My Inquiry
My Account
Texas Instruments MSP430F5510IPT
- Part No.:
- MSP430F5510IPT
- Manufacturer:
- Texas Instruments
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
MSP430F5510IPT.pdf
- Description:
- IC MCU 16BIT 32KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:245
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
MSP430F5510IPT from Texas Instruments is a 16-bit ultra-low-power mixed-signal microcontroller with integrated full-speed USB 2.0 PHY, 32 KB flash, 4 KB + 2 KB RAM, 10-bit ADC (8 channels: 6 external, 2 internal), two USCI modules (UART/IrDA/SPI/I²C), four 16-bit timers, RTC, and hardware multiplier - designed for battery-powered sensor systems and USB-connected data loggers.
For engineers reviewing the MSP430F5510IPT datasheet, MSP430F5510IPT pinout, MSP430F5510IPT application, or MSP430F5510IPT equivalent, key selection criteria include USB PHY integration, LQFP-48 package compatibility, 1.8–3.6 V operation, sub-2 µA LPM3 current, and dual-USCI support with port-mapped flexibility on P4.
Technical Context
The MSP430F5510IPT implements a unified clock system with FLL stabilization, programmable LDO core regulation, and multiple low-power oscillators (VLO, REFO, XT1, XT2 up to 32 MHz). Its CPUXV2 core executes instructions in single-cycle mode with constant generators for optimized code density.
USB functionality is fully integrated with dedicated 3.3-V/1.8-V power rails, USB-PLL, eight endpoints, and DP/DM/PUR I/Os. The port mapping controller on P4 enables dynamic assignment of USCI_A1/B1 signals, though simultaneous use of all functions is constrained by pin multiplexing in the 48-pin LQFP package.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | 16-bit RISC CPUXV2 with constant generators and 25-MHz max system clock |
| Flash / RAM | 32 KB flash (in-system programmable) + 4 KB main RAM + 2 KB USB SRAM (usable as general-purpose when USB inactive) |
| ADC | 10-bit SAR ADC10_A with 200 ksps sampling, 8 input channels (6 external analog inputs + 2 internal references) |
| USB Interface | Full-speed USB 2.0 compliant with integrated PHY, 8 IN/8 OUT endpoints, and dedicated DP/DM/PUR pins |
| Low-Power Modes | LPM3: 1.9 µA at 2.2 V (RTC active, full RAM retention); LPM4.5: 0.18 µA at 3 V (shutdown mode) |
| Timers & Peripherals | Four 16-bit timers (TA0/TA1/TA2/TB0), RTC_A with alarm, three-channel DMA, hardware MPY32, comparator B |
| Supply Range | 1.8 V to 3.6 V operation with integrated LDO, supply supervision, and brownout reset |
Pinout & Package
LQFP-48 package (7 mm × 7 mm), thermally enhanced with exposed pad recommended to be connected to DVSS.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1–4, 6–7, 9–10, 12–13, 15–22, 24–26, 29–36, 38–40, 42–44, 46–48 | General-purpose I/O (P1–P6, PJ) | Configurable digital I/O with Schmitt-trigger inputs; some support peripheral functions (e.g., TA0CLK, UCA0TXD) via port mapping |
| 5, 8, 11, 14, 23, 27–28, 37, 41, 45 | Power & Reference | AVCC1/AVSS1 (analog supply/ground), DVCC1/DVSS1/DVCC2/DVSS2 (digital supply/ground), VCORE (regulated core voltage), VSSU (USB ground) |
| 38 (PU.0), 40 (PU.1), 39 (PUR) | USB Physical Layer | DP (data plus), DM (data minus), PUR (pull-up resistor control for USB enumeration) |
| 41 (VBUS), 42 (VUSB), 43 (V18) | USB Power System | VBUS sense input; VUSB = 3.3-V USB power rail; V18 = 1.8-V USB PLL supply |
| 47 (TEST/SBWTCK), 48 (RST/NMI/SBWTDIO) | Debug & Reset | SBW (Spy-Bi-Wire) programming/debug interface; RST/NMI supports reset and non-maskable interrupt |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low standby current | 1.9 µA in LPM3 with RTC, watchdog, and full RAM retention - enables multi-year battery life in data loggers |
| Integrated USB 2.0 PHY | Eliminates external transceiver; supports device-mode enumeration and endpoint management without host negotiation overhead |
