My Inquiry
My Account
onsemi NCP562SQ33T1G
- Part No.:
- NCP562SQ33T1G
- Manufacturer:
- onsemi
- Package:
- SC-82A, SOT-343
- Datasheet:
-
NCP562SQ33T1G.pdf
- Description:
- IC REG LINEAR 3.3V 80MA SC82AB
- Quantity:
- Payment:
- Shipping:
Inventory:1,923
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
NCP562SQ33T1G from onsemi is a fixed-output, low-dropout linear regulator (LDO) designed for battery-powered portable electronics. It delivers 3.3 V output at up to 80 mA with 2.5 µA typical quiescent current, ±2.0% output voltage accuracy, and 190 mV dropout at 80 mA - enabling ultra-low-power operation in handheld instruments and camcorders.
For engineers reviewing the NCP562SQ33T1G datasheet, pinout, applications, or equivalent options, key selection criteria include its SC82-AB package footprint, enable-controlled ON/OFF functionality, 0.1 µF minimum ceramic output capacitance requirement, and −40 °C to +85 °C operating ambient range.
Technical Context
The NCP562SQ33T1G integrates a PMOS pass transistor, precision voltage reference, error amplifier, and thermal/overcurrent protection. Its enable input allows system-level power sequencing, and it operates stably with low-ESR ceramic capacitors as small as 0.1 µF.
Designed for minimal board space and low static power, the device achieves 190 mV dropout at full 80 mA load and maintains regulation across input voltages from 3.3 V + 190 mV (min) to 6.0 V (max), with line regulation ≤20 mV over 1.5–4.4 V input range.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | 3.3 V ±2.0% - tightly regulated rail for 3.3 V logic, sensors, or RF front-ends. |
| Max Output Current | 80 mA - sufficient for microcontrollers, memory, and peripheral ICs in compact portable systems. |
| Quiescent Current | 2.5 µA typical - enables multi-year battery life in always-on sensor nodes or standby circuits. |
| Dropout Voltage | 190 mV at 80 mA - supports operation down to Vin = 3.49 V, extending usable battery voltage range. |
| Operating Temp | −40 °C to +85 °C - qualified for industrial and consumer portable equipment environments. |
| Input Voltage Range | Up to 6.0 V - compatible with single-cell Li-ion (4.2 V max), two-cell alkaline (3.2 V), or regulated 5 V supplies. |
| Enable Threshold | VTH(HI) = 1.3 V, VTH(LO) = 0.3 V - TTL/CMOS-compatible control with hysteresis for noise-immune switching. |
Pinout & Package
The NCP562SQ33T1G is housed in the SC82-AB (Case 419C) surface-mount package: 2.0 mm × 1.25 mm × 0.9 mm, 4-pin, lead-free, RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | GND | Power ground reference; must be low-impedance connection to minimize noise and ensure regulation stability. |
| 2 | Vin | Input supply pin; accepts 3.49 V to 6.0 V; requires local 1.0 µF decoupling capacitor. |
| 3 | Vout | Regulated 3.3 V output; drives load and requires ≥0.1 µF ceramic capacitor for stability. |
| 4 | Enable | Active-high digital control; pulls low to disable output and reduce IQ to <0.1 µA; connect to Vin if unused. |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low quiescent current | 2.5 µA typical - enables >10-year battery life in 10 µA average-load applications. |
| Stable with 0.1 µF ceramic output cap | No ESR requirement - eliminates need for tantalum or polymer caps, reducing BOM cost and size. |
| Integrated thermal & current limit | Shuts down at ~160 °C junction temp and limits short-circuit current to 150–600 mA - protects PCB and load during fault conditions. |
| ±2.0% output accuracy | Ensures reliable logic-level compatibility and ADC reference stability without external trimming. |
| SC82-AB micro-miniature package | 0.9 mm height and 2.5 mm² footprint - ideal for space-constrained wearables and IoT edge nodes. |
Applications
| Battery-Powered Instruments | Hand-Held Test Equipment |
|---|---|
Use Scenario: Portable multimeter powered by two AA alkaline cells (3.0 V fresh, dropping to 2.4 V). IC Role / Device Role / Timing Role: Primary 3.3 V LDO supplying MCU, display driver, and analog front-end. Use Value: 190 mV dropout allows regulation until battery reaches ~2.5 V, maximizing usable capacity; 2.5 µA IQ extends shelf life. | Use Scenario: Pocket-sized oscilloscope with real-time sampling and LCD interface. IC Role / Device Role / Timing Role: Clean 3.3 V rail for high-speed ADC clocking and FPGA configuration. Use Value: Low output noise (100 µVRMS) prevents sampling jitter; enable pin synchronizes power with wake-up events. |
| Camcorder Power Management | Wireless Sensor Node |
Use Scenario: HD camcorder using single-cell Li-ion (3.0–4.2 V) with burst-mode video recording. IC Role / Device Role / Timing Role: Dedicated 3.3 V supply for image signal processor and SD card interface. Use Value: Stable regulation under fast load transients (10–80 mA steps); 0.1 µF ceramic cap simplifies layout near SoC. | Use Scenario: BLE-enabled temperature node with 10-year coin-cell battery target. IC Role / Device Role / Timing Role: Always-on 3.3 V regulator for ultra-low-power MCU and sensor interface. Use Value: 2.5 µA IQ dominates system sleep current; enable pin allows deep-sleep mode with <0.1 µA total system draw. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar LDO regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MCP1700T-3302E/TT | 250 mV dropout at 250 mA; 1.6 µA IQ; SOT-23-5 package; no enable pin. | Lacks enable control; higher dropout reduces usable battery range in low-Vin scenarios. | Select when enable is unnecessary and higher output current (250 mA) is required. |
| TPS70633DBVR | 220 mV dropout at 150 mA; 1.3 µA IQ; SOT-23-5; enable pin; ±1% accuracy. | Tighter accuracy and lower IQ, but larger package and higher cost; requires 1 µF min Cout. | Choose for precision rails where 1% tolerance and sub-2 µA IQ justify added cost and footprint. |
Compared with MCP1700T-3302E/TT and TPS70633DBVR, the NCP562SQ33T1G offers the smallest footprint (SC82-AB), integrated enable with defined thresholds, and optimal balance of ultra-low IQ, low dropout, and ceramic-cap stability for space- and battery-limited designs.
