My Inquiry
My Account
Monolithic Power Systems Inc. MPQ2013AGG-33-AEC1-Z
- Part No.:
- MPQ2013AGG-33-AEC1-Z
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- 6-VDFN Exposed Pad
- Datasheet:
-
MPQ2013AGG-33-AEC1-Z.pdf
- Description:
- IC REG LINEAR 3.3V 150MA 6QFN
- Quantity:
- Payment:
- Shipping:
Inventory:1,805
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPQ2013AGG-33-AEC1-Z from Monolithic Power Systems is a 40V-input, 3.3V fixed-output linear regulator in QFN-6 (2mm×2mm) package, AEC-Q100 Grade 1 qualified for automotive use. It delivers up to 150mA output current with 3.3µA quiescent current, 620mV dropout at full load, ±4% output voltage accuracy, and operates from −40°C to +150°C junction temperature - enabling power supply for automotive body control modules and low-power microcontrollers.
For engineers reviewing the MPQ2013AGG-33-AEC1-Z datasheet, MPQ2013AGG-33-AEC1-Z pinout, MPQ2013AGG-33-AEC1-Z application, or MPQ2013AGG-33-AEC1-Z equivalent, key selection criteria include its AEC-Q100 qualification, ultra-low IQ, wide 2.5V–40V input range, thermal shutdown protection, and compatibility with low-ESR ceramic capacitors ≥0.47μF.
Technical Context
The MPQ2013AGG-33-AEC1-Z uses a PMOS pass transistor architecture enabling low dropout and reverse-voltage robustness when paired with external input diode protection. Its internal feedback reference is trimmed to 1.215V, and the fixed 3.3V output version integrates an internal resistor divider (R1_IN = 1.716 MΩ, R2_IN = 1 MΩ), eliminating external FB components.
Control logic includes EN pin with 1.26V falling threshold and 1.48V rising threshold, enabling precise UVLO configuration via external resistor divider. Thermal shutdown activates at 150°C with 20°C hysteresis, and current limiting trips at 160–400mA depending on VIN and output configuration.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports direct connection to 12V/24V automotive batteries including cold-crank transients. |
| Output Voltage | Fixed 3.3V ±4% - meets standard logic rail tolerance for MCU, CAN transceivers, and sensors. |
| Quiescent Current | 3.3µA typical - enables >10-year battery life in always-on automotive modules (e.g., door ECU standby). |
| Dropout Voltage | 620mV at 150mA - sustains regulation down to VIN = 3.92V, critical during engine cranking. |
| Output Current | 150mA continuous - sufficient for powering ARM Cortex-M0+ MCUs, LIN transceivers, and EEPROMs. |
| Junction Temp Range | −40°C to +150°C - validated for under-hood placement per AEC-Q100 Grade 1 requirements. |
| Package | QFN-6 (2mm×2mm, 0.65mm pitch) - compact footprint with exposed thermal pad for PCB heat dissipation. |
Pinout & Package
MPQ2013AGG-33-AEC1-Z is housed in a thermally enhanced QFN-6 (2mm×2mm) package with exposed thermal pad. The pad must be soldered to a dedicated ground plane for thermal performance and electrical stability.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Main power input | Accepts 2.5V–40V supply; requires ≥1µF X5R/X7R ceramic capacitor close to pin for stability. |
| 2 (EN) | Enable control input | Active-high logic; 1.26V falling threshold allows external UVLO setting; tie to IN for automatic startup. |
| 3 / Exposed Pad (GND) | Power and signal ground | Must connect both pin and exposed pad to same low-impedance ground plane for thermal conduction and noise immunity. |
| 4 (FB) | Feedback reference node | Internally connected to fixed 3.3V divider; may be left floating - no external resistors required. |
| 5 (OUT) | Regulated output | Delivers 3.3V ±4%; stable with ≥0.47μF ceramic capacitor; feed-forward cap (22nF) optional for ADC noise reduction. |
| 6 (NC) | No connection | Not internally bonded; may be left open or tied to GND to improve thermal performance. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 1 qualification | Validated for automotive applications with operating ambient up to +125°C and junction up to +150°C. |
