My Inquiry
My Account
Monolithic Power Systems Inc. MPQ2013AGG-5-AEC1-P
- Part No.:
- MPQ2013AGG-5-AEC1-P
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- 6-VDFN Exposed Pad
- Datasheet:
-
MPQ2013AGG-5-AEC1-P.pdf
- Description:
- IC REG LINEAR 5V 150MA 6QFN
- Quantity:
- Payment:
- Shipping:
Inventory:313
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPQ2013AGG-5-AEC1-P from Monolithic Power Systems is a 40V-input, 150mA AEC-Q100 Grade 1 qualified low-quiescent-current linear regulator in QFN-6 (2mm×2mm) package, delivering fixed 5.0V output with ±4% accuracy at 150mA load and 600–1100mV dropout. It features 3.3µA quiescent current, thermal shutdown, and internal current limiting-designed for automotive body control modules requiring stable 5V supply under wide battery voltage transients.
For engineers reviewing the MPQ2013AGG-5-AEC1-P datasheet, MPQ2013AGG-5-AEC1-P pinout, MPQ2013AGG-5-AEC1-P application, or MPQ2013AGG-5-AEC1-P equivalent, this page delivers verified package mapping, validated AEC-Q100 Grade 1 compliance, confirmed 5V fixed-output behavior, and real-world thermal performance data across -40°C to +150°C junction range.
Technical Context
The MPQ2013AGG-5-AEC1-P uses a PMOS pass transistor architecture enabling ultra-low quiescent current (3.3µA typ.) while maintaining operation across 2.5V–40V input range. Its feedback loop references a precision 1.215V internal bandgap, with output accuracy specified at ±4% for QFN-6 packages.
Thermal protection activates at 150°C junction temperature with 20°C hysteresis, and current limiting triggers at 160–400mA depending on VIN and VOUT conditions. The device enters shutdown below 1.1V EN threshold, drawing only 3–9µA supply current.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports 12V/24V automotive battery systems including cold-crank (6.5V) and load-dump (40V) events. |
| Output Voltage | Fixed 5.0V ±4% - calibrated for QFN-6 package; enables direct replacement of legacy 5V LDOs without external resistors. |
| Quiescent Current | 3.3µA typical - ensures <10µW standby power loss at 3V input, critical for always-on automotive modules. |
| Dropout Voltage | 600–1100mV at 150mA - allows regulation down to VIN = 5.6V, supporting operation during deep battery sag. |
| Output Current Limit | 160–400mA - provides robust short-circuit protection while sustaining 150mA continuous load with margin. |
| Junction Temperature | -40°C to +150°C - meets AEC-Q100 Grade 1 requirements for under-hood automotive placement. |
| PSRR @ 100Hz | 58dB - suppresses alternator ripple and switching noise upstream of sensitive analog circuitry. |
Pinout & Package
MPQ2013AGG-5-AEC1-P is housed in a thermally enhanced QFN-6 (2mm × 2mm, 0.65mm pitch) package with exposed thermal pad. The pad must be soldered to a PCB ground plane for effective heat dissipation and EMI reduction.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Input voltage supply | Accepts 2.5V–40V unregulated input; requires ≥1µF X5R/X7R ceramic capacitor directly at pin for stability. |
| 2 (EN) | Enable control input | Logic-high (>1.48V) enables regulation; logic-low (<1.26V) shuts down IC, reducing supply current to <9µA. |
| 3 & 4 (GND) | Ground reference and thermal path | Both pin 3 and exposed pad (pin 4) must connect to same low-impedance ground plane for thermal and electrical integrity. |
| 5 (FB) | Feedback reference node | Internally connected to 5V output divider; left floating for fixed-output operation; not used externally in this variant. |
| 6 (OUT) | Regulated output | Delivers 5.0V ±4% at up to 150mA; stable with ≥0.47µF ceramic output capacitor; no ESR requirement. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 1 qualification | Validated for automotive applications operating from -40°C to +125°C ambient (TJ ≤ +150°C), including vibration, humidity, and thermal cycling tests. |
| Ultra-low quiescent current | 3.3µA typical enables >10-year battery life in always-on vehicle modules such as door lock controllers or CAN wake-up receivers. |
| Wide input voltage range | 2.5V–40V accommodates 12V and 24V battery architectures, surviving ISO 7637-2 pulse 5a (load dump up to 40V) without external clamping. |
