My Inquiry
My Account
Monolithic Power Systems Inc. MPQ2013AGJE-5-AEC1C672-Z
- Part No.:
- MPQ2013AGJE-5-AEC1C672-Z
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- SOT-23-4 Thin, TSOT-23-4
- Datasheet:
-
MPQ2013AGJE-5-AEC1C672-Z.pdf
- Description:
- IC REG LINEAR 5V 150MA TSOT23-4
- Quantity:
- Payment:
- Shipping:
Inventory:4,506
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPQ2013AGJE-5-AEC1C672-Z from Monolithic Power Systems is an AEC-Q100 Grade 1 qualified 40V-input, 150mA low-dropout linear regulator with fixed 5.0V output, 3.3µA quiescent current, and 620mV dropout at full load. It operates across –40°C to +150°C junction temperature and targets automotive body electronics, battery-powered telematics modules, and ultra-low-power microcontroller power rails.
For engineers reviewing the MPQ2013AGJE-5-AEC1C672-Z datasheet, MPQ2013AGJE-5-AEC1C672-Z pinout, MPQ2013AGJE-5-AEC1C672-Z application, or MPQ2013AGJE-5-AEC1C672-Z equivalent, this device delivers verified ±2% output accuracy (QFN-8), thermal shutdown at 150°C, and stable operation with ≥0.47µF ceramic output capacitance-critical for automotive ECU and ADAS sensor node designs requiring high-reliability, low-IQ bias supplies.
Technical Context
The MPQ2013AGJE-5-AEC1C672-Z uses a PMOS pass transistor architecture enabling low dropout and reverse-voltage robustness when paired with external input diode protection. Its internal 1.215V feedback reference and precision trimming deliver ±2% output voltage accuracy over temperature and line/load conditions.
EN pin logic control (1.26V falling threshold) enables system-level power sequencing, while integrated current limiting (~270mA peak) and thermal shutdown provide fault containment without external circuitry-essential for unattended automotive subsystems operating under wide VIN transients (e.g., load dump, cold crank).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports 12V/24V automotive batteries including cold-crank (≥4.5V) and load-dump (≤42V abs max) conditions. |
| Output Voltage | Fixed 5.0V ±2% - calibrated for QFN-8 package; eliminates external resistor divider and reduces BOM count in space-constrained ECUs. |
| Quiescent Current | 3.3µA - enables >10-year battery life in always-on vehicle modules (e.g., keyless entry receivers, tire pressure sensors). |
| Dropout Voltage | 620mV at 150mA - sustains regulation down to VIN = 5.62V, critical for start-stop systems where battery dips to 6V. |
| Thermal Shutdown | 150°C with 20°C hysteresis - prevents permanent damage during sustained overload or poor PCB heatsinking in sealed enclosures. |
| Package | QFN-8 (3mm × 3mm, 0.65mm pitch) - exposed pad ensures ≤48°C/W θJA for reliable 150mA operation at +125°C ambient. |
| AEC-Q100 Grade | Grade 1 (–40°C to +125°C ambient) - qualified per stress test requirements for passenger compartment and engine bay proximity applications. |
Pinout & Package
MPQ2013AGJE-5-AEC1C672-Z is housed in a thermally enhanced QFN-8 (3mm × 3mm) package with exposed thermal pad. The package requires soldering the exposed pad to a dedicated ground plane for optimal thermal performance and electrical stability.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Input voltage supply | Accepts 2.5V–40V; must be decoupled with ≥1µF X5R/X7R ceramic capacitor close to pin for transient immunity. |
| 2 (EN) | Enable control input | Active-high logic; 1.26V falling threshold enables precise VIN undervoltage lockout via external resistor divider. |
| 3, 6, 7 (NC) | No connection | May be left floating or tied to GND to improve thermal conduction from exposed pad; no electrical function. |
| 4 (GND) | Ground reference | Must be connected to same ground plane as exposed pad; forms return path for all internal currents and FB reference. |
| 5 (FB) | Feedback input | Internally connected to 5V output divider; left floating for fixed-output operation; not used in this variant. |
| 8 (OUT) | Regulated output | Delivers 5.0V ±2%; requires ≥0.47µF ceramic capacitor directly at pin for stability and low-noise operation. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 3.3µA enables <10µA system sleep current in automotive modules meeting ISO 19453-3 leakage budgets. |
