My Inquiry
My Account
Nexperia USA Inc. NXB0108BQ-Q100X
- Part No.:
- NXB0108BQ-Q100X
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Translators, Level Shifters
- Package:
- Datasheet:
-
NXB0108BQ-Q100X.pdf
- Description:
- IC TRANSLATOR BIDIR 20DHVQFN
- Quantity:
- Payment:
- Shipping:
Inventory:1,950
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
NXB0108BQ-Q100 from Nexperia is an 8-bit dual-supply auto-sensing bidirectional voltage-level translating transceiver in DHVQFN20 package, supporting VCC(A) = 1.2–3.6 V and VCC(B) = 1.65–5.5 V, with IOFF partial power-down protection and AEC-Q100 Grade 1 qualification for automotive infotainment and ADAS domain controllers.
For engineers reviewing the NXB0108BQ-Q100 datasheet, NXB0108BQ-Q100 pinout, NXB0108BQ-Q100 application, or NXB0108BQ-Q100 equivalent, key selection criteria include asymmetric supply range compatibility, 3-state control via OE referenced to VCC(A), auto-direction sensing without external control logic, and thermal-enhanced DHVQFN package with side-wettable flanks for AOI-capable solder joint inspection.
Technical Context
The device implements edge-triggered one-shot circuitry on both A and B ports to dynamically enable PMOS/NMOS output drivers during signal transitions-accelerating rise/fall times without requiring direction-control pins. Its weak static drive strength (70 Ω typical at 1.2–1.8 V, 40 Ω at 3.3–5.0 V) enables bus contention resolution while maintaining defined output levels in idle states.
IOFF circuitry actively disables outputs when either VCC(A) or VCC(B) is at GND, limiting backflow current to ±2 μA across −40 °C to +125 °C. Input thresholds scale with respective supply rails (VIH = 0.65×VCCI, VIL = 0.35×VCCI), ensuring robust noise margins across mixed-voltage interfaces.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCC(A) Range | 1.2 V to 3.6 V - powers A-side I/Os and OE; must be ≤ VCC(B) during operation |
| VCC(B) Range | 1.65 V to 5.5 V - powers B-side I/Os; supports translation to 5 V legacy systems |
| Propagation Delay | 0.8–11.9 ns - varies by supply pair and temperature; min 0.8 ns (A→B, 3.3 V/5.0 V, −40 °C to +125 °C) |
| Data Rate | Up to 110 Mbps - achievable at VCC(A)=3.3 V/VCC(B)=5.0 V within −40 °C to +125 °C |
| IOFF Leakage | ±2 μA max - prevents damaging backflow when one supply is powered down |
| ESD Robustness | HBM 15 kV (B port), 2.5 kV (A port); CDM 1.5 kV - meets automotive system-level ESD requirements |
| Operating Temp | −40 °C to +125 °C - qualified per AEC-Q100 Grade 1 for under-hood and cockpit electronics |
Pinout & Package
DHVQFN20 package (SOT764-1), 2.5 × 4.5 × 0.85 mm body, side-wettable flanks for automated optical inspection of solder joints; thermal pad (GND(1)) is electrically isolated unless explicitly connected to system ground.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| A1–A8 | A-side data I/O | Bidirectional signals referenced to VCC(A); auto-sensed direction; tolerate up to 5.5 V input |
| B1–B8 | B-side data I/O | Bidirectional signals referenced to VCC(B); driven by internal one-shots during transitions |
| OE | Output enable | Active-HIGH control referenced to VCC(A); forces all I/Os into high-impedance state when LOW |
| VCC(A) | A-port supply | Provides power for A-side logic, OE input, and A-port drivers; must be ≤ VCC(B) in active mode |
| VCC(B) | B-port supply | Provides power for B-side logic and drivers; supports 5 V legacy interface compatibility |
| GND | Ground reference | Common return path for both supplies; thermal pad (terminal 1) is non-functional unless grounded |
Key Features
| Feature | Design Value |
|---|---|
| Auto-direction sensing | Eliminates need for external direction-control signals by detecting edge transitions on either port |
| Asymmetric dual-supply operation | Enables translation between 1.2 V microcontrollers and 5.0 V sensors or displays without level-shifter ICs |