| Port mapping controller (P4) | Enables runtime reassignment of USCI_A1/B1 functions (UART/I²C/SPI) to P4.0–P4.5, increasing design flexibility in pin-constrained layouts |
| Dual USCI modules | USCI_A0/A1 support UART/IrDA/SPI; USCI_B0/B1 support I²C/SPI - allows concurrent serial protocols (e.g., I²C sensor bus + UART debug channel) |
| Hardware multiplier (MPY32) | Completes 32-bit multiply in one cycle - accelerates FFT, filtering, and sensor fusion algorithms in real-time firmware |
Applications
| USB-Powered Sensor Node | Data Logger with RTC |
|---|---|
Use Scenario: Compact environmental monitor powered directly from USB bus, logging temperature/humidity via I²C sensors and transmitting data over USB CDC ACM. IC Role / Device Role / Timing Role: Main MCU with integrated USB device stack, RTC for timestamped samples, and 10-bit ADC for analog sensor interfacing. Use Value: Eliminates external USB transceiver and crystal oscillator (uses integrated USB-PLL and REFO), reducing BOM count by ≥3 components. | Use Scenario: Battery-backed field recorder capturing analog sensor data at fixed intervals, storing timestamps and values in flash, and uploading batches via USB upon host connection. IC Role / Device Role / Timing Role: Low-power controller executing LPM3 sleep between samples, waking via RTC alarm, and using DMA to offload ADC-to-RAM transfers. Use Value: Achieves <2 µA average system current during logging intervals, extending CR2032 battery life beyond 3 years. |
| Wireless Headset Bridge | Industrial USB Interface Adapter |
Use Scenario: Bluetooth headset dongle that converts audio control commands (play/pause/volume) from USB HID to UART commands for BLE SoC. IC Role / Device Role / Timing Role: USB HID device controller translating reports into serial protocol; uses USCI_A0 for UART and USCI_B0 for I²C configuration of codec. Use Value: Single-chip bridge avoids dual-MCU architecture - reduces latency, PCB area, and firmware complexity. | Use Scenario: DIN-rail mounted adapter converting legacy RS-485 industrial sensor output to USB virtual COM port for PC-based SCADA systems. IC Role / Device Role / Timing Role: Protocol translator with UART (USCI_A0) for RS-485 transceiver and USB device interface for host communication. Use Value: Leverages integrated USB-PLL and LDO to operate from wide-input 3.3–5 V supplies while maintaining USB compliance. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ultra-low-power USB microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MSP430F5529IPN | 64-pin LQFP; 128 KB flash, 8 KB RAM; same USB/USCI/peripheral set; adds 12-bit ADC and more I/O (47 vs. 31) | Suitable for designs requiring higher memory headroom or additional analog inputs | Select when scaling firmware complexity or adding more sensor channels beyond MSP430F5510IPT's 31 I/O limit |
| MSP430F5638IZQER | 80-pin nFBGA; 256 KB flash, 16 KB RAM; identical USB/USCI/peripheral feature set; supports higher-frequency XT2 (up to 40 MHz) | Targeted at high-throughput USB applications (e.g., streaming audio) needing larger code space and faster CPU clock | Choose for future-proofing or when migrating to TI's F56xx platform with extended memory and performance |
Compared with MSP430F5529IPN and MSP430F5638IZQER, the MSP430F5510IPT offers optimal balance of USB integration, ultra-low-power operation, and compact LQFP-48 footprint - making it ideal for cost-sensitive, space-constrained USB-peripheral designs where 32 KB flash suffices.
Availability
MSP430F5510IPT is available at Aetrix Electronics and suitable for USB-connected sensor nodes, battery-powered data loggers, and industrial interface adapters requiring stable component supply and long-term manufacturability.
