My Inquiry
My Account
Monolithic Power Systems Inc. MP2192CGC-P
- Part No.:
- MP2192CGC-P
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- 6-UFBGA, WLCSP
- Datasheet:
-
MP2192CGC-P.pdf
- Description:
- IC REG BUCK ADJ 2A 6WLCSP
- Quantity:
- Payment:
- Shipping:
Inventory:500
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MP2192CGC-P from Monolithic Power Systems is a 2A synchronous step-down DC-DC converter with forced PWM mode, constant-on-time (COT) control, and integrated 75mΩ P-channel and 45mΩ N-channel MOSFETs. It operates from 2.5V to 5.5V input, delivers adjustable output down to 0.6V, and targets space-constrained portable power rails in wireless cards and battery-powered devices.
For engineers reviewing the MP2192CGC-P datasheet, MP2192CGC-P pinout, MP2192CGC-P application, or MP2192CGC-P equivalent, key selection criteria include its 1.1MHz fixed switching frequency, 1% FB voltage accuracy, 1.2ms soft-start time, output discharge capability, and WLCSP-6 package thermal performance for high-density PCB layouts.
Technical Context
The MP2192CGC-P employs constant-on-time (COT) control with VIN feed-forward to maintain stable 1.1MHz switching across its 2.5V–5.5V input range and 0.6V–5.5V output range. Its internal power stage integrates complementary P/N-channel MOSFETs with on-resistances of 75mΩ and 45mΩ, enabling up to 2A continuous output current with minimal external components.
Fault protection includes cycle-by-cycle current limiting (4A peak), hiccup-mode short-circuit protection, thermal shutdown at 160°C, and dual-stage over-voltage protection-dynamic regulation triggered at 117% VREF and hard shutdown at 6.2V VIN. EN pin logic thresholds (1.2V high, 0.4V low) support precise power sequencing in multi-rail systems.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input voltage range | 2.5V to 5.5V - supports single-cell Li-ion, USB, and regulated 3.3V/5V rails without pre-regulation. |
| Output current | 2A continuous - sustains full load under worst-case thermal conditions (θJA = 141°C/W, TA ≤ 85°C). |
| Feedback voltage | 600mV ±1% - enables precise output regulation with <±12mV error across temperature and load. |
| Switching frequency | 1.1MHz - allows compact 1µH inductors and reduces EMI filtering burden in noise-sensitive RF sections. |
| Internal MOSFET RDS(ON) | 75mΩ (HS), 45mΩ (LS) - minimizes conduction loss and improves efficiency above 85% at 1.2V/2A (VIN=5V). |
| Soft-start time | 1.2ms - prevents inrush current and output overshoot during cold start in battery-powered systems. |
| OVP threshold | 117% of VFB - triggers dynamic low-side discharge before catastrophic overvoltage occurs at the load. |
Pinout & Package
MP2192CGC-P is housed in a 6-ball WLCSP package (0.85mm × 1.25mm, 0.4mm pitch), optimized for ultra-thin portable designs and requiring no solder mask defined pads per JEDEC MO-211.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1 GND | Power ground reference | Primary return path for high-frequency switching current; must connect directly to solid ground plane beneath IC. |
| A2 OUT | Output voltage sense and power rail | Connects to output capacitor anode; serves as both power delivery node and feedback reference point for stability. |
| B1 SW | Switching node | Drain of internal high-side MOSFET; connects to inductor; requires shortest possible trace to minimize EMI and voltage ringing. |
| B2 EN | Enable control input | Active-high logic interface (1.2V min); internal 1MΩ pulldown enables default-disable behavior when floating. |
| C1 VIN | Input supply | Accepts 2.5V–5.5V unregulated input; requires local 22µF ceramic decoupling placed within 2mm of pin. |
| C2 FB | Feedback input | Senses resistor divider ratio; 100nA bias current enables use of 200kΩ/200kΩ network for 1.2V output with low leakage error. |
Key Features
| Feature | Design Value |
|---|---|
| Forced PWM operation | Maintains continuous conduction mode (CCM) across full 0–2A load range, eliminating audible noise and ensuring consistent EMI profile. |
| Output discharge function | Activates internal 13Ω discharge FET upon EN deactivation, rapidly collapsing VOUT to prevent hold-up or back-powering of downstream circuitry. |
| 1% FB voltage accuracy | Reduces output tolerance stack-up in multi-converter systems, enabling tighter margining for low-voltage I/O rails like 1.2V DDR or 1.8V logic. |
