My Inquiry
My Account
NXP Semiconductors NCX2202GM,115
- Part No.:
- NCX2202GM,115
- Manufacturer:
- NXP Semiconductors
- Category:
- Comparators
- Package:
- 6-XFDFN
- Datasheet:
-
NCX2202GM,115.pdf
- Description:
- IC COMPARATOR 1 GEN PUR 6XSON
- Quantity:
- Payment:
- Shipping:
Inventory:1,126
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
NCX2202GM,115 from NXP Semiconductors is a single low-voltage, low-power comparator with open-drain output, designed for rail-to-rail input/output operation across 1.3 V to 5.5 V supply range. It delivers 6 µA typical supply current, 0.8 µs typical propagation delay at 20 mV overdrive, and 9 mV typical internal hysteresis - enabling precise threshold detection in battery-powered portable electronics.
For engineers reviewing the NCX2202GM,115 datasheet, NCX2202GM,115 pinout, NCX2202GM,115 application, or NCX2202GM,115 equivalent, this device supports critical low-power sensing, zero-crossing detection, and logic-level translation in space-constrained 3.0 V/5.0 V systems where supply current, input voltage range, and noise immunity are design-critical.
Technical Context
The NCX2202GM,115 implements a CMOS input stage with rail-to-rail common-mode input range extending 0.1 V beyond both rails, eliminating phase inversion under overdriven conditions. Its N-channel open-drain output stage sinks up to 5 mA while maintaining VOL ≤ 0.20 V at 5.5 V supply and 5 mA load.
Internal hysteresis (6–13 mV) is factory-trimmed and temperature-stable, providing consistent noise immunity without external components. The device operates fully from −40 °C to +85 °C ambient, with static characteristics including ±30 mV max input offset voltage and 70 dB min common-mode rejection ratio.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply Voltage Range | 1.3 V to 5.5 V - enables direct use in both 3.0 V and 5.0 V systems without level-shifting |
| Supply Current | 6.0 µA typical - extends battery life in always-on sensor monitoring circuits |
| Propagation Delay | 0.8 µs typical at 20 mV overdrive - supports fast response in timing-critical comparators |
| Hysteresis Voltage | 9 mV typical - ensures clean switching in noisy environments without external feedback |
| Input Offset Voltage | ±30 mV max - defines minimum detectable differential signal at system-level accuracy |
| Output Sink Current | 5 mA max - drives standard pull-up resistors and interfaces directly to 5 V logic inputs |
| Operating Temperature | −40 °C to +85 °C - qualified for industrial and consumer portable equipment deployment |
Pinout & Package
XSON6 package (SOT886): plastic extremely thin small outline package, no leads, 6 terminals, body size 1.0 × 1.45 × 0.5 mm, thermal pad optional, moisture sensitivity level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | OUT | Open-drain comparator output - requires external pull-up resistor; sinks current to VEE |
| 2 | VEE | Negative supply terminal - referenced ground node; all voltages defined relative to VEE |
| 3 | IN+ | Non-inverting input - accepts rail-to-rail analog signals up to VCC and down to VEE |
| 4 | IN− | Inverting input - same rail-to-rail common-mode range as IN+; no phase inversion on overdrive |
| 5 | n.c. | No connection - electrically isolated; must remain unconnected per datasheet |
| 6 | VCC | Positive supply terminal - powers internal circuitry; supports 1.3 V to 5.5 V operation |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail input/output | Enables full-supply-range signal detection and interface compatibility without external biasing |
| Internal hysteresis | 6–13 mV typical - eliminates need for external positive feedback network in noise-prone applications |
| No phase inversion | Guaranteed operation with overdriven inputs - prevents false triggering during large-signal transients |
| ESD robustness | HBM >1500 V, CDM >1000 V - reduces risk of field failure in handling and assembly |
| Low-voltage operation | Functional at 1.3 V - supports direct integration into single-cell Li-ion (2.5–4.2 V) and coin-cell (1.5 V) systems |
Applications
