My Inquiry
My Account
Texas Instruments MSP430F2410TPM
- Part No.:
- MSP430F2410TPM
- Manufacturer:
- Texas Instruments
- Category:
- Microcontrollers
- Package:
- 64-LQFP
- Datasheet:
-
MSP430F2410TPM.pdf
- Description:
- IC MCU 16BIT 56KB FLASH 64LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:4,915
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MSP430F2410TPM from Texas Instruments is an ultra-low-power 16-bit RISC microcontroller with 56 KB+256 B flash memory, 4 KB RAM, a 12-bit ADC with 8 channels, two 16-bit timers (Timer_A with 3 capture/compare registers and Timer_B with 7 plus shadow registers), four USCI modules (dual UART/IrDA/SPI + dual I²C/SPI), and on-chip comparator. It operates from 1.8 V to 3.6 V and targets battery-powered sensor nodes and portable instrumentation.
For engineers reviewing the MSP430F2410TPM datasheet, MSP430F2410TPM pinout, MSP430F2410TPM application, or MSP430F2410TPM equivalent, key selection considerations include its 64-pin QFP package, integrated ADC12 module (confirmed for MSP430F2410, unlike F24x1 variants), ultra-fast wake-up (<1 µs), and dual USCI_A/USCI_B support for concurrent serial protocols in space-constrained embedded designs.
Technical Context
The MSP430F2410TPM implements a 16-bit CPU with constant generators and hardware multiplier for efficient C code execution. Its basic clock system includes a calibrated DCO (±1% over temperature/voltage), internal LF oscillator, and support for external crystals (XT1 up to 32 kHz, XT2 up to 16 MHz).
It integrates two independent USCI modules per interface type: USCI_A0/A1 support enhanced UART with auto-baud detection and IrDA, while USCI_B0/B1 support both I²C master/slave and synchronous SPI - enabling simultaneous multi-protocol communication without software arbitration overhead.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | 16-bit RISC CPU with 62.5-ns instruction cycle; enables deterministic real-time control and compact firmware footprint. |
| Flash / RAM | 56 KB + 256 B flash memory with security fuse; 4 KB RAM - sufficient for complex sensor fusion algorithms with retained state in low-power modes. |
| ADC Resolution | 12-bit SAR ADC with 8 input channels, internal reference, sample-and-hold, and autoscan - supports high-fidelity analog signal acquisition in portable meters. |
| Power Modes | Active mode: 270 µA at 1 MHz/2.2 V; Standby: 0.3 µA (VLO); Off with RAM retention: 0.1 µA - extends coin-cell battery life to years in intermittent-sensing applications. |
| Wake-up Time | <1 µs from standby to active mode - critical for event-driven systems requiring immediate response to external interrupts or timer expiry. |
| USCI Peripherals | Four USCI modules: USCI_A0/A1 (UART/IrDA/SPI), USCI_B0/B1 (I²C/SPI) - allows concurrent serial bus management (e.g., I²C sensor hub + UART telemetry link). |
| Timer Resources | Timer_A with 3 capture/compare registers; Timer_B with 7 capture/compare registers and shadow registers - supports precise PWM generation, input capture for pulse-width measurement, and synchronized multi-channel timing. |
Pinout & Package
Package: 64-pin Plastic Quad Flat Package (QFP, PM). Thermal pad not present; standard leaded QFP with 0.5 mm pitch and 10 mm × 10 mm body.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| DVCC (Pin 1) | Digital supply voltage | Primary power rail for all digital logic; requires local 100 nF decoupling to DVSS. |
| AVCC (Pin 64) | Analog supply voltage | Isolated supply for ADC12 and comparator; must be filtered separately from DVCC to minimize noise coupling. |
| P6.0–P6.7 (Pins 59,60,61,2,3,4,5,6) | Analog inputs A0–A7 | Eight dedicated ADC12 input channels; P6.7 doubles as SVSIN for supply voltage supervision. |
| USCI_A0/A1 & USCI_B0/B1 pins (e.g., P3.0–P3.7, P4.0–P4.7, P5.0–P5.3) | Serial interface I/O | Configurable for UART, IrDA, SPI, or I²C; multiple modules enable independent full-duplex communication paths. |