| Thermal shutdown with hysteresis | Triggers at 150°C with 20°C recovery gap, preventing thermal runaway during sustained overload or poor PCB heatsinking. |
| Stable with low-ESR ceramics | Requires only ≥0.47µF X5R/X7R output capacitor - eliminates need for costly tantalum or polymer capacitors in space-constrained designs. |
Applications
| Automotive Body Control Module (BCM) | Automotive Infotainment Power Rail |
|---|---|
|
Use Scenario: Powering microcontroller, CAN transceiver, and sensor interface in door module with 12V battery input subject to cold-crank and load-dump transients. IC Role / Device Role / Timing Role: Primary 5V LDO supplying core logic and communication peripherals; operates continuously during vehicle sleep mode. Use Value: 3.3µA quiescent current minimizes parasitic drain; 40V max input withstands 35V load-dump spikes without external TVS; ±4% output accuracy ensures reliable MCU reset behavior. |
Use Scenario: Providing clean 5V bias to audio codec, display driver, and USB PHY in head unit powered by vehicle battery. IC Role / Device Role / Timing Role: Secondary regulated rail decoupled from noisy main DC/DC converter; PSRR >58dB at 100Hz suppresses alternator ripple. Use Value: Low-noise operation prevents audible artifacts in analog audio paths; thermal shutdown protects against enclosure overheating during summer parking. |
| Industrial Telematics Gateway | Medical Portable Diagnostic Device |
|
Use Scenario: Supplying 5V to LTE modem, GNSS receiver, and secure element in fleet-tracking hardware mounted in engine bay. IC Role / Device Role / Timing Role: High-reliability LDO meeting automotive-grade temperature and lifetime requirements for remote monitoring systems. Use Value: AEC-Q100 Grade 1 certification ensures long-term reliability under thermal stress; QFN-6 footprint saves board space in compact gateway enclosures. |
Use Scenario: Powering low-power ARM Cortex-M microcontroller and analog front-end in handheld ultrasound probe with Li-ion battery input. IC Role / Device Role / Timing Role: Battery-efficient 5V regulator enabling multi-hour operation between charges; supports automatic shutdown via EN pin during idle periods. Use Value: 600mV dropout at 150mA extends usable battery range down to 5.6V; ±4% output tolerance maintains ADC reference stability within medical accuracy thresholds. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-quiescent-current automotive LDO applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NCP1117ST50T3G | Higher 6mA quiescent current; TO-220/SOT-223 package; no AEC-Q100 qualification; ±2% output accuracy. | Lacks automotive qualification and thermal performance; suitable only for non-safety-critical industrial use. | Select only if cost is primary constraint and AEC-Q100 compliance is unnecessary. |
| TLE42754G | AEC-Q100 Grade 1; 5V fixed output; 45µA quiescent current; SOIC-8 package; integrated watchdog and reset functions. | Includes system-level features (reset, watchdog) but consumes >13× more quiescent current than MPQ2013AGG-5-AEC1-P. | Choose when functional safety monitoring is required; avoid when ultra-low sleep current is mandatory. |
Compared with NCP1117ST50T3G and TLE42754G, MPQ2013AGG-5-AEC1-P uniquely combines AEC-Q100 Grade 1 qualification, 3.3µA quiescent current, and QFN-6 footprint-making it optimal for space- and power-constrained automotive modules where minimal parasitic drain and thermal efficiency are critical.
Availability
MPQ2013AGG-5-AEC1-P is available at Aetrix Electronics and suitable for automotive body electronics, telematics gateways, and portable medical diagnostics requiring stable component supply with full AEC-Q100 traceability and extended temperature support.
Supply support for MPQ2013AGG-5-AEC1-P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with over two decades of expertise in automotive-grade power management solutions.
The MPQ2013A product line is designed specifically for automotive and industrial applications demanding ultra-low quiescent current, wide input voltage tolerance, and AEC-Q100 qualification-targeting body electronics, infotainment, and ADAS subsystems.
