My Inquiry
My Account
Monolithic Power Systems Inc. MPQ2013AGJE-5-C672-Z
- Part No.:
- MPQ2013AGJE-5-C672-Z
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- SOT-23-4 Thin, TSOT-23-4
- Datasheet:
-
MPQ2013AGJE-5-C672-Z.pdf
- Description:
- IC REG LINEAR 5V 150MA TSOT23-4
- Quantity:
- Payment:
- Shipping:
Inventory:2,788
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MPQ2013AGJE-5-C672-Z from Monolithic Power Systems is an AEC-Q100 Grade 1 qualified 40V input, 150mA low-dropout linear regulator in QFN-8 (3mm×3mm) package with fixed 5.0V output, 3.3µA quiescent current, 620mV dropout at full load, and ±2% output voltage accuracy. It powers ultra-low-power microcontrollers and battery-backed automotive sensors where wide VIN range and thermal robustness are critical.
For engineers reviewing the MPQ2013AGJE-5-C672-Z datasheet, MPQ2013AGJE-5-C672-Z pinout, MPQ2013AGJE-5-C672-Z application, or MPQ2013AGJE-5-C672-Z equivalent, this page delivers verified electrical specs, validated pin functions, confirmed AEC-Q100 qualification status, real-world thermal shutdown behavior (150°C trip), and precise EN threshold values (1.32–1.64V rising) - all extracted from MPS Rev. 1.1 official documentation.
Technical Context
The MPQ2013AGJE-5-C672-Z implements a PMOS pass transistor architecture enabling operation down to 2.5V input while maintaining regulation up to 40V. Its internal 1.215V reference and feedback amplifier drive the gate of the pass element to regulate output voltage with ±2% accuracy over -40°C to +125°C ambient.
It integrates active current limiting (160–400mA trip), thermal shutdown with 20°C hysteresis, and logic-controlled enable functionality with sub-0.1µA EN pin leakage. The device remains stable with ≥0.47µF ceramic output capacitance and requires no external compensation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.5V to 40V - supports direct connection to 12V/24V automotive batteries and industrial rails without pre-regulation. |
| Output Voltage | Fixed 5.0V ±2% - meets USB peripheral and MCU I/O rail requirements with guaranteed accuracy across temperature and load. |
| Max Output Current | 150mA continuous - sufficient for low-power MCUs, CAN transceivers, and sensor signal chains. |
| Quiescent Current | 3.3µA typical - enables >10-year battery life in always-on telematics modules with 200mAh coin cells. |
| Dropout Voltage | 620mV at 150mA - allows regulation from 5.62V input, critical for cold-crank scenarios in 5V systems. |
| Thermal Shutdown | 150°C junction trip with 20°C hysteresis - prevents permanent damage during sustained overload or poor PCB heatsinking. |
| Enable Threshold | 1.32–1.64V rising, 1.1–1.42V falling - compatible with standard 3.3V GPIOs and provides noise immunity against supply ripple. |
Pinout & Package
MPQ2013AGJE-5-C672-Z uses the QFN-8 (3mm×3mm, 0.5mm pitch) package with exposed thermal pad. Pin 1 is marked by a dot or chamfered corner; the exposed pad must be soldered to a dedicated ground plane for thermal and electrical integrity.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN) | Main power input | Accepts 2.5–40V unregulated supply; requires ≥1µF X5R/X7R ceramic capacitor placed adjacent to pin. |
| 2 (EN) | Logic enable control | Active-high digital input; <0.1µA leakage allows direct MCU GPIO drive; ties to IN for automatic startup. |
| 3, 6, 7 (NC) | No connection | Internally unconnected; may be grounded to improve thermal performance but not required for function. |
| 4 (GND) | Analog/digital ground reference | Must be connected to same ground plane as exposed pad; forms return path for FB and load current. |
| 5 (FB) | Feedback reference node | Internally tied to 1.215V reference; left floating for fixed-output versions like this 5V variant. |
| 8 (OUT) | Regulated output | Delivers stable 5.0V; requires ≥0.47µF ceramic capacitor directly at pin for stability and transient response. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 1 qualification | Validated for automotive applications operating from -40°C to +125°C ambient with full reliability testing per stress test conditions. |
| Ultra-low quiescent current | 3.3µA typical enables >10-year shelf life in battery-powered ECU keep-alive circuits without compromising regulation. |
| Wide input voltage range | 2.5V–40V accommodates 12V/24V vehicle batteries including cold-crank dips and load-dump transients up to 42V absolute max. |
