My Inquiry
My Account
onsemi NLX1G332AMX1TCG
- Part No.:
- NLX1G332AMX1TCG
- Manufacturer:
- onsemi
- Category:
- Gates and Inverters
- Package:
- 6-XFLGA
- Datasheet:
-
NLX1G332AMX1TCG.pdf
- Description:
- IC GATE OR 1CH 3-INP 6ULLGA
- Quantity:
- Payment:
- Shipping:
Inventory:3,127
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
NLX1G332AMX1TCG from onsemi is a 3-input CMOS OR gate in a UDFN6 (1.45 × 1.0 mm) package, operating from 1.65 V to 5.5 V supply, with 2.4 ns typical propagation delay at 5.0 V, 24 mA balanced output drive, and overvoltage-tolerant inputs up to 7.0 V - used in logic-level translation and signal combining in space-constrained portable electronics.
For engineers reviewing the NLX1G332AMX1TCG datasheet, pinout, applications, or equivalent options, key selection criteria include input overvoltage tolerance, ultra-small UDFN6 footprint compatibility, rail-to-rail output swing under 1.65–5.5 V operation, and guaranteed 24 mA sink/source capability across temperature.
Technical Context
The NLX1G332AMX1TCG implements a single 3-input positive-logic OR function using advanced CMOS process technology. Its input structure supports overvoltage tolerance independent of VCC, enabling safe interfacing with higher-voltage signals without level shifters.
Propagation delays are balanced between rising and falling edges (tPLH/tPHL), and output drive strength remains symmetrical (±24 mA) across the full 1.65–5.5 V VCC range and −55°C to +125°C operating temperature.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCC Range | 1.65 V to 5.5 V - supports direct interface with 1.8 V, 2.5 V, 3.3 V, and 5 V logic domains |
| tPD (Typ) | 2.4 ns @ VCC = 5.0 V - enables high-speed signal routing in timing-critical paths |
| Output Drive | ±24 mA - sufficient to drive multiple standard CMOS loads or low-impedance traces |
| Input Voltage Range | −0.5 V to +7.0 V - allows safe connection to signals exceeding VCC, eliminating external clamping diodes |
| ICC (Max) | 1 µA @ TA = 25°C - ultra-low quiescent current for battery-powered systems |
| Operating Temp | −55°C to +125°C - qualified for automotive under-hood and industrial control environments |
Pinout & Package
Package: UDFN6 (1.45 × 1.0 mm, 0.5 mm pitch), Pb-free, moisture sensitivity level 1, exposed thermal pad.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Input A | First OR operand; overvoltage tolerant (−0.5 V to +7.0 V) |
| 2 | Input B | Second OR operand; electrically identical to Pin 1 |
| 3 | GND | Ground reference for logic and power; connects to exposed thermal pad |
| 4 | VCC | Positive supply; decoupling capacitor required within 2 mm |
| 5 | Output Y | OR result (A + B + C); rail-to-rail swing with ±24 mA drive |
| 6 | Input C | Third OR operand; matches electrical specs of Pins 1 and 2 |
Key Features
| Feature | Design Value |
|---|---|
| Overvoltage-tolerant inputs | Supports 7.0 V input signals regardless of VCC (1.65–5.5 V), reducing need for external protection |
| Balanced output drive | 24 mA sink and source capability ensures consistent rise/fall times and noise margin across load variations |
| Ultra-small UDFN6 footprint | 1.45 × 1.0 mm area saves >60% board space vs. SOT-23-6, critical for wearables and IoT sensors |
| Wide temperature operation | Functional across −55°C to +125°C, meeting AEC-Q100 Grade 1 stress requirements for automotive modules |
Applications
| Industrial Sensor Interface | Portable Power Management |
|---|---|
Use Scenario: Combining fault signals from three independent temperature, voltage, and current monitors in a motor driver PCB. IC Role / Device Role / Timing Role: Single-gate OR logic aggregator that asserts a system-wide fault flag when any sensor exceeds threshold. Use Value: Eliminates need for discrete diode-OR or larger logic ICs; overvoltage tolerance allows direct connection to 5 V sensor outputs while powered from 3.3 V rail. | Use Scenario: Enabling a backup power path in a Bluetooth headset by OR-ing battery OK, USB OK, and wireless charging OK signals. IC Role / Device Role / Timing Role: Low-power combiner ensuring system stays active if any power source is valid. Use Value: 1 µA max ICC extends standby time; 1.65 V minimum VCC supports operation down to deeply discharged Li-ion cells (~2.8 V). |
