My Inquiry
My Account
Monolithic Power Systems Inc. MP5121DJ-LF-P
- Part No.:
- MP5121DJ-LF-P
- Manufacturer:
- Monolithic Power Systems Inc.
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- SOT-23-5 Thin, TSOT-23-5
- Datasheet:
-
MP5121DJ-LF-P.pdf
- Description:
- IC OPAMP GP 1 CIRCUIT TSOT23-5
- Quantity:
- Payment:
- Shipping:
Inventory:3,330
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MP5121DJ-LF-P from Monolithic Power Systems is a single-channel, high-speed, rail-to-rail input-output operational amplifier optimized for voltage reference buffering in TFT-LCD display drive circuits. It delivers 20MHz –3dB bandwidth, 45V/μs slew rate, and operates from 3.2V to 20V single supply with 1.6mA quiescent current per amplifier. Its output swings within 100mV of both rails and supports ±50mA output drive capability.
For engineers reviewing the MP5121DJ-LF-P datasheet, MP5121DJ-LF-P pinout, MP5121DJ-LF-P application in TFT-LCD biasing or sampling ADC buffering, or MP5121DJ-LF-P equivalent for portable instrumentation signal conditioning, this page provides verified electrical parameters, package mapping, real-world use context, and validated alternatives aligned with Monolithic Power's official Rev. 0.91 specification.
Technical Context
The MP5121 employs dual-input-stage architecture-PNP differential pair for inputs 0.5V below negative rail up to 1V below positive rail, switching to NPN pair for rail-to-rail extension beyond that-enabling true rail-to-rail input operation across ±8V common-mode range at 20V supply. This architecture introduces measurable transition distortion near supply rails.
Its output stage delivers ±50mA continuous current with short-circuit protection and thermal shutdown, but current sourcing/sinking capability degrades as output voltage approaches either rail. The device is unity-gain stable and exhibits 50° phase margin with 10kΩ load and 10pF capacitive load.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| –3dB Bandwidth | 20MHz at RL = 10kΩ, CL = 10pF - enables fast settling in LCD gamma correction and active filter stages. |
| Slew Rate | 45V/μs - supports rapid voltage transitions required in TFT gate driver reference buffering. |
| Supply Voltage Range | 3.2V to 20V single supply - accommodates wide-input portable and industrial display power rails. |
| Output Swing | Within 100mV of VS+ and VS− - preserves dynamic range in low-voltage bias networks. |
| Input Common-Mode Range | VS− − 0.5V to VS+ + 0.5V - allows direct connection to DAC outputs or resistive divider taps without level-shifting. |
| Supply Current (per amp) | 1.6mA at no load - balances speed and power efficiency for battery-powered handheld displays. |
| Open-Loop Gain | 50–60dB (100–1000 V/V) - sufficient for precision buffer applications with <0.1% gain error at unity gain. |
Pinout & Package
MP5121DJ-LF-P is housed in a 5-pin TSOT23-5 package (JEDEC MO-193, variation AA), with 0.65mm pitch, 1.00mm max height, and exposed pad not electrically connected. Thermal resistance θJA = 220°C/W on standard 4-layer PCB.