| Ultra-low quiescent current | 3.3µA typical - reduces parasitic drain in always-on systems such as telematics and alarm controllers. |
| Stable with small ceramic output caps | Supports ≥0.47μF X5R/X7R - eliminates need for bulky tantalum or aluminum electrolytics in space-constrained modules. |
| Integrated thermal shutdown & current limit | 150°C trip with 20°C hysteresis and 160–400mA foldback - protects against short-circuit and overtemperature without external circuitry. |
| Wide input voltage range | 2.5V–40V operation - accommodates 12V/24V battery systems, load dump (up to 42V abs max), and start-stop functionality. |
Applications
| Automotive Body Control Module (BCM) | Automotive Door Module |
|---|---|
Use Scenario: Powering microcontroller, LIN transceiver, and window motor driver IC in centralized door electronics. IC Role / Device Role / Timing Role: Primary 3.3V LDO supplying core logic and communication peripherals. Use Value: AEC-Q100 qualification ensures reliability across temperature cycling and vibration; 3.3µA IQ extends battery life during vehicle sleep mode. | Use Scenario: Supplying power to mirror position memory IC, anti-pinch sensor interface, and LED status indicators. IC Role / Device Role / Timing Role: Local 3.3V regulator with integrated thermal protection for fault-tolerant operation. Use Value: 620mV dropout maintains regulation during 9V battery brownout; QFN-6 footprint saves PCB area in tight door cavity layouts. |
| Automotive Telematics Control Unit (TCU) | Automotive Instrument Cluster |
Use Scenario: Providing clean 3.3V rail to GPS/GNSS receiver, cellular modem baseband processor, and secure element. IC Role / Device Role / Timing Role: Always-on LDO supporting real-time location and emergency call (eCall) functionality. Use Value: 150mA output supports burst-mode modem transmission; ±4% accuracy ensures stable ADC reference for battery monitoring. | Use Scenario: Powering digital display controller, CAN interface, and backlight dimming IC in analog/digital instrument clusters. IC Role / Device Role / Timing Role: Secondary LDO delivering regulated 3.3V to safety-critical display subsystems. Use Value: −40°C to +150°C operation supports under-dash mounting; low noise enables clean analog sensing for speedometer and fuel gauge. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar linear regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MPQ2013AGQ-33-AEC1-Z | QFN-8 (3mm×3mm) package; ±2% output accuracy; higher thermal dissipation (2.08W vs. 1.25W). | Better suited for higher ambient temperatures or sustained 150mA loads where board-level heat spreading is limited. | Select when thermal margin is constrained and PCB space permits larger footprint. |
| TLD5098ELXUMA1 | Infineon automotive LDO; 3.3V fixed, 250mA, 45µA IQ, integrated watchdog timer and diagnostic pins. | Includes functional safety features (ASIL-B ready) and diagnostics - required for ASIL-compliant subsystems. | Select when system-level ISO 26262 compliance or built-in fault reporting is mandatory. |
Compared with MPQ2013AGQ-33-AEC1-Z, this QFN-6 variant trades accuracy and thermal headroom for smaller size; compared with TLD5098ELXUMA1, it lacks safety diagnostics but delivers 14× lower quiescent current for extended battery standby.
Availability
MPQ2013AGG-33-AEC1-Z is available at Aetrix Electronics and suitable for automotive body electronics, telematics units, and instrument cluster designs requiring stable component supply with AEC-Q100 assurance and long-term production continuity.
Supply support for MPQ2013AGG-33-AEC1-Z includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with design centers across Asia and North America.
The MPQ2013A product line targets automotive and industrial applications demanding ultra-low IQ, wide input range, and AEC-Q100 reliability - specifically engineered for battery-powered and harsh-environment power management.
FAQ
What is the maximum allowable input voltage for MPQ2013AGG-33-AEC1-Z?
