My Inquiry
My Account
Monolithic Power Systems Inc. MP2013AGG-5-Z
- Part No.:
- MP2013AGG-5-Z
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- 6-VDFN Exposed Pad
- Datasheet:
-
MP2013AGG-5-Z.pdf
- Description:
- IC REG LINEAR 5V 150MA 6QFN
- Quantity:
- Payment:
- Shipping:
Inventory:1,177
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MP2013AGG-5-Z from Monolithic Power Systems is a 40V-input, 150mA fixed-output linear regulator in QFN6 (2mm×2mm) package delivering 5.0V ±2% with 620mV dropout at full load and 3.3µA quiescent current. It integrates thermal shutdown, current limiting, and operates across –40°C to +125°C junction temperature for battery-powered microcontrollers and industrial sensors.
For engineers reviewing the MP2013AGG-5-Z datasheet, MP2013AGG-5-Z pinout, MP2013AGG-5-Z application, or MP2013AGG-5-Z equivalent, this page delivers verified electrical specs, package layout guidance, real-world use cases, and validated alternative options - all grounded in Monolithic Power's MP2013A Rev. 1.03 documentation and official ordering data.
Technical Context
The MP2013AGG-5-Z uses a PMOS pass transistor architecture enabling low-dropout operation down to 600mV at 150mA while maintaining stability with ≥0.47μF ceramic output capacitance. Its internal 1.215V reference feeds a precision error amplifier that regulates output via feedback control loop with <0.01%/V line regulation and <0.01%/mA load regulation.
Enable logic features asymmetric thresholds (1.38V rise / 1.26V fall), supporting clean startup and UVLO customization via external resistor dividers. Thermal protection activates at 150°C with 20°C hysteresis, and current limit is specified at 180–400mA depending on input voltage and output configuration.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports wide-range industrial batteries and automotive supply rails without external pre-regulation. |
| Output Voltage | 5.0V ±2% - factory-trimmed fixed output eliminates external feedback resistors and reduces BOM count. |
| Quiescent Current | 3.3µA typical - enables multi-year operation in always-on IoT sensor nodes powered by coin cells or energy harvesters. |
| Dropout Voltage | 620mV at 150mA - allows regulation from 5.62V input, critical for 6V nominal battery systems under discharge. |
| Output Current Limit | 180–400mA - provides robust short-circuit protection while sustaining 150mA continuous output with margin. |
| Thermal Shutdown | 150°C activation with 20°C hysteresis - prevents permanent damage during sustained overload or poor PCB thermal design. |
| PSRR @ 100Hz | 58dB - suppresses low-frequency ripple from switching converters upstream, improving ADC reference stability. |
Pinout & Package
MP2013AGG-5-Z is housed in a thermally enhanced QFN6 (2mm × 2mm) package with exposed thermal pad. The 6-pin layout prioritizes compact footprint and efficient heat dissipation in space-constrained applications such as portable medical devices and automotive body controllers.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Input Supply | Accepts 2.5V–40V unregulated input; requires ≥1µF X5R/X7R ceramic capacitor placed adjacent to pin for stability. |
| 2 (EN) | Enable Control | Active-high logic input; 1.26V falling threshold enables precise UVLO implementation using external resistor divider. |
| 3 & 4 (GND) | Ground Reference | Dual ground connections including exposed thermal pad - must be soldered to large copper pour for thermal performance and noise immunity. |
| 5 (FB) | Feedback Input | Internally connected to 5V output; left floating per datasheet for fixed-output operation - no external components required. |
| 6 (OUT) | Regulated Output | Delivers stable 5.0V; requires ≥0.47μF ceramic capacitor directly at pin for loop stability and transient response. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 3.3µA typ. - extends battery life in maintenance-free remote sensors and wearable health monitors. |
| Stable with minimal output capacitance | ≥0.47μF ceramic - eliminates need for bulky tantalum or electrolytic capacitors, reducing board area and cost. |
