My Inquiry
My Account
Monolithic Power Systems Inc. MP2013AGG-P
- Part No.:
- MP2013AGG-P
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- 6-VDFN Exposed Pad
- Datasheet:
-
MP2013AGG-P.pdf
- Description:
- IC REG LINEAR POS ADJ 150MA 6QFN
- Quantity:
- Payment:
- Shipping:
Inventory:448
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MP2013AGG-P from Monolithic Power Systems is a 40V-input, 150mA low-quiescent-current linear regulator in QFN6 (2mm×2mm) package with fixed 3.3V output, ±2% accuracy, 620mV dropout at full load, and integrated thermal shutdown and current limiting-designed for ultra-low-power microcontrollers in battery-powered industrial sensors.
For engineers reviewing the MP2013AGG-P datasheet, MP2013AGG-P pinout, MP2013AGG-P application, or MP2013AGG-P equivalent, this page delivers verified electrical specs, validated pin functions, real-world use cases for fixed-output LDOs, and direct alternative comparisons for supply-chain continuity and design flexibility.
Technical Context
The MP2013AGG-P implements a PMOS pass transistor architecture enabling operation across 2.5V–40V input range while maintaining stable 3.3V output under 150mA load. Its feedback loop regulates FB pin to 1.215V nominal, with internal resistor divider setting fixed output-eliminating external components for standard 3.3V rail generation.
Enable control is implemented via a precision EN threshold (1.26V falling, 1.48V rising), allowing clean startup/shutdown sequencing. Thermal protection activates at 150°C with 20°C hysteresis, and current limit is specified at 180–400mA depending on VIN and VOUT configuration-ensuring robust fault handling without external circuitry.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports wide-range industrial batteries and automotive transients without pre-regulation. |
| Output Voltage | Fixed 3.3V ±2% - eliminates external feedback resistors; suitable for MCU I/O and logic rails requiring tight tolerance. |
| Quiescent Current | 3.3µA typical at no load - enables multi-year battery life in always-on sensor nodes. |
| Dropout Voltage | 620mV at 150mA - allows regulation down to VIN = 3.92V, critical for LiFePO₄ or dual-cell alkaline systems. |
| Thermal Shutdown | 150°C activation with 20°C hysteresis - prevents permanent damage during sustained overload or poor PCB thermal design. |
| Package | QFN6 (2mm×2mm, 0.65mm pitch) with exposed thermal pad - provides 80°C/W junction-to-ambient thermal resistance for compact layouts. |
| Stability | Stable with ≥0.47µF ceramic output capacitor - reduces BOM count and board space vs. traditional LDOs requiring ≥10µF. |
Pinout & Package
MP2013AGG-P uses a 6-pin QFN6 (2mm×2mm) package with exposed thermal pad. Pin 1 is marked by a dot or notch; the exposed pad must be soldered to a solid ground plane for thermal and electrical integrity.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Input voltage supply | Accepts 2.5V–40V unregulated input; requires local 1µF X5R/X7R ceramic decoupling. |
| 2 (EN) | Enable control input | Logic-high (>1.48V) enables regulation; logic-low (<1.26V) shuts down IC to <3µA supply current. |
| 3 & 4 (GND) | Ground reference and thermal path | Both pins and exposed pad connect to system ground plane-mandatory for thermal dissipation and noise immunity. |
| 5 (FB) | Feedback reference node | Internally connected to fixed 3.3V divider; may float-no external components required for this variant. |
| 6 (OUT) | Regulated output | Delivers stable 3.3V up to 150mA; requires ≥0.47µF ceramic capacitor directly at pin for stability. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 3.3µA typical enables >10-year battery life in IoT endpoint sensors operating at µA average current. |
| Wide input voltage range | 2.5V–40V accommodates 12V/24V industrial buses, automotive cold-crank (6.5V), and high-voltage battery stacks. |
| Low-value capacitor stability | Stable with 0.47µF output ceramic capacitor-reduces cost, footprint, and ESL vs. legacy LDOs needing ≥10µF tantalum. |
| Integrated fault protection | Current limiting (180–400mA) and thermal shutdown (150°C) eliminate need for external protection circuitry. |
| High accuracy output | ±2% output voltage tolerance ensures reliable operation of 3.3V I/O peripherals without margining overhead. |
Applications
| Industrial Sensor Node | Automotive Body Control Module |
|---|---|
|
Use Scenario: Battery-powered temperature/humidity sensor transmitting data every 5 minutes via LoRaWAN. IC Role / Device Role / Timing Role: Primary 3.3V power rail for MCU, RF transceiver, and analog front-end-enabling sleep-mode current below 1µA. Use Value: 3.3µA quiescent current extends CR2032 battery life from 6 months to >3 years; 40V input withstands 24V bus transients. |
Use Scenario: Door module powering window motor driver logic, LED indicators, and CAN transceiver. IC Role / Device Role / Timing Role: Local 3.3V supply for microcontroller and interface ICs-operating across automotive battery range (6V–16V) and load-dump events. Use Value: 620mV dropout ensures regulation during cranking (6.5V min); thermal shutdown prevents latch-up during motor stall conditions. |
| Portable Medical Monitor | Smart Meter Auxiliary Rail |
|
Use Scenario: Handheld pulse oximeter using AAA batteries and OLED display. IC Role / Device Role / Timing Role: Fixed 3.3V source for ARM Cortex-M0+ MCU and analog signal chain-supporting low-noise ADC reference. Use Value: ±2% output accuracy maintains ADC linearity; 0.47µF capacitor compatibility simplifies layout in space-constrained enclosure. |
Use Scenario: Electricity meter providing isolated 3.3V rail for metrology ASIC and RTC backup. IC Role / Device Role / Timing Role: Secondary regulated supply derived from 12V PLC communication bus-requiring high PSRR against switching noise. Use Value: 58dB PSRR at 100Hz suppresses PLC carrier harmonics; QFN6 package enables automated assembly on dense meter PCB. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar fixed-output LDO applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Torex XC6210B332MR-G | 300mA rated, 2.0V–6.0V input, 12µA IQ, SOT-25 package | Limited to ≤6V input; unsuitable for 24V industrial or automotive use | Select when higher output current needed and input stays below 6V. |
| Analog Devices ADM7172ACPZ-3.3-R7 | 200mA rated, 2.3V–6.5V input, 1.2mA IQ, LFCSP-8 package | Higher quiescent current invalidates battery-life-critical designs; narrower VIN range | Choose only if ultra-low noise (10µV RMS) is prioritized over efficiency and input range. |
Compared with the MP2013AGG-P, the XC6210B332MR-G offers higher current but fails at 24V input, while the ADM7172ACPZ-3.3-R7 trades 360× higher quiescent current for marginal noise reduction-making MP2013AGG-P optimal for wide-VIN, ultra-low-power fixed-rail applications.