FAQ
What is the maximum allowable input voltage for MPQ2013AGG-5-AEC1-P?
The absolute maximum input voltage is +42V, but the recommended operating range is 2.5V to 40V. This allows safe operation during ISO 7637-2 load-dump transients (up to 40V for 400ms), making it suitable for 12V and 24V automotive systems without external clamping diodes.
Does MPQ2013AGG-5-AEC1-P require an external feedback resistor network?
No. As a fixed 5.0V output variant in QFN-6 package, the FB pin is internally connected and must be left floating. External resistors are only required for adjustable-output versions or when modifying the output voltage of fixed variants using the internal divider topology.
How does thermal performance differ between QFN-6 and QFN-8 packages?
The QFN-6 (2mm×2mm) has θJA = 80°C/W versus 48°C/W for QFN-8 (3mm×3mm). At 150mA and 12V input, QFN-6 dissipates ~1.05W, resulting in ~84°C junction rise above ambient-requiring careful PCB copper area design. QFN-8 reduces this rise by ~40%, easing thermal constraints.
Is reverse voltage protection built-in?
No. The internal PMOS pass transistor includes a body diode that conducts from OUT to IN if VOUT > VIN. In backup-battery or dual-supply scenarios, an external Schottky diode must be added at the IN pin to prevent reverse current damage and uncontrolled discharge.
What output capacitor value is required for stability?
A minimum 0.47µF X5R or X7R ceramic capacitor is sufficient for stability. For improved load transient response and lower noise-especially in ADC or RF-sensitive applications-a 4.7µF X5R capacitor is recommended, placed directly at the OUT pin.
Can MPQ2013AGG-5-AEC1-P be used in non-automotive applications?
Yes. While AEC-Q100 qualified, its wide input range, low IQ, and thermal robustness make it equally suitable for industrial IoT sensors, battery-powered test equipment, and railway signaling systems where extended temperature operation and reliability are essential.
What is the EN pin threshold voltage and hysteresis?
The EN rising threshold is 1.32–1.64V, and falling threshold is 1.1–1.42V, yielding ~0.24V hysteresis. This prevents oscillation during slow-rising enable signals and ensures clean startup/shutdown sequencing in automotive power-tree designs.
MPQ2013AGG-5-AEC1-P Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- 6-VDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 1.1V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 10 µA
- Current - Supply (Max):
- 50 µA
- PSRR:
- 58dB ~ 55dB (100Hz ~ 100kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-QFN (2x2)
MPQ2013AGG-5-AEC1-P FAQ
1.How can I place an order for MPQ2013AGG-5-AEC1-P through Aetrix?
Please submit a Request for Quotation (RFQ) for MPQ2013AGG-5-AEC1-P on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPQ2013AGG-5-AEC1-P reliable?
The price and inventory of MPQ2013AGG-5-AEC1-P are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPQ2013AGG-5-AEC1-P is usually 5 days.
3.What payment methods are accepted for MPQ2013AGG-5-AEC1-P?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPQ2013AGG-5-AEC1-P transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPQ2013AGG-5-AEC1-P?
MPQ2013AGG-5-AEC1-P orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPQ2013AGG-5-AEC1-P order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPQ2013AGG-5-AEC1-P?
For technical support, including MPQ2013AGG-5-AEC1-P datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPQ2013AGG-5-AEC1-P requirements.
6.How does Aetrix verify that MPQ2013AGG-5-AEC1-P is sourced from the original manufacturer or authorized distributors?
All MPQ2013AGG-5-AEC1-P products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPQ2013AGG-5-AEC1-P meets industry standards.
7.What is the process for return or replacement of MPQ2013AGG-5-AEC1-P?
All MPQ2013AGG-5-AEC1-P units undergo pre-shipment inspection (PSI). If there is an issue with MPQ2013AGG-5-AEC1-P, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPQ2013AGG-5-AEC1-P part is unused and in its original packaging.
Return procedure for MPQ2013AGG-5-AEC1-P:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPQ2013AGG-5-AEC1-P Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