Availability
NCP562SQ33T1G is available at Aetrix Electronics and suitable for battery-powered instruments, hand-held test equipment, and camcorder power management requiring stable component supply, long-life operation, and compact packaging.
Supply support for NCP562SQ33T1G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (formerly ON Semiconductor) is a global semiconductor supplier specializing in energy-efficient power, analog, sensing, and connectivity solutions for automotive, industrial, cloud, and IoT applications.
The NCP562 series belongs to onsemi's ultra-low-IQ LDO portfolio, engineered specifically for portable battery-operated devices where extended runtime and minimal board area are critical design constraints.
FAQ
What is the minimum input voltage required for the NCP562SQ33T1G to maintain regulation?
The NCP562SQ33T1G requires an input voltage at least 190 mV above its 3.3 V nominal output to sustain regulation at 80 mA load, meaning Vin ≥ 3.49 V. At lighter loads, dropout decreases - e.g., ~140 mV at 50 mA - allowing operation down to ~3.44 V. Input must not fall below this margin or regulation fails.
Does the NCP562SQ33T1G require an external pull-up resistor on the Enable pin?
No, the NCP562SQ33T1G does not require an external pull-up on the Enable pin. When unused, the datasheet specifies connecting Enable directly to Vin to ensure default ON operation. The internal circuitry does not mandate external biasing, and adding a pull-up may interfere with controlled shutdown sequencing.
Can the NCP562SQ33T1G operate with a 0.1 µF ceramic output capacitor?
Yes, the NCP562SQ33T1G is explicitly characterized and guaranteed stable with a minimum 0.1 µF ceramic output capacitor - no ESR requirement. This is confirmed in the datasheet's Applications Information section and distinguishes it from older LDOs needing higher-C or specific-ESR capacitors.
What is the thermal shutdown threshold for the NCP562SQ33T1G?
The NCP562SQ33T1G incorporates thermal protection that activates at approximately 160 °C junction temperature, turning off the output to prevent damage. Recovery occurs once the junction cools sufficiently below this threshold. This feature is internal and requires no external components.
Is the NCP562SQ33T1G pin-compatible with the NCP563SQ33T1G?
No, the NCP562SQ33T1G is not pin-compatible with the NCP563SQ33T1G. While both use the SC82-AB package, Pin 4 is Enable on the NCP562SQ33T1G but No Connect (N/C) on the NCP563SQ33T1G. Swapping them without board revision risks incorrect enable behavior or floating inputs.
NCP562SQ33T1G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Series:
- -
- Package/Case:
- SC-82A, SOT-343
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 6V
- Voltage - Output (Min/Fixed):
- 3.3V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.35V @ 80mA
- Current - Output:
- 80mA
- Current - Quiescent (Iq):
- 1 µA
- Current - Supply (Max):
- 6 µA
- PSRR:
- -
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature
- Operating Temperature:
- -40°C ~ 85°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SC-82AB
NCP562SQ33T1G FAQ
1.How can I place an order for NCP562SQ33T1G through Aetrix?
Please submit a Request for Quotation (RFQ) for NCP562SQ33T1G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for NCP562SQ33T1G reliable?
The price and inventory of NCP562SQ33T1G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for NCP562SQ33T1G is usually 5 days.
3.What payment methods are accepted for NCP562SQ33T1G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for NCP562SQ33T1G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for NCP562SQ33T1G?
NCP562SQ33T1G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your NCP562SQ33T1G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for NCP562SQ33T1G?
For technical support, including NCP562SQ33T1G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your NCP562SQ33T1G requirements.
6.How does Aetrix verify that NCP562SQ33T1G is sourced from the original manufacturer or authorized distributors?
All NCP562SQ33T1G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that NCP562SQ33T1G meets industry standards.
7.What is the process for return or replacement of NCP562SQ33T1G?
All NCP562SQ33T1G units undergo pre-shipment inspection (PSI). If there is an issue with NCP562SQ33T1G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The NCP562SQ33T1G part is unused and in its original packaging.
Return procedure for NCP562SQ33T1G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
NCP562SQ33T1G Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
