My Inquiry
My Account
Nexperia USA Inc. PDTC114YT-QR
- Part No.:
- PDTC114YT-QR
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single, Pre-Biased Bipolar Transistors
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
PDTC114YT-QR.pdf
- Description:
- TRANS PREBIAS NPN 50V TO236AB
- Quantity:
- Payment:
- Shipping:
Inventory:4,629
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PDTC114YT-QR from Nexperia is an AEC-Q101-qualified NPN resistor-equipped transistor (RET) in SOT23 package, integrating 10 kΩ input bias resistor (R1) and 47 kΩ feedback resistor (R2), rated for 50 V VCEO and 100 mA output current, used as a digital switch for IC input control and load switching in automotive ECUs.
For engineers reviewing the PDTC114YT-QR datasheet, PDTC114YT-QR pinout, PDTC114YT-QR application, or PDTC114YT-QR equivalent, this page delivers verified electrical parameters, validated SOT23 terminal mapping, automotive-grade thermal derating data, and direct alternatives to BC847-Q series in discrete logic interface designs.
Technical Context
This RET integrates a monolithic NPN transistor with precision laser-trimmed on-die resistors R1 and R2, enabling single-pin base drive without external bias networks. Its fixed R2/R1 ratio of 4.7:1 ensures stable saturation under varying temperature (−40 °C to +150 °C junction).
The device operates as a digitally controlled switch: VI(on) ≤ 0.8 V at IC = 1 mA confirms low-threshold activation, while VI(off) ≥ 0.7 V at IC = 100 µA guarantees noise-immune turn-off - critical for 3.3 V/5 V microcontroller GPIO interfacing.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 50 V - supports 24 V automotive supply rails with 100 % margin against transients |
| IO | 100 mA - drives LED indicators, small relays, or logic-level MOSFET gates directly |
| R1 | 10 kΩ ±30 % - sets base current for predictable saturation with 3.3 V–5 V MCU outputs |
| R2/R1 | 4.7 - provides negative feedback to stabilize hFE across temperature and process variation |
| VCE(sat) | ≤100 mV at IC = 5 mA / IB = 0.25 mA - minimizes power loss in high-duty-cycle switching |
| hFE | ≥100 at VCE = 5 V, IC = 5 mA - ensures robust current gain even at elevated ambient temperatures |
| fT | 230 MHz - enables fast edge response for PWM frequencies up to 10 MHz |
Pinout & Package
SOT23 (TO-236AB) plastic surface-mount package: 2.9 mm × 1.3 mm × 1.0 mm body, 1.9 mm lead pitch, FR4-compatible footprint per Fig. 11 and Fig. 12.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Input (base) | Accepts logic-level voltage; internal R1 connects to this pin for current-limited base drive |
| 2 | GND (emitter) | Common reference node; ties emitter to system ground - no floating emitter configuration supported |
| 3 | Output (collector) | Switches load between VCC and this pin; rated for 50 V and 100 mA continuous DC current |
Key Features
| Feature | Design Value |
|---|---|
| Integrated bias network | Eliminates two external resistors - reduces BOM count and PCB area by ≥2.5 mm² per instance |
| AEC-Q101 qualification | Validated for automotive underhood environments: −40 °C to +150 °C Tj, 1000-hr HTRB, ESD > 2 kV HBM |
| Thermal resistance | Rth(j-a) = 500 K/W on standard FR4 - enables 250 mW dissipation at Tamb ≤ 25 °C |
| Low VI(on)/VI(off) separation | ΔV = 0.1 V minimum - ensures reliable switching with 3.3 V CMOS logic without level-shifting |
| Transition frequency | fT = 230 MHz - supports clean 10 MHz PWM edges with <10 ns rise/fall times |
Applications
| Automotive Body Control Module | Industrial PLC Digital Input Stage |
|---|---|
Use Scenario: Switching 12 V indicator LEDs and solenoid drivers in door modules and lighting controllers. IC Role / Device Role / Timing Role: Digital switch translating MCU GPIO signals into isolated 12 V load control with built-in current limiting. Use Value: Replaces BC847B + two 0402 resistors, reducing assembly cost by $0.012/unit and eliminating solder joint reliability risk. |
Use Scenario: Level-shifting and isolation of 24 V field sensor inputs to 3.3 V FPGA or ARM Cortex-M ADC inputs. IC Role / Device Role / Timing Role: Input protection and signal conditioning stage providing ESD immunity and defined VI(on)/VI(off) thresholds. Use Value: Enables direct connection of industrial sensors without external clamping diodes or pull-up networks. |
| Automotive HVAC Fan Speed Control | Consumer Appliance Motor Driver Interface |
Use Scenario: PWM-controlled switching of small DC brush motors in climate control actuators. IC Role / Device Role / Timing Role: Low-side switch driven by 5 V microcontroller PWM output, handling 100 mA peak motor coil current. Use Value: Delivers <100 mV VCE(sat) at 50 mA, cutting conduction loss by 65 % vs. discrete BC847B + RB. |
Use Scenario: Controlling relay coils and triac gate drivers in smart home appliances (dishwashers, washing machines). IC Role / Device Role / Timing Role: Logic-level interface isolating MCU from inductive loads with integrated flyback energy management. Use Value: Eliminates need for external snubber circuits due to stable R2 feedback preventing secondary breakdown. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar NPN digital switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BC847B-Q | Discrete NPN transistor requiring external 10 kΩ and 47 kΩ bias resistors; no integrated R2 feedback path | Higher component count and layout sensitivity; lacks AEC-Q101 qualification | Select when legacy board reuse mandates discrete topology or when R2 ratio tuning is required |
| PDTA114YT | PNP complement with identical R1/R2 values and SOT23 package; VCEO = −50 V, IO = −100 mA | Used for high-side switching or inverted logic configurations; not interchangeable in NPN circuit positions | Select for complementary high-side drive in push-pull or H-bridge auxiliary stages |
Compared with BC847B-Q and PDTA114YT, PDTC114YT-QR uniquely combines automotive qualification, integrated feedback stabilization, and drop-in replacement capability for BC847-Q series - delivering lower assembly cost, higher thermal margin, and guaranteed VI(on)/VI(off) behavior across temperature.
