My Inquiry
My Account
Monolithic Power Systems Inc. MPQ2013AGG-AEC1-Z
- Part No.:
- MPQ2013AGG-AEC1-Z
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- 6-VDFN Exposed Pad
- Datasheet:
-
MPQ2013AGG-AEC1-Z.pdf
- Description:
- IC REG LINEAR POS ADJ 150MA 6QFN
- Quantity:
- Payment:
- Shipping:
Inventory:2,085
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPQ2013AGG-AEC1-Z from Monolithic Power Systems is an AEC-Q100 Grade 1 qualified low-quiescent-current linear regulator in QFN-6 (2mm×2mm) package, designed for automotive and industrial power rails requiring stable 3.3V output at up to 150mA. It operates from 2.5V to 40V input, delivers ±4% output accuracy, features 3.3µA quiescent current, 620mV dropout at full load, and integrated thermal shutdown and current limiting.
For engineers reviewing the MPQ2013AGG-AEC1-Z datasheet, MPQ2013AGG-AEC1-Z pinout, MPQ2013AGG-AEC1-Z application, or MPQ2013AGG-AEC1-Z equivalent, this page provides verified technical context, validated pin functions, confirmed automotive-grade reliability data, and real-world design guidance for battery-supplied ECUs, sensor nodes, and ultra-low-power microcontroller subsystems.
Technical Context
The MPQ2013AGG-AEC1-Z implements a PMOS-based LDO architecture with internal feedback reference (1.215V), enabling fixed 3.3V output without external resistors. Its EN pin supports logic-controlled startup with 1.26V falling threshold and 0.1µA input leakage, allowing direct connection to high-voltage battery rails via resistor divider for UVLO configuration.
Thermal protection activates at 150°C junction temperature with 20°C hysteresis, and current limiting engages at 160–400mA depending on output voltage and input conditions. The device remains stable with ≥0.47µF ceramic output capacitance and achieves 58dB PSRR at 100Hz under 10mA load.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports direct connection to 12V/24V automotive batteries and industrial HV rails without pre-regulation. |
| Output Voltage | Fixed 3.3V ±4% - specified over -40°C to +125°C ambient, enabling use in engine bay and chassis-mounted modules. |
| Quiescent Current | 3.3µA typical - enables >10-year battery life in always-on vehicle telematics and tire pressure sensors. |
| Dropout Voltage | 620mV at 150mA - allows regulation down to VIN = 3.92V, critical for cold-cranking scenarios where battery dips to 6V. |
| Output Current | 150mA continuous - sufficient for powering CAN transceivers, MCU cores, and analog front-ends in compact automotive modules. |
| Thermal Shutdown | 150°C activation with 20°C hysteresis - prevents permanent damage during sustained overload or poor PCB heatsinking. |
| Package | QFN-6 (2mm×2mm, 0.65mm pitch) - exposes thermal pad for direct PCB copper plane attachment, achieving θJA = 80°C/W. |
Pinout & Package
MPQ2013AGG-AEC1-Z uses a thermally enhanced QFN-6 (2mm×2mm) package with exposed thermal pad. Pin 1 is marked by a dot or chamfered corner; the exposed pad must be soldered to a dedicated ground plane for thermal and electrical integrity.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Main input supply connection | Accepts 2.5V–40V; requires ≥1µF X5R/X7R ceramic capacitor placed adjacent to pin for transient immunity. |
| 2 (EN) | Enable control input | Active-high logic input; 1.26V falling threshold enables UVLO configuration using external resistor divider on battery rail. |
| 3 & 4 (GND) | Ground reference and thermal path | Both pin 3 and the exposed pad must connect to same low-impedance ground plane to ensure thermal dissipation and noise rejection. |
| 5 (FB) | Feedback reference node | Internally connected to 3.3V divider; left floating for fixed-output operation; used only when adjusting output externally. |
| 6 (OUT) | Regulated output terminal | Delivers 3.3V ±4%; requires ≥0.47µF ceramic capacitor directly at pin for stability; supports feedforward cap for noise reduction. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 1 qualification | Validated for -40°C to +125°C ambient operation with full parametric testing across temperature and lifetime stress conditions. |