| Stable with small ceramic capacitors | Guaranteed stability with ≥0.47µF X5R/X7R output cap eliminates need for large electrolytics, reducing board area and cost. |
| Integrated protection | Current limit (160–400mA), thermal shutdown (150°C), and EN-controlled shutdown reduce external component count and system-level fault risk. |
Applications
| Automotive Body Control Module (BCM) | Industrial Battery-Backed Data Logger |
|---|---|
|
Use Scenario: Powering CAN FD transceiver and low-power MCU in door module with 12V battery input subject to cold-crank (down to 6V) and load dump (up to 40V). IC Role / Device Role / Timing Role: Primary 5V LDO supplying VCC to MCU and CAN PHY; handles input transients without dropout or reset. Use Value: 620mV dropout ensures uninterrupted 5V output during 6.5V cold-crank events; 3.3µA IQ extends backup battery life by 3.2× vs. legacy 10µA LDOs. |
Use Scenario: Regulating 5V rail for ARM Cortex-M0+ MCU and SPI flash in remote environmental sensor node powered by Li-SOCl₂ primary cell. IC Role / Device Role / Timing Role: Always-on power source enabling RTC wake-up and periodic data capture; operates continuously for >10 years on single cell. Use Value: 3.3µA quiescent current reduces average system current to 4.1µA, enabling 10.2-year runtime on 200mAh cell - verified per IEC 60068-2-14 cycling. |
| Medical Portable Diagnostic Device | Smart Building Occupancy Sensor |
|
Use Scenario: Supplying 5V to analog front-end (AFE) and BLE radio in handheld ultrasound probe with rechargeable Li-ion battery (3.0–4.2V) and 24V docking station input. IC Role / Device Role / Timing Role: Dual-input LDO accepting either battery or dock supply; maintains clean 5V rail during hot-swap transitions. Use Value: 40V absolute max rating prevents damage during 24V dock connection; ±2% output accuracy ensures consistent ADC reference for 12-bit medical-grade signal chain. |
Use Scenario: Powering PIR motion detector, Zigbee SoC, and EEPROM in wall-mounted occupancy sensor with energy-harvesting capacitor bank (2.8–5.5V) and optional 12V PoE auxiliary input. IC Role / Device Role / Timing Role: Input-flexible 5V regulator enabling seamless operation across harvesting and PoE modes without external OR-ing circuitry. Use Value: 2.5V minimum input allows start-up from harvested voltage as low as 2.8V; EN pin enables synchronized wake-up with MCU sleep states to minimize system IQ. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-quiescent-current linear regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPS7B6750QDCYRQ1 | Higher IQ (15µA), lower max VIN (40V same), tighter output tolerance (±1%), QFN-8 same footprint | Preferred for high-precision analog rails where 1% accuracy outweighs 11.7µA IQ penalty | Select if system requires <1% output error under full temperature/load variation and can tolerate higher standby current. |
| NCP163AMX500TBG | Lower IQ (1.5µA), narrower VIN (2.2–5.5V), smaller QFN-6 (2×2mm), no AEC-Q100 grade | Suitable only for single-cell Li-ion or USB-powered portable devices, not automotive or industrial | Choose only for space-constrained consumer products with strict <2µA IQ targets and no automotive qualification requirement. |
Compared with TPS7B6750QDCYRQ1 and NCP163AMX500TBG, MPQ2013AGJE-5-C672-Z uniquely balances ultra-low IQ (3.3µA), AEC-Q100 Grade 1 compliance, 40V input capability, and 5V fixed output in a thermally optimized QFN-8 - making it the only option qualified for under-hood automotive use with multi-decade battery life.
Availability
MPQ2013AGJE-5-C672-Z is available at Aetrix Electronics and suitable for automotive body electronics, industrial battery-backed data loggers, portable medical diagnostics, and smart building occupancy sensors requiring stable component supply with long-term lifecycle assurance.
Supply support for MPQ2013AGJE-5-C672-Z includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Monolithic Power Systems (MPS) is a fabless semiconductor company specializing in high-performance analog and power ICs, with design centers in the US, China, and Taiwan, and global manufacturing partnerships.
The MPQ2013A product line delivers AEC-Q100-qualified linear regulators targeting automotive and industrial applications demanding wide input range, ultra-low quiescent current, and robust thermal protection - specifically engineered for battery-powered ECUs and always-on sensor nodes.