| RST/NMI (Pin 58) | Reset & non-maskable interrupt | Hardware reset input and NMI source; also triggers bootstrap loader when held during power-up. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low-power operation | 0.1 µA off-mode current with RAM retention enables decade-scale battery life in wireless sensor endpoints. |
| Integrated ADC12 with autoscan | Automated sequential conversion across 8 channels reduces CPU intervention and power consumption during data logging. |
| Dual USCI_A + dual USCI_B | Enables simultaneous UART telemetry and I²C sensor polling without time-slicing or peripheral contention. |
| Calibrated DCO with ±1% accuracy | Eliminates need for external crystal in cost-sensitive applications while maintaining reliable timing for UART baud rates. |
| Hardware multiplier (MPY/MPYS/MAC) | Accelerates math-intensive tasks like FIR filtering or sensor calibration, reducing active-mode duration and total energy per computation. |
Applications
| Smart Energy Metering | Portable Medical Instrumentation |
|---|---|
Use Scenario: Battery-powered electricity meter collecting voltage, current, and power factor via shunt/CT sensors. IC Role / Device Role / Timing Role: Main controller executing metrology algorithms, managing LCD display, and transmitting data via UART/RS-485. Use Value: 12-bit ADC with internal reference and autoscan ensures accurate multi-channel sampling; ultra-low standby current extends 10-year battery life. | Use Scenario: Handheld blood glucose monitor with electrochemical sensor interface and OLED display. IC Role / Device Role / Timing Role: Analog front-end controller acquiring sensor signals, performing calibration, and driving user interface. Use Value: On-chip comparator and programmable SVS detect sensor fault conditions; fast wake-up enables responsive button press handling. |
| Industrial Sensor Node | Wireless Remote Terminal Unit (RTU) |
Use Scenario: DIN-rail mounted temperature/humidity/pressure node communicating via RS-485 Modbus. IC Role / Device Role / Timing Role: Primary MCU managing sensor reads, protocol stack, and isolated serial interface. Use Value: Dual USCI_A modules allow concurrent Modbus RTU (UART) and diagnostics port (UART), eliminating need for external UART expanders. | Use Scenario: Solar-powered remote telemetry unit monitoring tank levels and valve status in oil/gas field. IC Role / Device Role / Timing Role: Low-power host controller interfacing with LoRaWAN modem and analog sensors. Use Value: 56 KB flash stores robust firmware with OTA update capability; 4 KB RAM accommodates packet buffering and encryption context. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ultra-low-power mixed-signal microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MSP430F249TPM | 60 KB+256 B flash, 2 KB RAM, identical peripherals and pinout | Higher flash capacity suits larger protocol stacks; reduced RAM may constrain multitasking in complex firmware. | Select when firmware size exceeds 56 KB but RAM demand stays ≤2 KB. |
| MSP430F248TPM | 48 KB+256 B flash, 4 KB RAM, same USCI/timer/ADC configuration | Lower flash suitable for streamlined applications; retains full RAM for data buffering or real-time processing. | Select when application logic fits in 48 KB and full 4 KB RAM is required for sensor data aggregation. |
Compared with MSP430F249TPM and MSP430F248TPM, the MSP430F2410TPM offers optimal balance of flash (56 KB) and RAM (4 KB) for mid-complexity sensor edge nodes requiring both firmware headroom and runtime memory - avoiding over-provisioning or resource bottlenecks.
Availability
MSP430F2410TPM is available at Aetrix Electronics and suitable for smart metering, portable medical devices, industrial sensor nodes, and wireless RTUs requiring stable component supply across multi-year production cycles.