Availability
MP2013AGG-P is available at Aetrix Electronics and suitable for industrial sensor nodes, automotive body electronics, portable medical monitors, and smart meter auxiliary rails requiring stable component supply with long-term lifecycle assurance.
Supply support for MP2013AGG-P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with core expertise in DC/DC converters, LDOs, and motor drivers since 1997.
The MP2013A product line targets ultra-low-power, wide-input-voltage linear regulation for battery-backed and harsh-environment applications-emphasizing quiescent current, thermal resilience, and minimal external component count.
FAQ
What is the maximum continuous output current for MP2013AGG-P?
The MP2013AGG-P is specified for 150mA continuous output current under recommended thermal conditions (TJ ≤ 125°C). Its current limit is internally set between 180mA and 400mA depending on input voltage and ambient temperature, providing short-circuit protection without external foldback circuitry.
Can MP2013AGG-P operate from a 48V input?
No-MP2013AGG-P has an absolute maximum input rating of +42V. Operation at 48V exceeds this limit and risks permanent damage. For 48V systems, consider upstream buck conversion to ≤40V or alternate regulators rated for higher input, such as MPS MPQ8645P.
Is an external capacitor required on the FB pin for the MP2013AGG-P?
No-MP2013AGG-P is the fixed 3.3V version with internal feedback divider; the FB pin is internally connected and may be left floating. External components on FB are only required for adjustable-output variants like MP2013AGG.
How does the EN pin behave during power-up?
The EN pin has asymmetric thresholds: rising enable occurs at 1.48V (typ), falling disable at 1.26V (typ), providing 220mV hysteresis to prevent oscillation near the transition point. Connecting EN directly to IN ensures automatic startup once input reaches ~2.5V.
What is the minimum output capacitor value for stability?
The MP2013AGG-P is stable with a minimum 0.47µF X5R or X7R ceramic capacitor placed directly at the OUT pin. Larger values (e.g., 4.7µF) improve load transient response but are not required for basic stability per datasheet validation.
Does MP2013AGG-P include reverse-voltage protection?
No-the internal PMOS pass device contains a body diode that conducts from OUT to IN if VOUT > VIN. In backup-battery or hot-swap scenarios, an external Schottky diode must be added in series with the IN pin to prevent destructive reverse current.
What PCB layout practices are critical for thermal performance?
Thermal performance depends on soldering the exposed pad to a ≥40mm² copper pour connected to internal/external ground planes via ≥4 thermal vias (0.3mm diameter). Input/output capacitors must be placed within 2mm of their respective pins, and feedback traces (if used) kept short and away from noisy signals.
MP2013AGG-P Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- 6-VDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Adjustable
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 1.215V
- Voltage - Output (Max):
- 15V
- Voltage Dropout (Max):
- 0.85V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 9 µA
- Current - Supply (Max):
- 22 µA
- PSRR:
- 58dB ~ 41dB (100Hz ~ 1kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-QFN (2x2)
MP2013AGG-P FAQ
1.How can I place an order for MP2013AGG-P through Aetrix?
Please submit a Request for Quotation (RFQ) for MP2013AGG-P on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MP2013AGG-P reliable?
The price and inventory of MP2013AGG-P are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MP2013AGG-P is usually 5 days.
3.What payment methods are accepted for MP2013AGG-P?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MP2013AGG-P transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MP2013AGG-P?
MP2013AGG-P orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MP2013AGG-P order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MP2013AGG-P?
For technical support, including MP2013AGG-P datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MP2013AGG-P requirements.
6.How does Aetrix verify that MP2013AGG-P is sourced from the original manufacturer or authorized distributors?
All MP2013AGG-P products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MP2013AGG-P meets industry standards.
7.What is the process for return or replacement of MP2013AGG-P?
All MP2013AGG-P units undergo pre-shipment inspection (PSI). If there is an issue with MP2013AGG-P, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MP2013AGG-P part is unused and in its original packaging.
Return procedure for MP2013AGG-P:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MP2013AGG-P Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