| Pin | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Inverting Input (VIN−) | Accepts feedback or inverted signal path; rail-to-rail capable down to VS− −0.5V. |
| 2 | Non-Inverting Input (VIN+) | Accepts reference or sensor input; same rail-to-rail range as VIN−. |
| 3 | Ground / Negative Supply (VS−) | Reference node for single-supply operation; also serves as return path for 50mA output current. |
| 4 | Output (VOUT) | Delivers buffered signal with ±50mA drive; swing limited to within 100mV of VS− or VS+. |
| 5 | Positive Supply (VS+) | Single-supply input pin; accepts 3.2V–20V; requires local 0.1μF + 10μF decoupling per layout guidelines. |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail input with dual differential pair | Enables direct interface to DACs or resistive dividers spanning full supply range without external level shifters. |
| 45V/μs slew rate with 20MHz bandwidth | Supports sub-microsecond settling in gamma voltage generation for high-refresh-rate TFT panels. |
| ±50mA output drive capability | Drives capacitive loads up to 1000pF directly-reducing need for external buffer stages in LCD column drivers. |
| Unity-gain stable with 50° phase margin | Eliminates need for external compensation in voltage follower configurations used for reference buffering. |
| Low 1.6mA supply current per amplifier | Reduces thermal load in densely packed display controller boards while maintaining high-speed performance. |
Applications
| TFT-LCD Gamma Reference Buffering | Portable Instrumentation Signal Conditioning |
|---|---|
|
Use Scenario: Generating precise, stable gamma correction voltages for TFT panel source drivers using resistor ladders driven by DACs. IC Role / Device Role / Timing Role: Voltage follower buffer isolating DAC output from ladder network capacitance and ensuring rail-to-rail compliance. Use Value: 100mV rail margin and 45V/μs slew rate maintain linearity and speed across full 0–20V gamma range without added settling delay. |
Use Scenario: Amplifying low-level sensor signals (e.g., thermistor, photodiode) in handheld multimeters or data loggers. IC Role / Device Role / Timing Role: Single-supply transimpedance or non-inverting amplifier operating from 3.3V or 5V battery rails. Use Value: Rail-to-rail input allows full utilization of ADC input range; 20MHz bandwidth supports oversampling and noise filtering. |
| Sampling ADC Driver | Touch-Screen Display Analog Front-End |
|
Use Scenario: Driving SAR or sigma-delta ADC inputs in portable medical or test equipment requiring fast acquisition and low distortion. IC Role / Device Role / Timing Role: Unity-gain buffer with low output impedance and fast settling to minimize acquisition errors during hold phase. Use Value: 500ns settling to 0.1% ensures accurate sampling at >1MSPS rates without aperture jitter degradation. |
Use Scenario: Conditioning analog touch coordinates from resistive or capacitive touch overlays before digitization. IC Role / Device Role / Timing Role: Low-noise, high-impedance buffer amplifying weak touch voltage signals in noisy mobile environments. Use Value: 85dB CMRR and 70–95dB PSRR suppress noise coupling from backlight inverters and RF sections in compact form factors. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-speed, single-supply rail-to-rail op amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLV2461IDBVR | 1.2MHz GBW, 0.5V/μs slew rate, 600μA IQ - significantly slower and lower drive than MP5121. | Targeted at low-power sensor interfaces, not high-speed display buffering. | Select only if bandwidth <2MHz and current drive <10mA suffice; not suitable for TFT gamma or fast ADC driving. |
| AD8605ARTZ-REEL7 | 10MHz GBW, 5V/μs slew rate, 1mA IQ, rail-to-rail I/O - moderate speed, higher precision (30μV VOS), but lower output current (50mA peak, not continuous). | Better for precision instrumentation; lacks sustained 50mA drive needed for capacitive LCD loads. | Prefer when offset voltage <50μV and drift <0.5μV/°C are critical; avoid where sustained 50mA output into 1000pF is required. |
Compared with TLV2461IDBVR and AD8605ARTZ-REEL7, MP5121DJ-LF-P uniquely combines 20MHz bandwidth, 45V/μs slew rate, and guaranteed ±50mA continuous output in a 5-pin TSOT - making it the only option among the three qualified for high-refresh TFT-LCD reference buffering and fast-settling ADC driver roles.
Availability
MP5121DJ-LF-P is available at Aetrix Electronics and suitable for TFT-LCD display modules, portable instrumentation front-ends, and touch-screen analog signal chains requiring stable component supply, RoHS-compliant packaging, and long-term production continuity.
Supply support for MP5121DJ-LF-P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, headquartered in Kirkland, WA, with global design and support operations.
The MP5121 belongs to MPS's high-speed operational amplifier product line, engineered specifically for demanding display biasing, portable instrumentation, and fast-signal conditioning applications where rail-to-rail operation, speed, and output drive intersect.
FAQ
What is the maximum continuous output current rating for MP5121DJ-LF-P?
The MP5121DJ-LF-P is rated for ±50mA continuous output current under specified thermal conditions. This rating assumes proper PCB layout with adequate copper area and thermal vias, and junction temperature remains ≤125°C. Output current capability decreases when VOUT approaches VS+ or VS− due to internal headroom limitations.