| Automotive Body Control Module | Medical Wearable Alert System |
Use Scenario: Merging door-open, trunk-open, and hood-open status signals for cabin lighting activation in a BCM. IC Role / Device Role / Timing Role: Fast-response logic element triggering illumination within <5 ns of any input assertion. Use Value: 2.4 ns tPD ensures immediate visual feedback; −55°C to +125°C rating covers full vehicle thermal envelope. | Use Scenario: Detecting simultaneous low-battery, out-of-range SpO₂, and motion-loss conditions in a pulse oximeter wristband. IC Role / Device Role / Timing Role: Final-stage alert trigger that activates vibration motor only when all three critical conditions occur. Use Value: UDFN6 size fits tight wearable form factor; Pb-free and biocompatible packaging meets ISO 10993-1 requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 3-input OR gate applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SN74LVC1G332DBVR | Same 3-input OR function; 1.65–5.5 V VCC; but no overvoltage tolerance (max VIN = VCC + 0.5 V) | Requires external clamping for mixed-voltage interfaces; unsuitable where 5 V signals connect to 1.8 V–powered systems | Select when all connected signals stay within VCC ±0.5 V and cost is primary constraint |
| MC74VHC1G332DTT1G | Higher ICC (max 2 µA); same VCC range; overvoltage tolerant to 7 V, but slower tPD (4.5 ns typ @ 5 V) | Acceptable where propagation delay >4 ns is tolerable; wider availability in legacy designs | Select when board layout already uses 1.0 × 1.0 mm DFN and timing budget allows 2 ns margin |
Compared with SN74LVC1G332DBVR and MC74VHC1G332DTT1G, the NLX1G332AMX1TCG delivers the fastest propagation delay (2.4 ns), lowest quiescent current (1 µA), and maintains overvoltage tolerance without sacrificing speed - making it optimal for next-gen compact, multi-rail systems requiring robust signal aggregation.
Availability
NLX1G332AMX1TCG is available at Aetrix Electronics and suitable for industrial sensor interface, portable power management, and automotive body control modules requiring stable component supply, long-term lifecycle support, and RoHS-compliant packaging.
Supply support for NLX1G332AMX1TCG includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
onsemi (formerly ON Semiconductor) is a global semiconductor supplier delivering energy-efficient, intelligent power and sensing solutions for automotive, industrial, cloud, medical, and IoT applications.
The NLX1G332AMX1TCG belongs to the MiniGate™ family of ultra-small logic devices, designed specifically for space-constrained, multi-voltage digital systems requiring robust signal conditioning without external protection components.
FAQ
What is the maximum input voltage the NLX1G332AMX1TCG can tolerate?
The NLX1G332AMX1TCG supports DC input voltages from −0.5 V to +7.0 V on all inputs (A, B, C), independent of VCC. This overvoltage tolerance allows safe interfacing with higher-voltage signals-such as 5 V microcontroller GPIOs-even when the device is powered from 1.8 V or 2.5 V, eliminating the need for external clamping diodes or level shifters in mixed-supply systems.
Does the NLX1G332AMX1TCG require external pull-up or pull-down resistors on unused inputs?
No, unused inputs must not be left floating but should be tied directly to VCC or GND-no external resistors are needed. The NLX1G332AMX1TCG's input structure has no internal pull-up or pull-down; however, its overvoltage-tolerant design permits direct connection to supply rails without risk of latch-up or excessive current draw, simplifying PCB layout and reducing BOM count.
What is the thermal performance of the NLX1G332AMX1TCG in its UDFN6 package?