| IOFF partial power-down | Prevents back-current flow when either supply is off, protecting upstream/downstream devices |
| Side-wettable flanks | Enables automated optical inspection of solder joints in automotive PCB assembly lines |
| AEC-Q100 Grade 1 | Qualified for operation from −40 °C to +125 °C ambient, meeting automotive reliability standards |
Applications
| Infotainment Head Unit Interface | ADAS Camera Sensor Link |
|---|---|
Use Scenario: Connecting a 1.8 V SoC processor to a 3.3 V display timing controller in automotive head units. IC Role / Device Role / Timing Role: Bidirectional voltage translator enabling pixel clock, HSYNC, VSYNC, and RGB data transfer across supply domains. Use Value: Eliminates discrete resistor-based level shifters and reduces BOM count while maintaining <12 ns propagation delay for 60 Hz video timing. | Use Scenario: Interfacing a 2.5 V image signal processor with a 5.0 V MIPI CSI-2 serializer in surround-view camera modules. IC Role / Device Role / Timing Role: Translates parallel control signals (I²C, reset, power enable) between domains with auto-direction detection. Use Value: Supports 110 Mbps data rate at 3.3 V/5.0 V supply pair, meeting MIPI D-PHY v1.2 control channel timing budgets. |
| Body Control Module Gateway | Electric Power Steering (EPS) MCU Link |
Use Scenario: Bridging 3.3 V CAN transceiver logic with 1.2 V low-power microcontroller in vehicle gateway ECUs. IC Role / Device Role / Timing Role: Translates GPIO, interrupt, and configuration signals while maintaining IOFF isolation during sleep mode. Use Value: Enables zero-power leakage (<2 μA) during MCU deep-sleep, extending battery standby time in always-on gateways. | Use Scenario: Connecting a 1.5 V safety-critical EPS MCU to 5.0 V motor driver status feedback lines. IC Role / Device Role / Timing Role: Provides fault-status signal translation with AEC-Q100 Grade 1 qualification and 15 kV HBM ESD protection on B port. Use Value: Meets ISO 26262 ASIL-B functional safety requirements for diagnostic signal integrity in steering control paths. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar bidirectional voltage translation applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NXB0108PW-Q100 | TSSOP20 package (SOT360-1); no side-wettable flanks; higher thermal resistance (10.0 mW/K derating above 100 °C) | Suitable for prototyping or low-volume manual assembly; lacks AOI support for high-reliability automotive SMT lines | Select when board space allows larger footprint and AOI is not required. |
| NXS0108BQ-Q100 | Open-drain architecture with pull-up resistors; supports I²C and 1-Wire protocols; no auto-direction sensing | Required for true bidirectional open-drain buses; cannot replace NXB0108 in push-pull applications | Choose only for I²C/SMBus interfaces where bus arbitration and clock stretching are needed. |
Compared with NXB0108PW-Q100, the BQ variant offers superior thermal performance and AOI-compatible packaging for automated production; versus NXS0108BQ-Q100, it delivers faster push-pull signaling but lacks native I²C compatibility-making it optimal for high-speed parallel control links in AEC-Q100 systems.
Availability
NXB0108BQ-Q100 is available at Aetrix Electronics and suitable for automotive infotainment head units, ADAS camera sensor links, and body control module gateways requiring stable component supply with AEC-Q100 compliance and extended temperature operation.
Supply support for NXB0108BQ-Q100 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert delivering high-performance, reliable components for automotive, industrial, and consumer markets, with leadership in logic, power MOSFETs, and analog devices.
The NXB0108-Q100 product line targets automotive-grade bidirectional voltage translation in domain controller and sensor interface applications, emphasizing robustness, mixed-supply flexibility, and automated manufacturing readiness.
FAQ
What is the maximum allowable voltage difference between VCC(A) and VCC(B)?