| Cellular Telephone Power Monitoring | Alarm System Threshold Detection |
|---|---|
Use Scenario: Monitoring battery voltage against low-charge cutoff threshold in GSM/UMTS handsets. IC Role / Device Role / Timing Role: Comparator detecting when cell voltage drops below 3.2 V to trigger shutdown sequence. Use Value: 6 µA supply current minimizes parasitic drain during standby; rail-to-rail input captures full battery discharge curve. |
Use Scenario: Sensing door/window contact closure in wired security panels with 12 V supply. IC Role / Device Role / Timing Role: Window comparator front-end detecting tamper-induced voltage shifts on zone lines. Use Value: 9 mV hysteresis rejects line noise; 5.5 V max supply allows direct use with panel's regulated 5 V rail. |
| PDAs Battery Fuel Gauging | Industrial Sensor Signal Conditioning |
Use Scenario: Converting analog battery voltage to digital alert flag for fuel gauge microcontroller. IC Role / Device Role / Timing Role: Single-threshold detector feeding GPIO interrupt on low-battery condition. Use Value: 0.8 µs propagation delay ensures timely MCU wake-up; XSON6 footprint saves PCB area in compact PDA designs. |
Use Scenario: Comparing thermistor-derived voltage against reference in HVAC temperature controllers. IC Role / Device Role / Timing Role: Precision threshold detector converting analog sensor output to ON/OFF control signal. Use Value: ±30 mV input offset ensures <1°C error at mid-scale; −40 °C to +85 °C rating matches industrial ambient requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-voltage comparator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLV3691IDCKR | Higher supply current (150 nA typ), lower hysteresis (not specified), SOT-23-5 package | Limited to ultra-low-power sub-µA systems; lacks guaranteed hysteresis and overdrive tolerance | Prefer NCX2202GM,115 when hysteresis, noise immunity, and 1.3 V operation are required |
| MAX9021AXK+T | Wider supply range (1.6 V to 5.5 V), higher propagation delay (1.5 µs typ), SC70-5 package | Not functional below 1.6 V; slower response limits use in fast transient detection | Choose NCX2202GM,115 for true 1.3 V start-up and sub-microsecond timing precision |
Compared with TLV3691IDCKR and MAX9021AXK+T, the NCX2202GM,115 uniquely combines 1.3 V operation, 6 µA supply current, and factory-trimmed hysteresis - making it optimal for battery-sensitive, noise-prone, and space-constrained comparator applications where reliability across voltage extremes is essential.
Availability
NCX2202GM,115 is available at Aetrix Electronics and suitable for cellular telephones, alarm and security systems, personal digital assistants, and industrial sensor interfaces requiring stable component supply, long-term lifecycle support, and traceable sourcing.
Supply support for NCX2202GM,115 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands, specializing in secure connectivity solutions for automotive, industrial, and consumer markets.
The NCX2202GM,115 belongs to NXP's low-power analog comparator product line, engineered specifically for energy-efficient portable electronics where minimal supply current, wide voltage range, and robust noise immunity are mandatory.
FAQ
What is the minimum operating voltage for the NCX2202GM,115?
The NCX2202GM,115 is guaranteed to operate down to 1.3 V supply voltage, with full functionality across its entire specified temperature range (−40 °C to +85 °C). This enables direct integration into single-cell lithium-ion and alkaline battery systems without voltage boosting. The NCX2202GM,115 maintains rail-to-rail input performance and 6 µA supply current even at this minimum voltage.
Does the NCX2202GM,115 require external hysteresis components?
No, the NCX2202GM,115 integrates factory-trimmed hysteresis of 6–13 mV typical, eliminating the need for external positive feedback resistors. This internal hysteresis provides consistent noise immunity across temperature and supply voltage variations. The NCX2202GM,115 delivers clean output transitions in noisy environments such as power supply monitoring or sensor interfacing without additional passive components.