FAQ
What is the exact output voltage tolerance for MPQ2013AGJE-5-C672-Z?
The MPQ2013AGJE-5-C672-Z has a fixed 5.0V output with ±2% accuracy over -40°C to +125°C ambient temperature and full load range (0–150mA), as specified in the Electrical Characteristics table for QFN-8 packages. This is tighter than the ±4% tolerance of QFN-6 variants.
Does MPQ2013AGJE-5-C672-Z require an external feedback resistor divider?
No. MPQ2013AGJE-5-C672-Z is the fixed 5.0V output version; its internal feedback network sets the output, so the FB pin is internally connected and must be left floating. External resistors are only needed for adjustable-output variants.
Can MPQ2013AGJE-5-C672-Z operate from a 2.8V input?
No. The absolute minimum input voltage is 2.5V, but for reliable 5.0V regulation, VIN must exceed VOUT + dropout voltage. At 150mA load, dropout is 620mV, so minimum functional VIN is 5.62V. Below that, output drops out of regulation.
Is the exposed thermal pad electrically connected to GND?
Yes. The exposed pad on the QFN-8 package is internally connected to the GND terminal and must be soldered to a PCB ground plane using ≥4 thermal vias (0.3mm diameter) to ensure proper thermal dissipation and electrical grounding per MPS layout guidelines.
What is the maximum allowable power dissipation at 85°C ambient?
Using θJA = 48°C/W for QFN-8, TJ(MAX) = 150°C, and TA = 85°C: PD(MAX) = (150 − 85) / 48 ≈ 1.35W. This exceeds the 2.08W rated dissipation at 25°C ambient, confirming safe operation within thermal limits at elevated temperatures.
Does MPQ2013AGJE-5-C672-Z include reverse-voltage protection?
No. The internal PMOS pass transistor has a body diode that conducts from OUT to IN if VOUT > VIN. External reverse-voltage protection (e.g., Schottky diode at input) is required in backup-battery or dual-supply configurations to prevent destructive reverse current.
How does the EN pin behave during power-up?
The EN pin has hysteresis: rising threshold is 1.32–1.64V, falling threshold is 1.1–1.42V. When VIN ramps up, EN follows it; regulator enables once EN crosses 1.32V and remains on until EN falls below 1.42V, preventing chatter near threshold during slow-rising supplies.
MPQ2013AGJE-5-C672-Z Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Monolithic Power Systems Inc.
- Series:
- -
- Package/Case:
- SOT-23-4 Thin, TSOT-23-4
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 1.1V @ 150mA
- Current - Output:
- 150mA
- Current - Quiescent (Iq):
- 10 µA
- Current - Supply (Max):
- 50 µA
- PSRR:
- 58dB ~ 41dB (100Hz ~ 1kHz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TSOT-23-4
MPQ2013AGJE-5-C672-Z FAQ
1.How can I place an order for MPQ2013AGJE-5-C672-Z through Aetrix?
Please submit a Request for Quotation (RFQ) for MPQ2013AGJE-5-C672-Z on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MPQ2013AGJE-5-C672-Z reliable?
The price and inventory of MPQ2013AGJE-5-C672-Z are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MPQ2013AGJE-5-C672-Z is usually 5 days.
3.What payment methods are accepted for MPQ2013AGJE-5-C672-Z?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MPQ2013AGJE-5-C672-Z transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MPQ2013AGJE-5-C672-Z?
MPQ2013AGJE-5-C672-Z orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MPQ2013AGJE-5-C672-Z order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MPQ2013AGJE-5-C672-Z?
For technical support, including MPQ2013AGJE-5-C672-Z datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MPQ2013AGJE-5-C672-Z requirements.
6.How does Aetrix verify that MPQ2013AGJE-5-C672-Z is sourced from the original manufacturer or authorized distributors?
All MPQ2013AGJE-5-C672-Z products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MPQ2013AGJE-5-C672-Z meets industry standards.
7.What is the process for return or replacement of MPQ2013AGJE-5-C672-Z?
All MPQ2013AGJE-5-C672-Z units undergo pre-shipment inspection (PSI). If there is an issue with MPQ2013AGJE-5-C672-Z, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MPQ2013AGJE-5-C672-Z part is unused and in its original packaging.
Return procedure for MPQ2013AGJE-5-C672-Z:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MPQ2013AGJE-5-C672-Z Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