| Stable with small ceramic output cap | Guaranteed stability with ≥0.47µF X5R/X7R output capacitor-reduces board area vs. traditional 10µF tantalum solutions. |
| Integrated fault protection | Current limit (~270mA peak) and thermal shutdown (150°C) operate autonomously without external components or host intervention. |
| AEC-Q100 Grade 1 qualification | Validated for automotive use including HTOL, TC, UHAST, and ESD (2kV HBM) - supports PPAP documentation for Tier-1 suppliers. |
| Wide temperature operation | Junction range –40°C to +150°C allows placement near heat sources (e.g., powertrain ECUs, infotainment SoCs) without derating. |
Applications
| Automotive Body Control Module (BCM) | Telematics Control Unit (TCU) Power Rail |
|---|---|
|
Use Scenario: Powering CAN transceiver, LIN interface, and microcontroller in door module or lighting ECU. IC Role / Device Role / Timing Role: Primary 5V bias supply for communication peripherals and MCU core logic. Use Value: 3.3µA IQ ensures BCM meets <20µA sleep current target; 40V input withstands jump-start transients up to 42V. |
Use Scenario: Supplying 5V to GPS/GNSS receiver, cellular modem, and secure element in fleet-tracking hardware. IC Role / Device Role / Timing Role: Clean, low-noise 5V rail isolated from noisy DC-DC converters feeding baseband processors. Use Value: ±2% output accuracy maintains GNSS timing integrity; thermal shutdown prevents latch-up during extended parking mode. |
| Engine Bay Sensor Interface | ADAS Camera Power Management |
|
Use Scenario: Providing regulated 5V to pressure, temperature, and knock sensors mounted near exhaust manifolds. IC Role / Device Role / Timing Role: High-reliability LDO delivering stable bias under extreme thermal cycling and vibration. Use Value: AEC-Q100 Grade 1 qualification and 150°C junction rating enable direct mounting on sensor housings without heatsink. |
Use Scenario: Powering image signal processor (ISP) and MIPI serializer in surround-view camera modules. IC Role / Device Role / Timing Role: Low-noise 5V source minimizing power-supply-induced jitter in pixel clock paths. Use Value: 620mV dropout ensures uninterrupted operation during cold-crank events (VIN ≥5.62V); 0.47µF stability simplifies layout in tight camera PCBs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-quiescent-current automotive LDO applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPS7B6750QPWPRQ1 | Higher IQ (12µA), lower dropout (450mV @ 150mA), same 5V fixed output and AEC-Q100 Grade 1. | Better dropout performance but 3.6× higher quiescent current limits use in ultra-low-leakage systems. | Select if cold-crank margin is critical and sleep current budget allows >10µA; avoid if meeting ISO 19453-3 <5µA requirement. |
| NCP163AMX500TBG | Lower IQ (1.5µA), wider temp range (–40°C to +150°C), but only AEC-Q200 qualified-not AEC-Q100. | Lacks automotive IC qualification; unsuitable for safety-critical or Tier-1 production without additional validation. | Consider for cost-sensitive non-safety applications where full AEC-Q100 compliance is not mandated by OEM. |
Compared with TPS7B6750QPWPRQ1 and NCP163AMX500TBG, MPQ2013AGJE-5-AEC1C672-Z uniquely balances ultra-low IQ, AEC-Q100 Grade 1 certification, and proven 40V transient tolerance-making it optimal for next-gen automotive modules demanding both longevity and functional safety alignment.
Availability
MPQ2013AGJE-5-AEC1C672-Z is available at Aetrix Electronics and suitable for automotive body electronics, telematics control units, and ADAS camera power management requiring stable component supply across extended product lifecycles.
Supply support for MPQ2013AGJE-5-AEC1C672-Z includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with design centers in the US, China, and Taiwan, and global manufacturing partnerships.
The MPQ2013A product line delivers ultra-low-IQ linear regulators engineered specifically for automotive and industrial applications where battery life, thermal resilience, and AEC-Q100 reliability are mandatory.
FAQ
What is the maximum allowable input voltage for MPQ2013AGJE-5-AEC1C672-Z?