Supply support for MSP430F2410TPM includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor leader specializing in analog, embedded processing, and connectivity technologies with decades of microcontroller innovation.
The MSP430F2410TPM belongs to the MSP430F2xx ultra-low-power MCU family, designed specifically for battery-operated measurement and sensing applications where energy efficiency, integration, and long-term reliability are critical.
FAQ
What is the maximum operating frequency of the MSP430F2410TPM?
The MSP430F2410TPM supports internal DCO frequencies up to 16 MHz, with four factory-calibrated settings accurate to ±1% across voltage and temperature. External crystal sources (XT1 and XT2) can drive the system clock at up to 16 MHz, enabling precise timing for UART baud generation and high-speed ADC sampling.
Does the MSP430F2410TPM include an integrated ADC module?
Yes, the MSP430F2410TPM includes a 12-bit ADC (ADC12) with 8 input channels, internal reference voltage, sample-and-hold, and autoscan functionality. This is confirmed in the device description and functional block diagram for MSP430F2410 - distinguishing it from the MSP430F24x1 series, which omits the ADC12 module.
What package type is used for the MSP430F2410TPM?
The MSP430F2410TPM uses a 64-pin Plastic Quad Flat Package (QFP), designated by the "PM" suffix. This package has a 0.5 mm lead pitch and 10 mm × 10 mm body size, compatible with standard surface-mount assembly processes and widely supported by development tools like the MSP-TS430PM64 target board.
How many USCI modules does the MSP430F2410TPM support?
The MSP430F2410TPM supports four USCI modules: USCI_A0 and USCI_A1 (for UART, IrDA, and SPI), and USCI_B0 and USCI_B1 (for I²C and SPI). This dual-pair architecture allows independent, concurrent serial communication - for example, running I²C sensor polling on USCI_B0 while transmitting telemetry via UART on USCI_A0.
What low-power modes are available on the MSP430F2410TPM?
The MSP430F2410TPM offers five low-power modes: LPM0–LPM4. In LPM3 (standby with VLO), current draw is 0.3 µA; in LPM4 (off mode with RAM retention), it drops to 0.1 µA. Wake-up from any LPM to active mode occurs in less than 1 µs, making it ideal for interrupt-driven, event-responsive embedded systems.
MSP430F2410TPM Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Package/Case:
- 64-LQFP
- Series:
- MSP430F2xx
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Verified
- Core Processor:
- MSP430 CPU16
- Core Size:
- 16-Bit
- Speed:
- 16MHz
- Connectivity:
- I2C, IrDA, LINbus, SCI, SPI, UART/USART
- Peripherals:
- Brown-out Detect/Reset, POR, PWM, WDT
- Number of I/O:
- 48
- Program Memory Size:
- 56KB (56K x 8 + 256B)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 4K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.8V ~ 3.6V
- Data Converters:
- A/D 8x10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
MSP430F2410TPM FAQ
1.How can I place an order for MSP430F2410TPM through Aetrix?
Please submit a Request for Quotation (RFQ) for MSP430F2410TPM on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MSP430F2410TPM reliable?
The price and inventory of MSP430F2410TPM are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MSP430F2410TPM is usually 5 days.
3.What payment methods are accepted for MSP430F2410TPM?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MSP430F2410TPM transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MSP430F2410TPM?
MSP430F2410TPM orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MSP430F2410TPM order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MSP430F2410TPM?
For technical support, including MSP430F2410TPM datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MSP430F2410TPM requirements.
6.How does Aetrix verify that MSP430F2410TPM is sourced from the original manufacturer or authorized distributors?
All MSP430F2410TPM products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MSP430F2410TPM meets industry standards.
7.What is the process for return or replacement of MSP430F2410TPM?
All MSP430F2410TPM units undergo pre-shipment inspection (PSI). If there is an issue with MSP430F2410TPM, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MSP430F2410TPM part is unused and in its original packaging.
Return procedure for MSP430F2410TPM:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MSP430F2410TPM Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