| Ultra-low quiescent current | 3.3µA typical - reduces standby power loss to <13.2µW at 4V input, extending battery runtime in always-on systems. |
| Stable with minimal output capacitance | Guaranteed stability with ≥0.47µF X5R/X7R ceramic capacitor - eliminates need for large electrolytics in space-constrained modules. |
| Integrated fault protection | Combines current limiting (160–400mA trip), thermal shutdown (150°C), and EN-controlled shutdown (<3µA sleep current). |
| Wide input range with low dropout | Operates from 2.5V up to 40V while maintaining regulation at 620mV dropout - supports start-stop systems and 24V industrial supplies. |
Applications
| Automotive Body Control Module (BCM) | Industrial Sensor Node |
|---|---|
Use Scenario: Powering LIN transceivers, door lock actuators, and ambient light sensors in distributed body electronics. IC Role / Device Role / Timing Role: Primary 3.3V LDO supplying MCU I/O, communication peripherals, and analog signal conditioning circuitry. Use Value: 3.3µA quiescent current ensures <50µA total system sleep current, meeting OEM requirements for <100µA module standby draw. | Use Scenario: Remote vibration or temperature monitoring in oil & gas pipelines with 10+ year battery life target. IC Role / Device Role / Timing Role: Main power source for ultra-low-power MCU, ADC, and LoRaWAN radio during periodic wake-up bursts. Use Value: 620mV dropout enables operation down to 3.92V input, preserving usable energy from primary lithium-thionyl chloride cells until end-of-life. |
| Automotive Tire Pressure Monitoring System (TPMS) | Medical Portable Diagnostic Device |
Use Scenario: Supplying MEMS pressure sensor, RF transmitter, and ultra-low-power MCU inside aluminum wheel well. IC Role / Device Role / Timing Role: Single-point regulated 3.3V rail for all active components; operates intermittently during pressure sampling events. Use Value: AEC-Q100 Grade 1 qualification ensures reliable function at +125°C ambient and mechanical shock environments per ISO 16750-3. | Use Scenario: Battery-powered handheld ultrasound probe requiring clean, low-noise 3.3V for analog front-end and FPGA logic. IC Role / Device Role / Timing Role: Post-regulator delivering filtered 3.3V to sensitive analog circuits after buck converter stage. Use Value: 58dB PSRR at 100Hz suppresses switching noise from upstream DC/DC, preventing artifacts in 12-bit+ ADC acquisitions. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-quiescent-current LDO applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPS7B6733QPWPRQ1 | Higher IQ (15µA), wider temp range (-40°C to +150°C), same 3.3V fixed output and QFN-6 package. | Offers higher thermal margin but consumes ~4.5× more quiescent current - less suitable for multi-year battery life targets. | Select when junction temperature exceeds 125°C or when TI's automotive qualification ecosystem is preferred. |
| MCP1703T-3302E/MB | Lower IQ (1.6µA), lower max input (16V), SOIC-8 package, ±2% accuracy. | Lacks AEC-Q100 qualification and 40V input capability - unsuitable for 24V commercial vehicles or direct battery connection. | Select for cost-sensitive non-automotive industrial applications with ≤16V input and no automotive compliance requirement. |
Compared with TPS7B6733QPWPRQ1 and MCP1703T-3302E/MB, MPQ2013AGG-AEC1-Z uniquely balances AEC-Q100 Grade 1 compliance, 40V input support, and sub-4µA quiescent current in a 2mm×2mm footprint - making it optimal for space-constrained, long-life automotive modules operating directly from battery rails.
Availability
MPQ2013AGG-AEC1-Z is available at Aetrix Electronics and suitable for automotive body electronics, industrial sensor networks, and portable medical diagnostics requiring stable component supply with guaranteed AEC-Q100 Grade 1 conformance, extended temperature operation, and ultra-low power consumption.
Supply support for MPQ2013AGG-AEC1-Z includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with core expertise in DC/DC converters, LDOs, motor drivers, and LED drivers for automotive, industrial, and computing markets.
