
FAQ
What is the minimum input voltage required for regulation at 5V output?
The MP2013AGG-5-P requires VIN ≥ 5.62V to maintain regulation at 150mA load, based on its 620mV dropout specification. At lighter loads, dropout decreases-enabling regulation down to 5.05V (50mV dropout) at 1mA, which supports operation during deep battery discharge.
Can the FB pin be left unconnected in the MP2013AGG-5-P?
Yes. As a fixed-5V variant, the FB pin is internally connected to the output divider and may be left floating per the datasheet. No external resistors or capacitors are needed-simplifying layout and reducing component count versus adjustable versions.
Does the MP2013AGG-5-P require an input capacitor?
Yes. A minimum 1µF X5R or X7R ceramic capacitor must be placed between IN and GND, located as close as possible to the IN pin. This stabilizes the input rail during line transients and prevents oscillation due to source impedance.
How does thermal performance differ between QFN6 and QFN8 packages?
The QFN6 (2mm×2mm) has θJA = 80°C/W versus 48°C/W for QFN8 (3mm×3mm). With identical PCB copper area, the QFN6 reaches thermal shutdown ~32°C hotter at 150mA-requiring careful thermal pad soldering and ground plane sizing to sustain full-load operation at 125°C ambient.
Is reverse-voltage protection integrated?
No. The internal PMOS pass device includes a body diode that conducts from OUT to IN if VOUT > VIN. In backup-battery or hot-swap scenarios, an external Schottky diode must be added in series with IN to prevent destructive reverse current-per Figure 5 in the datasheet.
What is the maximum allowable output capacitance?
No upper limit is specified. The regulator remains stable with output capacitances up to 10µF (X5R/X7R ceramic), improving load transient response and noise filtering. Larger values are acceptable but offer diminishing returns beyond 10µF for this architecture.
Does the EN pin support partial enable functionality?
No. EN is a digital enable/disable input with hysteresis (1.26V fall / 1.48V rise). It does not support analog dimming or PWM-based output control. For dynamic voltage scaling, an external FET switch or adjustable regulator variant (e.g., MP2013AGG) is required.
MP2013AGG-5-P Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- 6-VDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.85V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 7 µA
- Current - Supply (Max):
- 47 µA
- PSRR:
- 58dB ~ 55dB (100Hz ~ 100kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-QFN (2x2)
MP2013AGG-5-P FAQ
1.How can I place an order for MP2013AGG-5-P through Aetrix?
Please submit a Request for Quotation (RFQ) for MP2013AGG-5-P on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MP2013AGG-5-P reliable?
The price and inventory of MP2013AGG-5-P are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MP2013AGG-5-P is usually 5 days.
3.What payment methods are accepted for MP2013AGG-5-P?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MP2013AGG-5-P transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MP2013AGG-5-P?
MP2013AGG-5-P orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MP2013AGG-5-P order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MP2013AGG-5-P?
For technical support, including MP2013AGG-5-P datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MP2013AGG-5-P requirements.
6.How does Aetrix verify that MP2013AGG-5-P is sourced from the original manufacturer or authorized distributors?
All MP2013AGG-5-P products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MP2013AGG-5-P meets industry standards.
7.What is the process for return or replacement of MP2013AGG-5-P?
All MP2013AGG-5-P units undergo pre-shipment inspection (PSI). If there is an issue with MP2013AGG-5-P, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MP2013AGG-5-P part is unused and in its original packaging.
Return procedure for MP2013AGG-5-P:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MP2013AGG-5-P Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