| Integrated fault protection | Thermal shutdown + current limiting - removes requirement for external protection circuitry in safety-critical designs. |
| Wide operating temperature range | –40°C to +125°C junction - qualified for under-hood automotive and industrial control environments. |
| Low dropout at full load | 620mV @ 150mA - enables direct regulation from partially discharged 6V lead-acid or LiFePO₄ batteries. |
Applications
| Industrial Sensor Node | Automotive Body Controller |
|---|---|
|
Use Scenario: Low-power wireless temperature/humidity sensor deployed in factory automation with 3.6V lithium-thionyl chloride battery. IC Role / Device Role / Timing Role: Primary 5V power rail generator for MCU, RF transceiver, and analog front-end - replaces discrete LDO + external protection. Use Value: 3.3µA quiescent current enables >10-year battery life; 40V input tolerance accommodates surge events on shared 24V plant bus. |
Use Scenario: Door module controlling window lift, mirror fold, and interior lighting in 12V automotive system. IC Role / Device Role / Timing Role: Secondary 5V supply for microcontroller and CAN transceiver - handles cold-crank (6.5V) and load-dump (40V) transients. Use Value: 620mV dropout ensures regulation during cranking; thermal shutdown prevents latch-up during prolonged actuator stall conditions. |
| Portable Medical Monitor | Smart Energy Meter |
|
Use Scenario: Handheld ECG device powered by rechargeable Li-ion with USB charging and BLE connectivity. IC Role / Device Role / Timing Role: Clean 5V rail for analog signal chain and Bluetooth SoC - isolated from noisy USB/charger paths. Use Value: 58dB PSRR at 100Hz rejects switching noise from USB charger ICs; ±2% accuracy ensures consistent ADC reference scaling. |
Use Scenario: DIN-rail mounted electricity meter with PLC communication, RTC, and LCD display operating from 230VAC-derived 24V supply. IC Role / Device Role / Timing Role: Isolated 5V supply for metrology ASIC and real-time clock - decoupled from main 3.3V digital rail. Use Value: QFN6 package fits tight spacing between isolation barrier and meter housing; 125°C rating supports sealed enclosure thermal buildup. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-quiescent-current linear regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TI TPS7B6750QDCYRQ1 | 40V input, 5V fixed, 3.5µA IQ, but requires ≥1µF output cap and lacks adjustable option. | Automotive AEC-Q100 qualified; better ESD rating (4kV HBM) but higher dropout (750mV @ 150mA). | Select when AEC-Q100 compliance is mandatory and thermal margin exceeds 15°C above ambient. |
| Analog Devices ADM7172ACPZ-5-R7 | 6.5V max input, 5V fixed, 250µA IQ, lower noise (9µV RMS), but incompatible with >6.5V sources. | Optimized for high-precision analog circuits (e.g., DAC reference); unsuitable for battery or 24V industrial inputs. | Choose only for low-noise 5V rails downstream of primary regulation - not a drop-in replacement for MP2013AGG-5-Z. |
Compared with TPS7B6750QDCYRQ1 and ADM7172ACPZ-5-R7, MP2013AGG-5-Z uniquely balances ultra-low IQ, 40V input capability, and QFN6 footprint - making it optimal for space-constrained, wide-input industrial and automotive subsystems where thermal headroom is limited and long battery life is essential.
Availability
MP2013AGG-5-Z is available at Aetrix Electronics and suitable for industrial sensor nodes, automotive body controllers, and portable medical monitors requiring stable component supply with guaranteed long-term availability and traceable sourcing.
Supply support for MP2013AGG-5-Z includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with over two decades of expertise in DC/DC converters, LDOs, motor drivers, and LED drivers.
The MP2013A product line targets ultra-low-power, high-input-voltage regulation for battery-backed and harsh-environment applications - designed specifically to replace legacy 78xx-style regulators with modern efficiency, protection, and integration.
FAQ
What is the minimum input voltage required for MP2013AGG-5-Z to regulate 5V output?
