My Inquiry
My Account
Monolithic Power Systems Inc. MPQ2013AGJE-25-C672-P
- Part No.:
- MPQ2013AGJE-25-C672-P
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- SOT-23-4 Thin, TSOT-23-4
- Datasheet:
-
MPQ2013AGJE-25-C672-P.pdf
- Description:
- IC REG LIN 2.5V 150MA TSOT23-4
- Quantity:
- Payment:
- Shipping:
Inventory:4,024
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPQ2013AGJE-25-C672-P from Monolithic Power Systems is a 40V-input, 150mA AEC-Q100 Grade 1 qualified linear regulator with fixed 2.5V output, 3.3µA quiescent current, 600–1100mV dropout at 150mA, and QFN-6 (2mm×2mm) package. It powers ultra-low-power microcontrollers in automotive body electronics and battery-backed industrial sensors where input voltage may reach 40V and standby current must remain sub-5µA.
For engineers reviewing the MPQ2013AGJE-25-C672-P datasheet, MPQ2013AGJE-25-C672-P pinout, MPQ2013AGJE-25-C672-P application, or MPQ2013AGJE-25-C672-P equivalent, this device delivers verified ±4% output accuracy at 2.5V, thermal shutdown at 150°C, EN-controlled startup, and stable operation with ≥0.47µF ceramic output capacitance - critical for automotive ECU power rail integrity and long-life battery systems.
Technical Context
The MPQ2013AGJE-25-C672-P implements a PMOS pass transistor architecture enabling low dropout and reverse-voltage resilience via external diode protection. Its internal 1.215V reference feeds an error amplifier that regulates output by adjusting gate drive to maintain VFB = 1.215V across the internal resistor divider (R1IN = 1.058MΩ, R2IN = 1MΩ), yielding nominal 2.5V output.
Operation is enabled via EN pin with 1.26V falling threshold and 1.48V rising threshold; shutdown reduces supply current to ≤9µA. Protection includes foldback current limiting (160–400mA trip range) and thermal shutdown with 20°C hysteresis, ensuring robustness in under-hood automotive environments up to +125°C ambient.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports direct connection to 12V/24V/36V automotive batteries and industrial HV rails without pre-regulation. |
| Output Voltage | Fixed 2.5V ±4% - calibrated for precision analog sensor biasing and MCU I/O domain regulation in AEC-Q100 systems. |
| Quiescent Current | 3.3µA typical - enables >10-year battery life in always-on telematics modules with 200mAh coin cells. |
| Dropout Voltage | 600–1100mV at 150mA - sustains regulation down to VIN = 3.1V, critical for cold-crank automotive operation. |
| Thermal Shutdown | 150°C junction activation - protects against solder reflow damage and sustained overloads in sealed enclosures. |
| Package | QFN-6 (2mm×2mm, 0.65mm pitch) - compact footprint with exposed thermal pad for PCB-level heat dissipation up to 1.25W. |
| Operating Temp | −40°C to +125°C ambient - validated for engine bay, transmission control, and ADAS camera modules. |
Pinout & Package
MPQ2013AGJE-25-C672-P uses the QFN-6 (2mm×2mm) thermally enhanced package with exposed pad. The pinout is validated per MPS MPQ2013A Rev. 1.1 datasheet page 12 and supports high-reliability automotive mounting with solder joint inspection capability.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Main input supply terminal | Accepts 2.5–40V; requires ≥1µF X5R/X7R ceramic capacitor directly adjacent for transient immunity. |
| 2 (EN) | Enable control input | Logic HIGH (>1.48V) enables regulation; LOW (<1.26V) disables output and reduces IQ to ≤9µA. |
| 3 & Exposed Pad (GND) | Power and signal ground | Must connect both pin and exposed pad to same low-impedance ground plane for thermal conduction and noise rejection. |
| 4 (FB) | Feedback reference node | Internally biased to 1.215V; left floating for fixed 2.5V operation; used with external divider for adjustable outputs. |
| 5 (OUT) | Regulated output | Delivers up to 150mA; stable with ≥0.47µF ceramic output cap; no ESR requirements. |
| 6 (NC) | No-connect terminal | May be left open or tied to GND to improve thermal performance; no electrical function. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 1 qualification | Validated for −40°C to +125°C ambient operation with full temperature cycling, HTOL, and ESD testing per automotive reliability standards. |