VCC(A) must never exceed VCC(B) during normal operation per datasheet Section 8, though transient overvoltage during power-up is tolerated. The absolute maximum rating allows VCC(A) up to +6.5 V and VCC(B) up to +6.5 V independently, but functional operation requires VCC(A) ≤ VCC(B) to prevent latch-up and ensure correct auto-direction sensing behavior.
Can NXB0108BQ-Q100 translate between 1.2 V and 5.0 V without external components?
Yes-NXB0108BQ-Q100 supports direct 1.2 V ↔ 5.0 V translation with VCC(A) = 1.2 V and VCC(B) = 5.0 V. Inputs on both sides accept up to 5.5 V, and the IOFF circuit ensures safe isolation during power sequencing. No pull-up resistors or direction-control logic are required due to its auto-sensing architecture.
Is the thermal pad (GND(1)) required to be soldered and connected to ground?
No-the thermal pad (terminal 1) has no electrical function per datasheet footnote (1). It may remain floating or be connected to GND if thermal performance demands it, but soldering is optional and grounding is not mandatory for electrical operation or AEC-Q100 compliance.
Does NXB0108BQ-Q100 support hot insertion or live swapping of supply rails?
It supports controlled hot insertion: either VCC(A) or VCC(B) may be ramped first during power-up without damage, and IOFF activation ensures outputs enter high-impedance state within microseconds if one rail collapses. However, sustained operation with VCC(A) > VCC(B) is prohibited and may cause undefined behavior or increased leakage.
NXB0108BQ-Q100X Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Translator Type:
- Voltage Level
- Channel Type:
- Bidirectional
- Number of Circuits:
- 1
- Channels per Circuit:
- 8
- Voltage - VCCA:
- 1.2 V ~ 3.6 V
- Voltage - VCCB:
- 1.65 V ~ 5.5 V
- Input Signal:
- -
- Output Signal:
- -
- Output Type:
- Tri-State
- Data Rate:
- 110Mbps
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Features:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 20-VFQFN Exposed Pad
NXB0108BQ-Q100X FAQ
1.How can I place an order for NXB0108BQ-Q100X through Aetrix?
Please submit a Request for Quotation (RFQ) for NXB0108BQ-Q100X on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for NXB0108BQ-Q100X reliable?
The price and inventory of NXB0108BQ-Q100X are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for NXB0108BQ-Q100X is usually 5 days.
3.What payment methods are accepted for NXB0108BQ-Q100X?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for NXB0108BQ-Q100X transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for NXB0108BQ-Q100X?
NXB0108BQ-Q100X orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your NXB0108BQ-Q100X order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for NXB0108BQ-Q100X?
For technical support, including NXB0108BQ-Q100X datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your NXB0108BQ-Q100X requirements.
6.How does Aetrix verify that NXB0108BQ-Q100X is sourced from the original manufacturer or authorized distributors?
All NXB0108BQ-Q100X products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that NXB0108BQ-Q100X meets industry standards.
7.What is the process for return or replacement of NXB0108BQ-Q100X?
All NXB0108BQ-Q100X units undergo pre-shipment inspection (PSI). If there is an issue with NXB0108BQ-Q100X, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The NXB0108BQ-Q100X part is unused and in its original packaging.
Return procedure for NXB0108BQ-Q100X:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
NXB0108BQ-Q100X Tags
-
74LVC1T45GW,125
Nexperia USA Inc.
-
74LVCH2T45DC,125
Nexperia USA Inc.
-
SN74LVC1T45DBVR
Texas Instruments
-
SN74LVC1T45DRLR
Texas Instruments
-
SN74LVC1T45DPKR
Texas Instruments
-
SN74LVC2T45DCTR
Texas Instruments
-
74LVC2T45GT,115
Nexperia USA Inc.
-
SN74LVC1T45YZPR
Texas Instruments
-
LSF0102DCUR
Texas Instruments
-
SN74LVC1T45DCKR
Texas Instruments
-
TXS0102DCTR
Texas Instruments
-
FXLP34P5X
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