| 100% duty cycle capability | Allows dropout operation down to VOUT ≈ VIN − 0.1V, supporting applications where input may dip near output voltage (e.g., Li-ion discharge). |
| Hiccup-mode SCP | Limits average fault power to <50mW during sustained short, preventing thermal runaway while allowing automatic recovery once fault clears. |
Applications
| Wireless Networking Cards | Portable Instrumentation |
|---|---|
|
Use Scenario: Powering 1.2V RF transceiver ICs and baseband processors in mini-PCIe Wi-Fi 6 modules with strict board area constraints. IC Role / Device Role / Timing Role: Primary buck regulator delivering clean, low-noise 1.2V/2A rail with fast transient response to handle burst TX current demands. Use Value: 1.1MHz switching enables use of 1µH shielded inductor occupying <1.5mm² footprint; WLCSP-6 package fits within 3mm × 3mm keep-out zone. |
Use Scenario: Supplying 1.8V analog front-end and 3.3V microcontroller in handheld multimeters and oscilloscope probes. IC Role / Device Role / Timing Role: Dual-output capable via resistor reconfiguration; provides stable low-noise bias for precision ADC references and op-amps. Use Value: 1% FB accuracy ensures <±18mV output error at 1.8V, meeting 12-bit ADC reference stability requirements without post-regulation LDO. |
| Battery-Powered Medical Sensors | Low-Voltage I/O System Power |
|
Use Scenario: Regulating 2.5V sensor bias and 3.3V BLE SoC supply in wearable ECG patches powered by coin-cell or thin-film batteries. IC Role / Device Role / Timing Role: High-efficiency step-down converter operating down to 2.5V VIN, with ultra-low quiescent current (450µA) in active mode. Use Value: 87% efficiency at 2.5VIN/2.5VOUT/100mA extends battery life >20% vs. legacy 2.25MHz converters; output discharge prevents sensor latch-up during sleep transitions. |
Use Scenario: Generating 0.6V core voltage for FPGA I/O banks or ASIC SerDes interfaces in compact edge AI accelerators. IC Role / Device Role / Timing Role: Precision adjustable buck supplying sub-1V rails with tight DC accuracy and low AC ripple (<10mVpp). Use Value: 600mV ±6mV FB reference and COT control achieve <5mV load transient deviation at 1A/µs slew rate, meeting JESD22-A114 reliability thresholds. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar synchronous step-down converter applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPS628641RQYR | 1.8V–5.5V input, 3A output, 2.25MHz fSW, 0.6V FB, but no output discharge or hiccup SCP. | Higher current and frequency suit higher-power SoCs; lacks output discharge needed for safe power sequencing in multi-rail sensors. | Select when >2A load or >2MHz EMI filtering is required; verify external discharge circuit if sequencing critical. |
| RTQ2134BGQW | 2.5V–5.5V input, 2A output, 1.5MHz fSW, 0.6V FB, includes light-load DCM but no forced PWM mode. | Superior light-load efficiency due to DCM; variable frequency causes EMI spread-spectrum challenges in RF coexistence designs. | Prefer for always-on battery monitors; avoid where fixed-frequency EMI control is mandatory (e.g., near GPS receivers). |
Compared with TPS628641RQYR and RTQ2134BGQW, MP2192CGC-P uniquely combines forced PWM, output discharge, and WLCSP-6 size-making it optimal for space-limited, sequenced, noise-sensitive 2A applications where CCM stability and rapid shutdown are non-negotiable.
Availability
MP2192CGC-P is available at Aetrix Electronics and suitable for wireless networking cards, portable instrumentation, and battery-powered medical sensors requiring stable component supply with guaranteed long-term availability and RoHS-compliant packaging.
Supply support for MP2192CGC-P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance power management ICs, with over 20 years of expertise in DC-DC conversion, motor drivers, and LED lighting controllers.
The MP2192 series belongs to MPS's ultra-compact buck converter product line, engineered specifically for portable and space-constrained applications demanding high efficiency, small footprint, and robust protection in sub-3mm² layouts.
FAQ
What is the minimum recommended output capacitance for stable operation?
The MP2192CGC-P requires ≥10µF ceramic output capacitance with X5R/X7R dielectric for stable regulation. Typical designs use 22µF to limit output ripple to <10mVpp at 2A load. Lower values risk instability under transient loads, especially with high-ESR capacitors or long PCB traces.