Does MP5121DJ-LF-P require external compensation for unity-gain stability?
No. The MP5121DJ-LF-P is internally compensated and unity-gain stable across its full operating range. Electrical testing confirms ≥50° phase margin with 10kΩ load and 10pF capacitive load, eliminating the need for external compensation components in voltage-follower or gain-of-one configurations.
Can MP5121DJ-LF-P operate from a 3.3V single supply in portable designs?
Yes. The MP5121DJ-LF-P supports single-supply operation from 3.2V to 20V. At 3.3V, it maintains rail-to-rail input (–0.5V to +3.8V) and output swing within 100mV of both rails (0.1V to 3.2V), enabling full dynamic range usage in 3.3V microcontroller-based systems.
What is the input offset voltage specification over temperature for MP5121DJ-LF-P?
The typical input offset voltage is 2mV at 25°C, with a maximum of 20mV over the full –40°C to +85°C operating range. Average offset voltage drift is 5μV/°C, measured across temperature sweeps per Monolithic Power's Rev. 0.91 datasheet Section "ELECTRICAL CHARACTERISTICS".
Is the TSOT23-5 package of MP5121DJ-LF-P lead-free and RoHS compliant?
Yes. The "-LF" suffix in MP5121DJ-LF-P explicitly denotes lead-free, RoHS-compliant packaging per EU Directive 2011/65/EU. The device uses matte tin plating on leads and meets JEDEC J-STD-020 moisture sensitivity level 1 (MSL-1) for unlimited floor life at ≤30°C/60% RH.
How does the dual-input-stage architecture affect distortion near supply rails?
The MP5121 switches between PNP and NPN input differential pairs near the rails, causing measurable crossover distortion and degraded CMRR (<60dB) when VIN is within 1V of either supply. Layout guidance recommends avoiding sustained operation in this region for audio or precision DC applications.
What decoupling capacitance is recommended for MP5121DJ-LF-P in high-speed layouts?
Monolithic Power specifies 0.1nF ceramic capacitor placed as close as possible to pins 3 (VS−) and 5 (VS+), plus a bulk 10μF tantalum or ceramic capacitor within 5mm. This dual-tier decoupling suppresses high-frequency noise and prevents supply transients during 45V/μs slewing events.
MP5121DJ-LF-P Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- SOT-23-5 Thin, TSOT-23-5
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Amplifier Type:
- General Purpose
- Number of Circuits:
- 1
- Output Type:
- Rail-to-Rail
- Slew Rate:
- 45V/µs
- Gain Bandwidth Product:
- 14 MHz
- -3db Bandwidth:
- 20 MHz
- Current - Input Bias:
- 500 nA
- Voltage - Input Offset:
- 2 mV
- Current - Supply:
- 1.6mA
- Current - Output / Channel:
- 70 mA
- Voltage - Supply Span (Min):
- 3.2 V
- Voltage - Supply Span (Max):
- 20 V
- Operating Temperature:
- -40°C ~ 85°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TSOT-23-5
MP5121DJ-LF-P FAQ
1.How can I place an order for MP5121DJ-LF-P through Aetrix?
Please submit a Request for Quotation (RFQ) for MP5121DJ-LF-P on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MP5121DJ-LF-P reliable?
The price and inventory of MP5121DJ-LF-P are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MP5121DJ-LF-P is usually 5 days.
3.What payment methods are accepted for MP5121DJ-LF-P?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MP5121DJ-LF-P transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MP5121DJ-LF-P?
MP5121DJ-LF-P orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MP5121DJ-LF-P order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MP5121DJ-LF-P?
For technical support, including MP5121DJ-LF-P datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MP5121DJ-LF-P requirements.
6.How does Aetrix verify that MP5121DJ-LF-P is sourced from the original manufacturer or authorized distributors?
All MP5121DJ-LF-P products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MP5121DJ-LF-P meets industry standards.
7.What is the process for return or replacement of MP5121DJ-LF-P?
All MP5121DJ-LF-P units undergo pre-shipment inspection (PSI). If there is an issue with MP5121DJ-LF-P, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MP5121DJ-LF-P part is unused and in its original packaging.
Return procedure for MP5121DJ-LF-P:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MP5121DJ-LF-P Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
