My Inquiry
My Account
onsemi NCP562SQ27T1
- Part No.:
- NCP562SQ27T1
- Manufacturer:
- onsemi
- Package:
- SC-82A, SOT-343
- Datasheet:
-
NCP562SQ27T1.pdf
- Description:
- IC REG LINEAR 2.7V 80MA SC82AB
- Quantity:
- Payment:
- Shipping:
Inventory:2,396
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
NCP562SQ27T1 from onsemi is a fixed-output, low-dropout linear voltage regulator delivering 2.7 V at up to 80 mA with ultra-low quiescent current (2.5 µA typical), housed in the SC82-AB (SC70-4) package. It integrates PMOS pass transistor, enable control, thermal shutdown, and current limiting - designed for battery-powered portable electronics requiring stable low-voltage supply under light-load conditions.
For engineers reviewing the NCP562SQ27T1 datasheet, pinout, applications, or equivalent options, key selection criteria include dropout voltage (230 mV @ 80 mA), ±2.0% output accuracy, −40 °C to +85 °C operating range, enable threshold (1.3 V logic high), and compatibility with 0.1 µF ceramic output capacitors.
Technical Context
The NCP562SQ27T1 employs a PMOS pass transistor architecture enabling low dropout and near-zero reverse leakage, with internal reference, error amplifier, and protection circuits (thermal limit, current limit). Its enable input allows precise system-level power sequencing and standby mode control.
It operates across 2.7 V to 6.0 V input range, maintains regulation down to 230 mV dropout at full 80 mA load, and achieves 100 µVRMS output noise (100 Hz–100 kHz) with minimal external components - requiring only 0.1 µF ceramic output capacitance for stability.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | 2.7 V ±2.0% - tightly regulated nominal rail for MCU core or sensor interface supply. |
| Max Output Current | 80 mA - sufficient for low-power microcontrollers, RF transceivers, or analog sensors. |
| Quiescent Current | 2.5 µA typical - enables multi-year battery life in always-on IoT endpoints. |
| Dropout Voltage | 230 mV @ 80 mA - supports operation from single-cell Li-ion (3.0 V min) or two-cell alkaline. |
| Enable Threshold | VTH(HI) = 1.3 V - compatible with 1.8 V/3.3 V GPIO for clean ON/OFF control. |
| Operating Temp | −40 °C to +85 °C - qualified for industrial and consumer portable equipment environments. |
| Output Noise | 100 µVRMS (100 Hz–100 kHz) - suitable for noise-sensitive analog circuitry without added filtering. |
Pinout & Package
Package: SC82-AB (SC70-4), 1.9 mm × 1.3 mm × 0.9 mm surface-mount, Pb-free, RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND | Power ground reference; must be low-impedance connection to minimize noise and dropout error. |
| 2 | Vin | Input supply (2.7–6.0 V); requires local 1.0 µF decoupling capacitor per datasheet recommendation. |
| 3 | Vout | Regulated 2.7 V output; stable with ≥0.1 µF ceramic capacitor; supports fast load transient response. |
| 4 | Enable | Active-high digital control: ≥1.3 V enables regulation; ≤0.3 V disables output and reduces IQ to 0.1 µA. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 2.5 µA typical - extends battery runtime in sleep-mode applications without sacrificing startup speed. |
| Low minimum output capacitance | 0.1 µF ceramic - eliminates need for bulky tantalum or high-ESR capacitors, reducing BOM cost and board area. |
| Integrated enable function | Digital ON/OFF control with defined logic thresholds - enables precise power domain sequencing in multi-rail systems. |
| Thermal and current protection | Internal shutdown at ~160 °C and current limit ~150–300 mA - prevents damage during overload or poor PCB thermal design. |
| Pb-free, Halogen-free, RoHS | Compliant with global environmental regulations - supports green manufacturing and export compliance. |
Applications
| Wearable Health Monitor | Bluetooth LE Sensor Node |
|---|---|
|
Use Scenario: Continuous ECG/PPG sensing powered by coin cell or small Li-ion battery. IC Role / Device Role / Timing Role: Primary 2.7 V supply for ultra-low-power MCU and analog front-end. Use Value: 2.5 µA quiescent current enables >3-year battery life in sleep mode; 230 mV dropout sustains operation down to 2.93 V input. |
Use Scenario: Intermittent temperature/humidity data logging with BLE advertising bursts. IC Role / Device Role / Timing Role: Regulated 2.7 V rail for nRF52832 MCU and Si7021 sensor during active transmission. Use Value: Fast enable/disable (Figure 8) synchronizes power with radio duty cycle, cutting average system IQ by >90%. |
| Portable Barcode Scanner | Smart Remote Control |
|
Use Scenario: Handheld scanner using laser diode and CMOS imager, powered by AA batteries. IC Role / Device Role / Timing Role: Stable 2.7 V supply for image processor and decode ASIC during brief scan events. Use Value: 100 µVRMS noise prevents corruption of analog pixel data; 80 mA capability supports peak imaging loads. |
Use Scenario: IR/RF remote with motion wake-up and voice command, powered by CR2032. IC Role / Device Role / Timing Role: Always-on 2.7 V supply for accelerometer and voice trigger IC in deep-sleep state. Use Value: ±2.0% output accuracy ensures consistent sensor biasing; −40 °C to +85 °C rating covers automotive cabin use. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar LDO regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MCP1700T-2702E/TT | 250 mV dropout @ 250 mA; 1.6 µA IQ; no enable pin; SOT-23-3 package. | Lacks enable control; higher max current but larger footprint; less suitable for sequenced power domains. | Select when enable functionality is unnecessary and higher output current margin is required. |
| TNIV2700024X | 200 mV dropout @ 150 mA; 3.5 µA IQ; enable pin; DFN-4 (1.0×1.0 mm) package. | Smaller footprint and lower dropout, but wider input range (1.7–6.5 V); tighter temp spec (−40 °C to +125 °C). | Prefer for space-constrained designs needing extended temperature support or lower dropout. |
Compared with NCP562SQ27T1, MCP1700T-2702E/TT offers higher current but no enable and larger package, while TNIV2700024X delivers lower dropout and smaller size but targets broader industrial temp ranges - making NCP562SQ27T1 optimal for cost-sensitive, enable-dependent portable designs with standard industrial temperature needs.