| Ultra-low quiescent current | 3.3µA typical enables >10-year shelf life in battery-powered vehicle trackers and tire pressure sensors. |
| Stable with low-ESR ceramics | Guaranteed stability with ≥0.47µF X5R/X7R capacitors eliminates need for costly tantalum or polymer caps. |
| Integrated fault protection | Current limiting (160–400mA), thermal shutdown (150°C), and EN-controlled sequencing prevent system latch-up during load faults. |
| Wide input range | 2.5–40V operation accommodates 12V/24V/36V battery systems, load-dump transients, and industrial DC rails without external TVS. |
Applications
| Automotive Body Control Module (BCM) | Industrial Battery-Backed Sensor Node |
|---|---|
Use Scenario: Powering LIN transceivers and door-lock actuators in 12V vehicle architectures with cold-crank voltage dips to 3.2V. IC Role / Device Role / Timing Role: Primary 2.5V LDO supplying MCU core logic and analog front-end circuitry. Use Value: 600mV dropout ensures uninterrupted operation during cranking; ±4% accuracy maintains ADC reference integrity across temperature. | Use Scenario: Long-life remote monitoring of pipeline pressure using AA-cell-powered wireless nodes deployed for 15+ years. IC Role / Device Role / Timing Role: Standby power regulator for ultra-low-power MCU and RF SoC during sleep mode. Use Value: 3.3µA IQ extends battery life beyond 12 years; QFN-6 footprint minimizes PCB area in constrained enclosures. |
| Medical Portable Diagnostic Device | ADAS Camera Power Rail |
Use Scenario: Regulating 2.5V for CMOS image sensor bias and analog signal chain in handheld ultrasound units. IC Role / Device Role / Timing Role: Precision low-noise voltage source for analog front-end components. Use Value: Low 58dB PSRR at 100Hz suppresses switching noise from nearby DC/DC converters; AEC-Q100 qualification ensures manufacturing traceability. | Use Scenario: Providing clean 2.5V supply to image signal processor (ISP) in automotive surround-view cameras operating near engine compartments. IC Role / Device Role / Timing Role: Secondary LDO post-regulator after primary 5V buck converter. Use Value: −40°C to +125°C ambient rating matches under-hood thermal profile; thermal shutdown prevents thermal runaway during prolonged exposure. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar linear regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MPQ2013AGQ-25 | QFN-8 (3mm×3mm) package; ±2% output accuracy; higher thermal dissipation (2.08W). | Suitable for higher-power or thermally constrained layouts requiring better θJA (48°C/W vs. 80°C/W). | Select when board layout allows larger footprint and tighter output tolerance is required for precision analog circuits. |
| NCP1117ST2.5T3G | TO-220/SOT-223; 1A output; 1.2V dropout at 800mA; no AEC-Q100 qualification; 6mA IQ. | Used in non-automotive industrial controls where cost and thermal mass outweigh size and qualification needs. | Choose only for non-automotive applications lacking AEC-Q100 requirements and where 6mA IQ is acceptable. |
Compared with MPQ2013AGQ-25, the MPQ2013AGJE-25-C672-P trades ±2% accuracy and 2.08W power handling for 30% smaller footprint and AEC-Q100-compliant traceability; versus NCP1117ST2.5T3G, it delivers 60× lower quiescent current and automotive-grade reliability at the cost of reduced output current headroom.
Availability
MPQ2013AGJE-25-C672-P is available at Aetrix Electronics and suitable for automotive body electronics, industrial battery-backed sensors, portable medical diagnostics, and ADAS camera modules requiring stable component supply with full AEC-Q100 documentation and lot-level traceability.
Supply support for MPQ2013AGJE-25-C672-P includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with design centers in the US, China, and Taiwan, and global manufacturing partnerships.
The MPQ2013A product line targets automotive and industrial applications requiring wide-input, ultra-low-IQ linear regulation with AEC-Q100 qualification - specifically engineered for battery-powered ECUs, sensor nodes, and safety-critical subsystems operating across extended temperature ranges.