The absolute maximum input voltage is +42V, but recommended operating range is 2.5V to 40V. Sustained operation above 40V risks permanent damage. Transient spikes up to 42V (e.g., ISO 7637-2 Pulse 5a load dump) are tolerated briefly if external clamping or series diode protection is implemented.
Can MPQ2013AGG-33-AEC1-Z be used without an external output capacitor?
No. A minimum 0.47μF X5R or X7R ceramic capacitor is required between OUT and GND for stability. Omitting it causes oscillation and regulation failure. For improved transient response, 1μF–4.7μF is recommended, placed within 2mm of the OUT pin.
How does the EN pin behave during power-up and brownout conditions?
The EN pin has 1.26V falling threshold and 1.48V rising threshold with 200mV hysteresis. When VIN rises, EN activates at ~1.48V; during brownout, it disables at ~1.26V. This prevents chatter near threshold. Tie EN directly to VIN for automatic enable, or use a resistor divider to set custom UVLO.
Is the exposed thermal pad electrically isolated or connected to GND?
The exposed pad is internally connected to the GND pin and must be soldered to a PCB ground plane. It is not electrically isolated. Proper thermal pad connection reduces θJA by ~30°C/W and is mandatory for meeting thermal shutdown limits at 150mA load.
Does MPQ2013AGG-33-AEC1-Z support adjustable output voltage?
No. This part number is the fixed 3.3V output variant. Adjustable versions (e.g., MPQ2013AGG-AEC1-Z) require external FB resistors and have different top marking (CD vs. CP). The internal FB divider is permanently configured for 3.3V; connecting external resistors will cause inaccurate regulation.
What is the typical startup time from EN assertion to regulated output?
Startup time is 1.8ms typical when delivering 10mA into a 3.3V output with 6.8μF output capacitance. Time scales with COUT value and load current - heavier loads or larger capacitors increase settling time. No soft-start circuitry is included; output ramps linearly with internal reference stabilization.
How is reverse voltage protection handled in this device?
The MPQ2013AGG-33-AEC1-Z contains a PMOS pass transistor with an inherent body diode conducting from OUT to IN. If VOUT > VIN (e.g., backup battery scenario), uncontrolled reverse current flows. An external Schottky diode in series with IN is required to block reverse conduction and prevent device damage.
MPQ2013AGG-33-AEC1-Z Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- 6-VDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 3.3V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 1.1V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 50 µA
- Current - Supply (Max):
- -
- PSRR:
- 58dB ~ 41dB (100Hz ~ 1kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-QFN (2x2)
MPQ2013AGG-33-AEC1-Z FAQ
1.How can I place an order for MPQ2013AGG-33-AEC1-Z through Aetrix?
Please submit a Request for Quotation (RFQ) for MPQ2013AGG-33-AEC1-Z on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPQ2013AGG-33-AEC1-Z reliable?
The price and inventory of MPQ2013AGG-33-AEC1-Z are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPQ2013AGG-33-AEC1-Z is usually 5 days.
3.What payment methods are accepted for MPQ2013AGG-33-AEC1-Z?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPQ2013AGG-33-AEC1-Z transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPQ2013AGG-33-AEC1-Z?
MPQ2013AGG-33-AEC1-Z orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPQ2013AGG-33-AEC1-Z order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPQ2013AGG-33-AEC1-Z?
For technical support, including MPQ2013AGG-33-AEC1-Z datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPQ2013AGG-33-AEC1-Z requirements.
6.How does Aetrix verify that MPQ2013AGG-33-AEC1-Z is sourced from the original manufacturer or authorized distributors?
All MPQ2013AGG-33-AEC1-Z products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPQ2013AGG-33-AEC1-Z meets industry standards.
7.What is the process for return or replacement of MPQ2013AGG-33-AEC1-Z?
All MPQ2013AGG-33-AEC1-Z units undergo pre-shipment inspection (PSI). If there is an issue with MPQ2013AGG-33-AEC1-Z, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPQ2013AGG-33-AEC1-Z part is unused and in its original packaging.
Return procedure for MPQ2013AGG-33-AEC1-Z:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPQ2013AGG-33-AEC1-Z Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