Availability
NCP562SQ27T1 is available at Aetrix Electronics and suitable for wearable health monitors, Bluetooth LE sensor nodes, portable barcode scanners, and smart remote controls requiring stable component supply, long-term lifecycle support, and RoHS-compliant packaging.
Supply support for NCP562SQ27T1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (formerly ON Semiconductor) is a global semiconductor supplier specializing in energy-efficient power management, analog, sensor, and connectivity solutions for automotive, industrial, cloud, and consumer markets.
The NCP562 series belongs to onsemi's low-power LDO portfolio, engineered specifically for battery-operated portable devices demanding ultra-low IQ, small footprint, and robust enable-controlled power gating.
FAQ
What is the maximum input voltage rating for the NCP562SQ27T1?
The NCP562SQ27T1 has an absolute maximum input voltage of 6.0 V. Operation above this level risks permanent damage. For reliable long-term performance, the recommended operating input range is 2.7 V to 6.0 V - ensuring proper regulation across the full 230 mV dropout window at 80 mA load. The device includes internal protection against overvoltage stress on the Vin pin.
Does the NCP562SQ27T1 require an external pull-up resistor on the Enable pin?
No, the NCP562SQ27T1 does not require an external pull-up resistor on the Enable pin. When unused, the datasheet specifies connecting Enable directly to Vin to ensure default ON operation. The internal logic threshold (1.3 V high, 0.3 V low) is designed for direct GPIO interfacing; adding external bias may interfere with guaranteed turn-on/turn-off behavior and is not recommended unless specific system-level noise immunity requirements dictate otherwise.
Can the NCP562SQ27T1 operate stably with only a 0.1 µF output capacitor?
Yes, the NCP562SQ27T1 is explicitly characterized and guaranteed stable with a minimum 0.1 µF ceramic output capacitor, as confirmed in the datasheet's "Applications Information" and Figure 1. This low capacitance requirement simplifies layout, reduces cost, and supports miniaturized designs - unlike many older LDOs requiring 1–10 µF tantalum capacitors with specific ESR ranges.
What is the thermal shutdown threshold of the NCP562SQ27T1?
The NCP562SQ27T1 activates thermal shutdown at approximately 160 °C junction temperature, as stated in the "Definitions" section of the datasheet. Once triggered, the regulator disables output until junction temperature falls below the hysteresis threshold (~140 °C), protecting against sustained overtemperature conditions caused by high ambient, poor PCB copper, or excessive power dissipation.
Is the NCP562SQ27T1 pin-compatible with other variants in the NCP562 family?
Yes, all NCP562 variants - including NCP562SQ15T1G, NCP562SQ21T1G, NCP562SQ25T1G, and NCP562SQ27T1G - share identical SC82-AB (SC70-4) pinout and package dimensions. Only the output voltage and top-side marking differ; no PCB redesign is needed when substituting between fixed-voltage versions within the same NCP562 series.
NCP562SQ27T1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Series:
- -
- Package/Case:
- SC-82A, SOT-343
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 6V
- Voltage - Output (Min/Fixed):
- 2.7V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.4V @ 80mA
- Current - Output:
- 80mA
- Current - Quiescent (Iq):
- 1 µA
- Current - Supply (Max):
- 6 µA
- PSRR:
- -
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 85°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SC-82AB
NCP562SQ27T1 FAQ
1.How can I place an order for NCP562SQ27T1 through Aetrix?
Please submit a Request for Quotation (RFQ) for NCP562SQ27T1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for NCP562SQ27T1 reliable?
The price and inventory of NCP562SQ27T1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for NCP562SQ27T1 is usually 5 days.
3.What payment methods are accepted for NCP562SQ27T1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for NCP562SQ27T1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for NCP562SQ27T1?
NCP562SQ27T1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your NCP562SQ27T1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for NCP562SQ27T1?
For technical support, including NCP562SQ27T1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your NCP562SQ27T1 requirements.
6.How does Aetrix verify that NCP562SQ27T1 is sourced from the original manufacturer or authorized distributors?
All NCP562SQ27T1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that NCP562SQ27T1 meets industry standards.
7.What is the process for return or replacement of NCP562SQ27T1?
All NCP562SQ27T1 units undergo pre-shipment inspection (PSI). If there is an issue with NCP562SQ27T1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The NCP562SQ27T1 part is unused and in its original packaging.
Return procedure for NCP562SQ27T1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
NCP562SQ27T1 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