Does MP2192CGC-P support adjustable soft-start time?
No-the soft-start time is fixed at 1.2ms and not user-adjustable. This value is internally set by the SS capacitor and ramp generator; no external component modifies it. The 1.2ms duration balances inrush current limitation with startup speed for most portable applications.
Can MP2192CGC-P operate with input voltage below 2.5V?
No-it has a hard under-voltage lockout (UVLO) threshold of 2.3V (rising) and will not switch below 2.5V input. Operation below this range risks erratic behavior or failure to regulate; for sub-2.5V inputs, consider the MP2158 (1.8V–5.5V) or MP2161 (0.8V–5.5V) families instead.
How does the output discharge function behave during EN deactivation?
When EN falls below 0.4V, the MP2192CGC-P disables switching and activates an internal 13Ω NMOS discharge path between OUT and GND. This discharges a 22µF output capacitor from 1.2V to 0.1V in ~2.5ms, preventing back-powering or latch-up in downstream logic.
Is the WLCSP-6 package compatible with standard reflow profiles?
Yes-the MP2192CGC-P WLCSP-6 package is qualified for IPC/JEDEC J-STD-020D reflow, with peak temperature up to 260°C and MSL Level 1 rating. No special baking or handling is required; standard SnAgCu paste and 240°C peak profile yield >99.9% assembly yield on 2-layer boards.
What inductor series is validated for optimal performance?
MPS's MPL-AL4020 series (e.g., MPL-AL4020-1R0, 1µH) is fully characterized and recommended. These shielded metal-alloy inductors feature <10.1mΩ DCR, high saturation current (>3.5A), and low EMI radiation-enabling >90% efficiency at 1.2V/2A with minimal layout sensitivity.
Does MP2192CGC-P require external compensation components?
No-its constant-on-time (COT) control architecture is inherently stable with the specified 22µF ceramic output capacitor and 1µH inductor. No external compensation network (e.g., type-II/III compensator) is needed, reducing BOM count and layout complexity.
MP2192CGC-P Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- 6-UFBGA, WLCSP
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Function:
- Step-Down
- Output Configuration:
- Positive
- Topology:
- Buck
- Output Type:
- Adjustable
- Number of Outputs:
- 1
- Voltage - Input (Min):
- 2.5V
- Voltage - Input (Max):
- 5.5V
- Voltage - Output (Min/Fixed):
- 0.6V
- Voltage - Output (Max):
- 5.5V
- Current - Output:
- 2A
- Frequency - Switching:
- 1.1MHz
- Synchronous Rectifier:
- Yes
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-WLCSP (0.85x1.25)
MP2192CGC-P FAQ
1.How can I place an order for MP2192CGC-P through Aetrix?
Please submit a Request for Quotation (RFQ) for MP2192CGC-P on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MP2192CGC-P reliable?
The price and inventory of MP2192CGC-P are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MP2192CGC-P is usually 5 days.
3.What payment methods are accepted for MP2192CGC-P?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MP2192CGC-P transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MP2192CGC-P?
MP2192CGC-P orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MP2192CGC-P order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MP2192CGC-P?
For technical support, including MP2192CGC-P datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MP2192CGC-P requirements.
6.How does Aetrix verify that MP2192CGC-P is sourced from the original manufacturer or authorized distributors?
All MP2192CGC-P products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MP2192CGC-P meets industry standards.
7.What is the process for return or replacement of MP2192CGC-P?
All MP2192CGC-P units undergo pre-shipment inspection (PSI). If there is an issue with MP2192CGC-P, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MP2192CGC-P part is unused and in its original packaging.
Return procedure for MP2192CGC-P:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MP2192CGC-P Tags
-
TPS562201DDCR
Texas Instruments
-
MC34063ABD-TR
STMicroelectronics
-
TPS561201DDCR
Texas Instruments
-
MC33063ADR
Texas Instruments
-
MC34063ADR
Texas Instruments
-
TPS560200DBVR
Texas Instruments
-
AP3012KTR-G1
Diodes Incorporated
-
TLV61048DBVR
Texas Instruments
-
AZ34063UMTR-G1
Diodes Incorporated
-
TPS562200DDCR
Texas Instruments
-
AP62300TWU-7
Diodes Incorporated
-
MC34063EBD-TR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