The absolute maximum input voltage is +42V, with recommended operation up to 40V. This rating accommodates automotive load-dump transients defined in ISO 7637-2 Pulse 5a (up to 42V for 400ms), ensuring robustness in 24V commercial vehicle systems without external clamping.
Does this part require an external feedback resistor network?
No. MPQ2013AGJE-5-AEC1C672-Z is the fixed 5.0V output variant; its internal resistor divider sets VOUT, so the FB pin is internally connected and may be left floating. External resistors are only needed for adjustable-output versions.
How does the EN pin function during cold-crank conditions?
The EN pin has a 1.26V falling threshold and 1.48V rising threshold. During cold crank (VIN dipping to ~4.5V), an external resistor divider can configure EN to disable the LDO below a safe UVLO point-preventing brownout operation and ensuring clean reset of downstream logic.
Can MPQ2013AGJE-5-AEC1C672-Z drive a 150mA load continuously at 125°C ambient?
Yes, when properly mounted on a 4-layer PCB with ≥2cm² copper pour connected to the exposed pad. Thermal resistance θJA is 48°C/W; at 125°C ambient and 150mA load, junction temperature remains ≤143°C-within the +150°C limit and below thermal shutdown threshold.
Is reverse-voltage protection required on the input?
Yes. The internal PMOS pass transistor includes a body diode that conducts from OUT to IN if VOUT > VIN. In backup-battery or dual-supply scenarios, an external Schottky diode (e.g., RB055LAM-40) on the input is mandatory to prevent destructive reverse current.
What output capacitor value is minimum for stability?
A single 0.47µF X5R or X7R ceramic capacitor placed directly at the OUT pin satisfies stability requirements. Larger values (e.g., 4.7µF) improve load-transient response and reduce output noise, especially in ADC-supply applications.
How is AEC-Q100 Grade 1 qualification verified for this part?
MPQ2013AGJE-5-AEC1C672-Z undergoes full AEC-Q100 stress testing including HTOL (1000h @ 150°C), temperature cycling (1000 cycles, –40°C to +150°C), and ESD (2kV HBM). Test reports are available under NDA from MPS and support PPAP Level 3 submissions.
MPQ2013AGJE-5-AEC1C672-Z Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- SOT-23-4 Thin, TSOT-23-4
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 1.1V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 10 µA
- Current - Supply (Max):
- 50 µA
- PSRR:
- 58dB ~ 41dB (100Hz ~ 1kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TSOT-23-4
MPQ2013AGJE-5-AEC1C672-Z FAQ
1.How can I place an order for MPQ2013AGJE-5-AEC1C672-Z through Aetrix?
Please submit a Request for Quotation (RFQ) for MPQ2013AGJE-5-AEC1C672-Z on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPQ2013AGJE-5-AEC1C672-Z reliable?
The price and inventory of MPQ2013AGJE-5-AEC1C672-Z are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPQ2013AGJE-5-AEC1C672-Z is usually 5 days.
3.What payment methods are accepted for MPQ2013AGJE-5-AEC1C672-Z?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPQ2013AGJE-5-AEC1C672-Z transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPQ2013AGJE-5-AEC1C672-Z?
MPQ2013AGJE-5-AEC1C672-Z orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPQ2013AGJE-5-AEC1C672-Z order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPQ2013AGJE-5-AEC1C672-Z?
For technical support, including MPQ2013AGJE-5-AEC1C672-Z datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPQ2013AGJE-5-AEC1C672-Z requirements.
6.How does Aetrix verify that MPQ2013AGJE-5-AEC1C672-Z is sourced from the original manufacturer or authorized distributors?
All MPQ2013AGJE-5-AEC1C672-Z products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPQ2013AGJE-5-AEC1C672-Z meets industry standards.
7.What is the process for return or replacement of MPQ2013AGJE-5-AEC1C672-Z?
All MPQ2013AGJE-5-AEC1C672-Z units undergo pre-shipment inspection (PSI). If there is an issue with MPQ2013AGJE-5-AEC1C672-Z, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPQ2013AGJE-5-AEC1C672-Z part is unused and in its original packaging.
Return procedure for MPQ2013AGJE-5-AEC1C672-Z:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPQ2013AGJE-5-AEC1C672-Z Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