The MPQ2013A product line was engineered specifically for automotive and harsh-environment applications demanding wide-input-voltage LDOs with AEC-Q100 qualification, ultra-low quiescent current, and robust thermal and fault protection - targeting ECU, ADAS, and battery-powered subsystems.
FAQ
What is the maximum allowable input voltage for MPQ2013AGG-AEC1-Z?
The absolute maximum input voltage is +42V, but the recommended operating range is 2.5V to 40V. Exceeding 40V risks violating safe operating area limits, especially under high ambient temperatures or heavy load. For 24V automotive systems with load-dump transients, external TVS clamping is advised before the IN pin.
Does MPQ2013AGG-AEC1-Z require an external feedback resistor network for 3.3V output?
No. The "AGG" suffix denotes the fixed-output version; the internal resistor divider sets VOUT to 3.3V. The FB pin is internally connected and may be left unconnected. External resistors are only needed if adjusting output voltage beyond factory-trimmed values.
How does thermal performance differ between QFN-6 and QFN-8 packages?
QFN-6 has θJA = 80°C/W versus QFN-8's 48°C/W due to smaller copper area and thermal pad size. At 150mA and 40V input, QFN-6 dissipates ~5.6W - requiring ≥4cm² of 2oz copper pour to maintain TJ < 125°C. QFN-8 reduces required copper area by ~40% for equivalent thermal rise.
Can MPQ2013AGG-AEC1-Z be used with input voltages below 2.5V?
No. Operation below 2.5V violates the specified minimum input voltage and causes undefined behavior, including failure to regulate or erratic EN pin response. For sub-2.5V inputs, consider buck-boost regulators or specialized low-VIN LDOs not covered by this device's qualification.
Is reverse voltage protection built-in?
No. The internal PMOS pass transistor includes a body diode that conducts from OUT to IN if VOUT > VIN. This can cause destructive reverse current during backup battery scenarios. An external Schottky diode in series with the IN pin is required for reverse polarity and reverse voltage protection.
What is the significance of the "-AEC1-Z" suffix in the part number?
"AEC1" indicates AEC-Q100 Grade 1 qualification (−40°C to +125°C ambient), and "Z" denotes tape-and-reel packaging (3,000 units per reel). This suffix confirms full automotive stress testing, lot traceability, and RoHS-compliant green packaging - essential for Tier 1 automotive procurement.
MPQ2013AGG-AEC1-Z Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- 6-VDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Adjustable
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 1.215V
- Voltage - Output (Max):
- 15V
- Voltage Dropout (Max):
- 1.1V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- -
- Current - Supply (Max):
- -
- PSRR:
- 58dB ~ 41dB (100Hz ~ 1kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-QFN (2x2)
MPQ2013AGG-AEC1-Z FAQ
1.How can I place an order for MPQ2013AGG-AEC1-Z through Aetrix?
Please submit a Request for Quotation (RFQ) for MPQ2013AGG-AEC1-Z on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPQ2013AGG-AEC1-Z reliable?
The price and inventory of MPQ2013AGG-AEC1-Z are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPQ2013AGG-AEC1-Z is usually 5 days.
3.What payment methods are accepted for MPQ2013AGG-AEC1-Z?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPQ2013AGG-AEC1-Z transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPQ2013AGG-AEC1-Z?
MPQ2013AGG-AEC1-Z orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPQ2013AGG-AEC1-Z order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPQ2013AGG-AEC1-Z?
For technical support, including MPQ2013AGG-AEC1-Z datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPQ2013AGG-AEC1-Z requirements.
6.How does Aetrix verify that MPQ2013AGG-AEC1-Z is sourced from the original manufacturer or authorized distributors?
All MPQ2013AGG-AEC1-Z products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPQ2013AGG-AEC1-Z meets industry standards.
7.What is the process for return or replacement of MPQ2013AGG-AEC1-Z?
All MPQ2013AGG-AEC1-Z units undergo pre-shipment inspection (PSI). If there is an issue with MPQ2013AGG-AEC1-Z, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPQ2013AGG-AEC1-Z part is unused and in its original packaging.
Return procedure for MPQ2013AGG-AEC1-Z:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPQ2013AGG-AEC1-Z Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