FAQ
What is the maximum continuous output current for MPQ2013AGJE-25-C672-P?
The MPQ2013AGJE-25-C672-P is rated for 150mA continuous output current in QFN-6 package at TA ≤ +125°C. Peak current limit is 160–400mA depending on VIN and thermal conditions, but sustained operation above 150mA requires careful thermal design due to 1.25W max power dissipation and 80°C/W θJA.
Does MPQ2013AGJE-25-C672-P require an external feedback resistor network?
No. As a fixed 2.5V output variant, the FB pin is internally connected to the output divider and may be left floating. External resistors are only needed if adjusting the output voltage beyond 2.5V - which is not supported in this specific part number.
Can MPQ2013AGJE-25-C672-P operate with input voltage below 2.5V?
No. The absolute minimum input voltage is 2.5V per Absolute Maximum Ratings. Operation below this level is not guaranteed and may result in unregulated output or failure to start. For sub-2.5V inputs, consider alternative regulators such as the MPQ2012 series.
Is reverse-voltage protection integrated into MPQ2013AGJE-25-C672-P?
No. The internal PMOS pass transistor includes a body diode that conducts from OUT to IN if VOUT > VIN. To prevent destructive reverse current (e.g., during backup battery hold-up), an external Schottky diode must be placed in series with the IN pin per MPS Application Note AN-117.
What is the recommended output capacitor for stability?
MPS specifies ≥0.47µF X5R or X7R ceramic capacitor directly at the OUT pin. A 1µF–4.7µF capacitor is recommended for optimal transient response and noise suppression; larger values improve load step recovery but do not affect stability margin.
How does the EN pin behave during power-up?
The EN pin has 1.48V rising threshold and 1.26V falling threshold with hysteresis. When connected directly to IN, the regulator enables automatically once VIN exceeds 1.48V. For controlled sequencing, drive EN with a dedicated voltage rail or RC delay network to coordinate with other power domains.
Is MPQ2013AGJE-25-C672-P RoHS and REACH compliant?
Yes. All MPS parts, including MPQ2013AGJE-25-C672-P, are lead-free and fully compliant with EU RoHS Directive 2011/65/EU and REACH Regulation (EC) No. 1907/2006. Green status documentation is available on the MPS website under Products > Quality Assurance.
MPQ2013AGJE-25-C672-P Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- SOT-23-4 Thin, TSOT-23-4
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 2.5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 1.3V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 10 µA
- Current - Supply (Max):
- 50 µA
- PSRR:
- 58dB ~ 41dB (100Hz ~ 1kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TSOT-23-4
MPQ2013AGJE-25-C672-P FAQ
1.How can I place an order for MPQ2013AGJE-25-C672-P through Aetrix?
Please submit a Request for Quotation (RFQ) for MPQ2013AGJE-25-C672-P on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPQ2013AGJE-25-C672-P reliable?
The price and inventory of MPQ2013AGJE-25-C672-P are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPQ2013AGJE-25-C672-P is usually 5 days.
3.What payment methods are accepted for MPQ2013AGJE-25-C672-P?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPQ2013AGJE-25-C672-P transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPQ2013AGJE-25-C672-P?
MPQ2013AGJE-25-C672-P orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPQ2013AGJE-25-C672-P order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPQ2013AGJE-25-C672-P?
For technical support, including MPQ2013AGJE-25-C672-P datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPQ2013AGJE-25-C672-P requirements.
6.How does Aetrix verify that MPQ2013AGJE-25-C672-P is sourced from the original manufacturer or authorized distributors?
All MPQ2013AGJE-25-C672-P products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPQ2013AGJE-25-C672-P meets industry standards.
7.What is the process for return or replacement of MPQ2013AGJE-25-C672-P?
All MPQ2013AGJE-25-C672-P units undergo pre-shipment inspection (PSI). If there is an issue with MPQ2013AGJE-25-C672-P, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPQ2013AGJE-25-C672-P part is unused and in its original packaging.
Return procedure for MPQ2013AGJE-25-C672-P:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPQ2013AGJE-25-C672-P Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