Supply support for MSP430F5510IPT includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor company specializing in analog and embedded processing technologies, with leadership in low-power microcontrollers and signal chain solutions.
The MSP430F5510IPT belongs to the MSP430F5xx ultra-low-power MCU family, engineered for precision sensing and USB-connected portable instrumentation where energy efficiency and integrated connectivity are critical.
FAQ
What is the maximum operating frequency of the MSP430F5510IPT?
The MSP430F5510IPT supports a maximum system clock frequency of 25 MHz, achieved via its digitally controlled oscillator (DCO) with FLL stabilization using external crystals (XT1 up to 32 kHz, XT2 up to 32 MHz) or internal references. This frequency enables real-time processing of USB transactions and sensor data without compromising ultra-low-power operation in active mode.
Does the MSP430F5510IPT require an external crystal for USB operation?
No - the MSP430F5510IPT integrates a USB-PLL that locks to the internal DCO or external XT2 source, eliminating the need for a separate 48-MHz crystal. USB timing compliance is maintained using the on-chip PLL referenced to XT2 (up to 32 MHz) or the DCO, with built-in jitter tolerance per USB 2.0 full-speed specifications.
How many USB endpoints does the MSP430F5510IPT support?
The MSP430F5510IPT supports eight bidirectional endpoints (four IN and four OUT), configurable as control, interrupt, bulk, or isochronous transfers. Endpoint 0 is reserved for standard USB control transfers, while endpoints 1–7 are user-configurable in firmware - sufficient for CDC, HID, and custom class implementations without external USB controller logic.
Can the MSP430F5510IPT operate from a single 3.3-V supply?
Yes - the MSP430F5510IPT operates from a single 3.3-V supply applied to DVCC and AVCC pins. Its integrated LDO regulates VCORE to 1.8 V for the CPU and peripherals, while the USB power system independently generates V18 (1.8 V) and VUSB (3.3 V) from the same input, meeting USB electrical requirements without external regulators.
What is the function of the PUR pin on the MSP430F5510IPT?
The PUR (Pull-Up Resistor) pin on the MSP430F5510IPT controls the internal 1.5-kΩ USB pull-up resistor on the DP line. Driving PUR high enables the pull-up, signaling USB host detection and initiating device enumeration; driving PUR low disables it, placing the device in unconnected state - enabling firmware-controlled USB attach/detach behavior.
MSP430F5510IPT Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Package/Case:
- 48-LQFP
- Series:
- MSP430F5xx
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- MSP430 CPUXV2
- Core Size:
- 16-Bit
- Speed:
- 25MHz
- Connectivity:
- I2C, IrDA, LINbus, SCI, SPI, UART/USART, USB
- Peripherals:
- Brown-out Detect/Reset, DMA, POR, PWM, WDT
- Number of I/O:
- 31
- Program Memory Size:
- 32KB (32K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 6K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.8V ~ 3.6V
- Data Converters:
- A/D 8x10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
MSP430F5510IPT FAQ
1.How can I place an order for MSP430F5510IPT through Aetrix?
Please submit a Request for Quotation (RFQ) for MSP430F5510IPT on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for MSP430F5510IPT reliable?
The price and inventory of MSP430F5510IPT are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for MSP430F5510IPT is usually 5 days.
3.What payment methods are accepted for MSP430F5510IPT?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for MSP430F5510IPT transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for MSP430F5510IPT?
MSP430F5510IPT orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your MSP430F5510IPT order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for MSP430F5510IPT?
For technical support, including MSP430F5510IPT datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your MSP430F5510IPT requirements.
6.How does Aetrix verify that MSP430F5510IPT is sourced from the original manufacturer or authorized distributors?
All MSP430F5510IPT products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that MSP430F5510IPT meets industry standards.
7.What is the process for return or replacement of MSP430F5510IPT?
All MSP430F5510IPT units undergo pre-shipment inspection (PSI). If there is an issue with MSP430F5510IPT, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The MSP430F5510IPT part is unused and in its original packaging.
Return procedure for MSP430F5510IPT:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
MSP430F5510IPT Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