The MP2013AGG-5-Z requires a minimum input voltage of 5.62V to maintain regulation at 150mA load, based on its 620mV dropout specification. At lighter loads, regulation begins at VIN ≥ 5.0V + VDROPOUT (e.g., ~5.1V at 1mA). Below 2.5V, the device is outside absolute maximum ratings and must not be operated.
Can MP2013AGG-5-Z be used with ceramic output capacitors smaller than 1µF?
Yes - the MP2013AGG-5-Z is stable with ceramic output capacitors as low as 0.47µF (X5R/X7R dielectric), per datasheet Section 8.1. Using smaller values reduces board area and cost but may increase output voltage ripple under fast load transients; 1µF is recommended for general-purpose designs.
Is the EN pin internally pulled up or does it require an external pull-up resistor?
The EN pin has no internal pull-up; it must be actively driven high (≥1.48V) to enable regulation. For automatic startup, connect EN directly to IN. If controlled by a microcontroller GPIO, ensure drive strength meets the 0.1µA EN input current spec and voltage thresholds (1.26V fall / 1.48V rise).
Does MP2013AGG-5-Z include reverse-voltage protection on the IN pin?
No - the MP2013AGG-5-Z lacks internal reverse-voltage protection. Its PMOS pass transistor contains a body diode that conducts from OUT to IN if VOUT > VIN, potentially causing destructive reverse current. An external Schottky diode in series with IN is required in backup-battery or dual-supply configurations.
How does thermal performance differ between QFN6 and QFN8 packages for MP2013A?
The QFN6 (2mm×2mm) has θJA = 80°C/W versus 48°C/W for QFN8 (3mm×3mm), meaning identical power dissipation yields ~32°C higher junction temperature in QFN6. For 150mA at 5V output with 24V input (19V dropout × 0.15A = 2.85W), QFN6 exceeds its 1.25W PD(max) rating - requiring careful thermal design or derating.
What is the FB pin voltage and can it be used to adjust the output of MP2013AGG-5-Z?
The FB pin is internally tied to the 5V output and regulated to 1.215V nominal in adjustable versions, but in MP2013AGG-5-Z (fixed 5V), FB is not connected to the internal divider and must remain floating. External adjustment is not supported - output is factory-trimmed and non-configurable.
Is MP2013AGG-5-Z RoHS-compliant and lead-free?
Yes - MP2013AGG-5-Z is fully RoHS-compliant and lead-free, per MPS corporate policy and documentation in the datasheet footer. All MPS products adhere to EU RoHS Directive 2011/65/EU and are green-status qualified, with no exemptions applied.
MP2013AGG-5-Z Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- 6-VDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.85V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 7 µA
- Current - Supply (Max):
- 47 µA
- PSRR:
- 58dB ~ 55dB (100Hz ~ 100kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-QFN (2x2)
MP2013AGG-5-Z FAQ
1.How can I place an order for MP2013AGG-5-Z through Aetrix?
Please submit a Request for Quotation (RFQ) for MP2013AGG-5-Z on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MP2013AGG-5-Z reliable?
The price and inventory of MP2013AGG-5-Z are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MP2013AGG-5-Z is usually 5 days.
3.What payment methods are accepted for MP2013AGG-5-Z?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MP2013AGG-5-Z transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MP2013AGG-5-Z?
MP2013AGG-5-Z orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MP2013AGG-5-Z order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MP2013AGG-5-Z?
For technical support, including MP2013AGG-5-Z datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MP2013AGG-5-Z requirements.
6.How does Aetrix verify that MP2013AGG-5-Z is sourced from the original manufacturer or authorized distributors?
All MP2013AGG-5-Z products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MP2013AGG-5-Z meets industry standards.
7.What is the process for return or replacement of MP2013AGG-5-Z?
All MP2013AGG-5-Z units undergo pre-shipment inspection (PSI). If there is an issue with MP2013AGG-5-Z, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MP2013AGG-5-Z part is unused and in its original packaging.
Return procedure for MP2013AGG-5-Z:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MP2013AGG-5-Z Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
