STMicroelectronics PD20010STR-E

Overview

PD20010STR-E from STMicroelectronics is an RF power LDMOS transistor. In RF designs, package parasitics, matching networks, gain, bias class, and thermal path are part of the usable component, not secondary details.

In BOM review, PD20010STR-E should be matched against VHF and UHF RF amplifiers, industrial RF drivers, communication transmitters, replacement RF power stages, plus package marking, lifecycle status, and the electrical details that make this exact orderable part useful.

Technical Context

PD20010STR-E is an RF power transistor, so gain, output power, bias stability, impedance matching, and heat spreading determine circuit success.

RF replacements must preserve package parasitics, matching network assumptions, frequency band, bias class, thermal path, and stability margin rather than only voltage and power rating.

Key Specifications

Pinout & Package

PD20010STR-E uses PowerSO / surface-mount RF package. Pin mapping, polarity, or item format should be matched to the exact board, fixture, or procurement requirement before replacement.

Key Features

• PD20010STR-E is identified as a RF power LDMOS transistor.
• RF supply voltage class set by amplifier design voltage or operating class for the relevant circuit stress.
• RF output-power dependent current current or output class, subject to package and thermal derating.
• PowerSO / surface-mount RF package package or item format for procurement and assembly review.
• RF power amplification
• matched bias and thermal design required
• linearity and gain review

Applications

Equivalent & Alternatives

When evaluating PD20010STR-E equivalent devices, compare voltage rating or operating class, current or output capability, package and footprint, pin mapping or polarity, thermal behavior, qualification suffix, lifecycle and sourcing status. A similar family name is not enough when the board depends on timing, leakage, firmware, optical output, or protection behavior.

Quality

PD20010STR-E should be sourced as original STMicroelectronics material through traceable and controlled supply channels. Quality verification may include package inspection, marking verification, polarity or pinout review, solderability testing, leakage or continuity checks, and reel label verification, along with incoming inspection suited to RF power LDMOS transistor production, repair, or lifecycle procurement.

Availability

PD20010STR-E is available at Aetrix Electronics and suitable for VHF and UHF RF amplifiers, industrial RF drivers, communication transmitters, replacement RF power stages requiring PowerSO / surface-mount RF package in a controlled BOM or repair program.

Supply support may include scheduled delivery planning, volume procurement support, BOM continuity assistance, traceable sourcing management, and lifecycle availability coordination for manufacturers, repair teams, contract manufacturers, and engineering buyers managing RF power LDMOS transistor demand.

For production deployment, confirming package fit, pin mapping or polarity, electrical rating, temperature margin, lifecycle status, approved manufacturer identity, and sourcing continuity helps reduce qualification risk for PD20010STR-E.

Manufacturer

STMicroelectronics supplies power MOSFETs, RF power devices, analog ICs, microcontrollers, sensors, and power-management products for industrial, automotive, consumer, and communication systems. PD20010STR-E belongs to ST's discrete or RF power semiconductor portfolio.

FAQ

What is PD20010STR-E used for?

PD20010STR-E is used for VHF and UHF RF amplifiers, industrial RF drivers, communication transmitters. In those circuits, PD20010STR-E provides the RF power LDMOS transistor function with PowerSO / surface-mount RF package. The final selection should match the schematic role, operating stress, package footprint, and sourcing requirements.

What package or format does PD20010STR-E use?

PD20010STR-E uses PowerSO / surface-mount RF package. This package or item format affects footprint, soldering, thermal behavior, polarity or pin mapping, and incoming inspection. When replacing PD20010STR-E, the package code should be checked as carefully as the headline electrical rating.

What are the key design checks for PD20010STR-E?

Key design checks for PD20010STR-E include voltage margin, current or output load, temperature rise, pinout or polarity, package fit, lifecycle status. These checks help prevent a visually similar part from changing circuit behavior or assembly reliability.

Can PD20010STR-E be replaced by a similar part?

PD20010STR-E can be compared with similar family members only after electrical limits, package, orientation, qualification suffix, timing or leakage behavior, and approved-source rules are reviewed. A similar name alone is not enough because PD20010STR-E may carry package, program, bin, or lifecycle details.

Why source PD20010STR-E through Aetrix Electronics?

Sourcing PD20010STR-E through Aetrix Electronics supports traceable procurement, scheduled delivery planning, BOM continuity assistance, and lifecycle availability coordination. This is useful when PD20010STR-E is needed for production builds, repair lots, controlled alternates, or long-running equipment support.