The NLX1G332AMX1TCG in UDFN6 (Case 517AQ) has a junction-to-ambient thermal resistance (θJA) of 496°C/W under standard FR4 test conditions (10 mm × 1 inch, 2 oz copper, no airflow). Its maximum junction temperature is 150°C, and it delivers 252 mW power dissipation at 85°C ambient-enabling reliable operation in thermally dense layouts when the exposed thermal pad is properly soldered to a PCB ground plane.
Can the NLX1G332AMX1TCG operate at 1.65 V while driving a 15 pF load?
Yes, the NLX1G332AMX1TCG is fully specified down to 1.65 V VCC with a 15 pF capacitive load. At this condition, tPLH/tPHL is 18.5 ns (max) and output swing remains rail-to-rail (VOH ≥ VCC − 0.1 V, VOL ≤ 0.1 V), ensuring robust noise margins and timing predictability in low-voltage IoT edge nodes where power efficiency and signal integrity are both critical.
Is the NLX1G332AMX1TCG pin-compatible with other MiniGate™ 3-input OR gates?
The NLX1G332AMX1TCG shares identical pinout (A-B-GND-VCC-Y-C) and UDFN6 footprint with NLX1G332MUTCG (1.2 × 1.0 mm) and NLX1G332CMUTCG (1.0 × 1.0 mm), but physical dimensions differ. While electrical behavior is identical, mechanical fit requires matching the specific case code (517AQ for NLX1G332AMX1TCG); PCB land patterns must be verified per each variant's mounting footprint diagram.
NLX1G332AMX1TCG Specifications
- Product attributes
- Attribute value
- Manufacturer:
- onsemi
- Series:
- -
- Package/Case:
- 6-XFLGA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Logic Type:
- OR Gate
- Number of Circuits:
- 1
- Number of Inputs:
- 3
- Features:
- -
- Voltage - Supply:
- 1.65V ~ 5.5V
- Current - Quiescent (Max):
- 1 µA
- Current - Output High, Low:
- 32mA, 32mA
- Input Logic Level - Low:
- -
- Input Logic Level - High:
- -
- Max Propagation Delay @ V, Max CL:
- 7ns @ 5V, 50pF
- Operating Temperature:
- -55°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-ULLGA (1.45x1)
NLX1G332AMX1TCG FAQ
1.How can I place an order for NLX1G332AMX1TCG through Aetrix?
Please submit a Request for Quotation (RFQ) for NLX1G332AMX1TCG on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for NLX1G332AMX1TCG reliable?
The price and inventory of NLX1G332AMX1TCG are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for NLX1G332AMX1TCG is usually 5 days.
3.What payment methods are accepted for NLX1G332AMX1TCG?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for NLX1G332AMX1TCG transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for NLX1G332AMX1TCG?
NLX1G332AMX1TCG orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your NLX1G332AMX1TCG order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for NLX1G332AMX1TCG?
For technical support, including NLX1G332AMX1TCG datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your NLX1G332AMX1TCG requirements.
6.How does Aetrix verify that NLX1G332AMX1TCG is sourced from the original manufacturer or authorized distributors?
All NLX1G332AMX1TCG products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that NLX1G332AMX1TCG meets industry standards.
7.What is the process for return or replacement of NLX1G332AMX1TCG?
All NLX1G332AMX1TCG units undergo pre-shipment inspection (PSI). If there is an issue with NLX1G332AMX1TCG, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The NLX1G332AMX1TCG part is unused and in its original packaging.
Return procedure for NLX1G332AMX1TCG:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
NLX1G332AMX1TCG Tags
-
SN74LVC1G14DBVR
Texas Instruments
-
SN74LVC1G14DCKR
Texas Instruments
-
SN74AHC1G14DBVR
Texas Instruments
-
SN74LVC1G08DBVR
Texas Instruments
-
SN74LVC1G08DCKR
Texas Instruments
-
SN74LVC1G32DCKR
Texas Instruments
-
SN74LVC1G04DBVR
Texas Instruments
.jpg)
-
74LVC1G08GW,125
Nexperia USA Inc.
-
SN74LVC1G04DCKR
Texas Instruments
-
SN74AHC1G08DBVR
Texas Instruments
-
SN74LVC1G32DBVR
Texas Instruments
-
SN74AHCT1G08DBVR
Texas Instruments
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