What is the maximum output sink current capability of the NCX2202GM,115?
The NCX2202GM,115 output stage can sink up to 5 mA while maintaining a low VOL of ≤0.20 V at 5.5 V supply. This allows direct interface with standard 5 V logic inputs using typical pull-up resistors (e.g., 10 kΩ to 5 V yields 0.5 mA load). The NCX2202GM,115 sustains this performance across its full operating temperature range and supply voltage span.
Is the NCX2202GM,115 pin-compatible with other packages in the NCX2202 family?
No - the NCX2202GM,115 uses the XSON6 (SOT886) 6-terminal no-lead package, whereas the NCX2202GW variant uses TSSOP5 (SOT353-1) with 5 leads and different pinout. Pin 5 is n.c. in XSON6 but VCC in TSSOP5; VCC is on pin 6 in XSON6 but pin 5 in TSSOP5. The NCX2202GM,115 requires dedicated PCB layout and cannot be substituted without board revision.
What ESD protection level does the NCX2202GM,115 provide?
The NCX2202GM,115 meets HBM JESD22-A114F Class 1C (>1500 V) and CDM JESD22-C101E (>1000 V) standards. This robust ESD rating reduces susceptibility to damage during handling, PCB assembly, and end-user operation. The NCX2202GM,115 incorporates on-chip protection structures validated per industry-standard test methods, supporting reliable manufacturing and field deployment.
NCX2202GM,115 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Package/Case:
- 6-XFDFN
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Type:
- General Purpose
- Number of Elements:
- 1
- Output Type:
- Open-Drain
- Voltage - Supply, Single/Dual (±):
- 1.3V ~ 5.5V
- :
- 30mV @ 5.5V
- Voltage - Input Offset (Max):
- 1pA
- Current - Input Bias (Max):
- -
- Current - Output (Typ):
- 6µA
- Current - Quiescent (Max):
- 70dB CMRR, 80dB PSRR
- CMRR, PSRR (Typ):
- 0.8µs
- Propagation Delay (Max):
- 20mV
- Hysteresis:
- -40°C ~ 85°C
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- Surface Mount
- :
- 6-XSON, SOT886 (1.45x1)
NCX2202GM,115 FAQ
1.How can I place an order for NCX2202GM,115 through Aetrix?
Please submit a Request for Quotation (RFQ) for NCX2202GM,115 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for NCX2202GM,115 reliable?
The price and inventory of NCX2202GM,115 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for NCX2202GM,115 is usually 5 days.
3.What payment methods are accepted for NCX2202GM,115?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for NCX2202GM,115 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for NCX2202GM,115?
NCX2202GM,115 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your NCX2202GM,115 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for NCX2202GM,115?
For technical support, including NCX2202GM,115 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your NCX2202GM,115 requirements.
6.How does Aetrix verify that NCX2202GM,115 is sourced from the original manufacturer or authorized distributors?
All NCX2202GM,115 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that NCX2202GM,115 meets industry standards.
7.What is the process for return or replacement of NCX2202GM,115?
All NCX2202GM,115 units undergo pre-shipment inspection (PSI). If there is an issue with NCX2202GM,115, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The NCX2202GM,115 part is unused and in its original packaging.
Return procedure for NCX2202GM,115:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
NCX2202GM,115 Tags
-
LM2903DR
Texas Instruments
-
LM339DR
Texas Instruments
-
LM339PWR
Texas Instruments
-
LM393DT
STMicroelectronics
-
LM2901PWR
Texas Instruments
-
LM2903DT
STMicroelectronics
-
LM393DR
Texas Instruments
-
LM239DR
Texas Instruments
-
LM339APWR
Texas Instruments
-
LM2903P
Texas Instruments
-
LM393ADR
Texas Instruments
-
NCX2200GMAZ
NXP Semiconductors
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