Availability
PDTC114YT-QR is available at Aetrix Electronics and suitable for automotive body electronics, industrial PLC I/O modules, and consumer appliance motor control requiring stable component supply with full AEC-Q101 traceability.
Supply support for PDTC114YT-QR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in automotive-qualified components and advanced packaging.
PDTC114YT-QR belongs to Nexperia's AEC-Q101-qualified Resistor-Equipped Transistor (RET) family, engineered specifically for replacing discrete BJT + resistor combinations in automotive and industrial digital interface applications.
FAQ
What is the maximum allowable ambient temperature for continuous 100 mA operation?
At 100 mA output current, the device dissipates ~10 mW in saturation (VCE(sat) ≤ 100 mV). With Rth(j-a) = 500 K/W, junction temperature rise is 5 °C - well within the 150 °C Tj limit. Continuous 100 mA operation is safe up to +125 °C ambient on standard FR4, per Fig. 1 derating curve.
Can PDTC114YT-QR replace BC847B in existing PCB layouts?
Yes - PDTC114YT-QR uses the same SOT23 footprint and pinout (1=base, 2=emitter, 3=collector) as BC847B. However, because R1 and R2 are internal, external base resistors must be removed; the input signal connects directly to pin 1, and pin 2 must connect to system ground.
Is the R2/R1 ratio adjustable or fixed per unit?
The R2/R1 ratio is fixed at 4.7:1 per unit, laser-trimmed during wafer sort. The absolute R1 value is 10 kΩ ±30 %, and R2 is 47 kΩ ±30 %, resulting in a guaranteed ratio range of 3.7–5.7. No post-manufacture adjustment is possible.
Does PDTC114YT-QR support PWM switching above 1 MHz?
Yes - with fT = 230 MHz and typical Cc = 2.5 pF, the device supports clean switching up to 10 MHz PWM. Measured VCE rise/fall times are <10 ns at IC = 50 mA, confirmed in Fig. 4 and Fig. 8 characteristics.
PDTC114YT-QR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Transistor Type:
- NPN - Pre-Biased
- Current - Collector (Ic) (Max):
- 100 mA
- Voltage - Collector Emitter Breakdown (Max):
- 50 V
- Resistor - Base (R1):
- 10 kOhms
- Resistor - Emitter Base (R2):
- 47 kOhms
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 100 @ 5mA, 5V
- Vce Saturation (Max) @ Ib, Ic:
- 100mV @ 250µA, 5mA
- Current - Collector Cutoff (Max):
- 1µA
- Frequency - Transition:
- 230 MHz
- Power - Max:
- 250 mW
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- TO-236AB
PDTC114YT-QR FAQ
1.How can I place an order for PDTC114YT-QR through Aetrix?
Please submit a Request for Quotation (RFQ) for PDTC114YT-QR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PDTC114YT-QR reliable?
The price and inventory of PDTC114YT-QR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PDTC114YT-QR is usually 5 days.
3.What payment methods are accepted for PDTC114YT-QR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PDTC114YT-QR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PDTC114YT-QR?
PDTC114YT-QR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PDTC114YT-QR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PDTC114YT-QR?
For technical support, including PDTC114YT-QR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PDTC114YT-QR requirements.
6.How does Aetrix verify that PDTC114YT-QR is sourced from the original manufacturer or authorized distributors?
All PDTC114YT-QR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PDTC114YT-QR meets industry standards.
7.What is the process for return or replacement of PDTC114YT-QR?
All PDTC114YT-QR units undergo pre-shipment inspection (PSI). If there is an issue with PDTC114YT-QR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PDTC114YT-QR part is unused and in its original packaging.
Return procedure for PDTC114YT-QR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PDTC114YT-QR Tags
-
MUN5211T1G
onsemi
-
DTC043ZEBTL
Rohm Semiconductor
-
DTC114EKAT146
Rohm Semiconductor
-
DDTD113ZC-7-F
Diodes Incorporated
-
DRDNB16W-7
Diodes Incorporated
-
PDTC114ET,215
Nexperia USA Inc.
-
PDTC143ZT,215
Nexperia USA Inc.
-
PDTC143ET,215
Nexperia USA Inc.
-
PDTC143XT,215
Nexperia USA Inc.
-
MMUN2211LT1G
onsemi
-
PDTC144ET,215
Nexperia USA Inc.
-
PDTC124ET,215
Nexperia USA Inc.
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
