NXP Semiconductors P1010NXE5HFA

Overview

P1010NXE5HFA from NXP Semiconductors (formerly Freescale) is a single-core Power Architecture® e500-v2 communications processor targeting cost-sensitive networking and industrial control applications. It delivers 1000 MHz core frequency, 256 KB L2 cache with ECC, integrated security engine (SEC 4.0), triple 1 GbE controllers, dual SATA, dual PCIe, and dual FlexCAN interfaces - deployed in wireless LAN access points and network-attached storage systems.

For engineers reviewing the P1010NXE5HFA datasheet, P1010NXE5HFA pinout, P1010NXE5HFA application, or P1010NXE5HFA equivalent, key selection factors include its 425-pin TEPBGA1 package, DDR3/DDR3L memory controller support, IEEE 1588 timing capability, secure boot via one-time-programmable fuses, and single-pass cryptographic acceleration for IPsec, SSL/TLS, and IEEE 802.11i.

Technical Context

The P1010NXE5HFA implements a coherent system bus architecture with a 36-bit physical address space and double-precision floating-point support. Its e500-v2 core integrates 32 KB instruction and 32 KB data L1 caches, while the 256 KB L2 cache supports ECC, SRAM configuration, and stashing modes for optimized I/O coherency.

Security is enforced through hardware-rooted trusted boot using OTP fuses and a dedicated SEC 4.0 coprocessor featuring PKHA, AESA, DESA, MDHA, RNG, and CRCA units. The processor supports single-pass multi-algorithm operations (e.g., AES-CBC + HMAC-SHA1) and includes XOR acceleration for RAID parity.

Key Specifications

Pinout & Package

Package: 425-pin TEPBGA1 (0.8 mm pitch, 19 mm × 19 mm), RoHS-compliant, lead-free, thermal pad exposed on underside.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar communications processor applications.

Compared with MPC8536E and LS1023A, the P1010NXE5HFA uniquely balances Power Architecture® real-time determinism, dual FlexCAN for industrial fieldbus, IEEE 1588 across three GbE ports, and SEC 4.0 single-pass crypto - making it optimal for cost-constrained, security-aware edge networking where CAN and precise timing are mandatory.

Availability

P1010NXE5HFA is available at Aetrix Electronics and suitable for wireless LAN access points, network-attached storage systems, and industrial Ethernet controllers requiring stable component supply across extended product lifecycles.

Supply support for P1010NXE5HFA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

NXP Semiconductors is a global semiconductor leader focused on secure connectivity solutions for automotive, industrial, and IoT markets, with deep heritage in Power Architecture® and communications processors.

The QorIQ P1010 series was designed specifically for cost-optimized, low-power communications infrastructure - delivering integrated security, multi-protocol networking, and industrial I/O in a single die for SOHO routers, NAS, and factory automation gateways.

FAQ

What is the maximum DDR3 data rate supported by the P1010NXE5HFA?

The P1010NXE5HFA supports DDR3/DDR3L memory at up to 800 MHz data rate (400 MHz clock), with 16-bit or 32-bit bus width and full ECC capability. This enables sustained bandwidth of ~6.4 GB/s in 32-bit mode, sufficient for concurrent 1 GbE packet buffering and application execution. The memory controller includes programmable timing registers to accommodate diverse DDR3 module specifications.

Does the P1010NXE5HFA include hardware support for IEEE 1588 Precision Time Protocol?

Yes, the P1010NXE5HFA includes IEEE 1588 hardware timestamping support across all three eTSEC controllers. Each eTSEC provides dedicated timestamp registers, fine-resolution nanosecond counters, and event-triggered capture for Sync, Delay_Req, and Pdelay_Req frames - enabling sub-microsecond time synchronization essential for industrial automation and video surveillance NVRs.

How many FlexCAN controllers does the P1010NXE5HFA integrate, and what version do they implement?

The P1010NXE5HFA integrates two FlexCAN controllers compliant with revision 2.0B of the CAN specification. Each supports bit rates up to 1 Mb/s, 64 configurable message buffers, Rx FIFO with six-frame depth, ID filtering, and 16-bit free-running timer-based timestamping - meeting requirements for deterministic CANopen and DeviceNet implementations in factory automation.

What cryptographic algorithms are accelerated by the SEC 4.0 engine in the P1010NXE5HFA?

The SEC 4.0 engine in the P1010NXE5HFA accelerates AES (128/192/256), DES/3DES, RSA/ECC (up to 4096-bit), MD5, SHA-1/SHA-224/SHA-256, ARC4, Snow 3G, Kasumi, and CRC-32. It supports single-pass combinations like AES-CBC + HMAC-SHA1 and performs deterministic random number generation compliant with FIPS 140-2.

Is the P1010NXE5HFA pin-compatible with other QorIQ P101x devices such as the P1014?

No, the P1010NXE5HFA is not pin-compatible with the P1014. While both use the same 425-pin TEPBGA1 package, the P1014 omits the third eTSEC, SATA0, and FlexCAN1 signals, and has different power domain assignments and DDR3 width constraints (16-bit only). PCB layout must be specific to the P1010NXE5HFA's full I/O set.