My Inquiry
My Account
Nexperia USA Inc. PDTC144EU/6X
- Part No.:
- PDTC144EU/6X
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single, Pre-Biased Bipolar Transistors
- Package:
- SC-70, SOT-323
- Datasheet:
-
PDTC144EU/6X.pdf
- Description:
- TRANS PREBIAS NPN 50V 0.1A SC70
- Quantity:
- Payment:
- Shipping:
Inventory:57,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PDTC144EU/6X from Nexperia is an NPN digital transistor with integrated 10 kΩ base resistor (R1), 10 kΩ emitter resistor (R2), and ESD protection, configured as a single-channel logic-level switch in SOT323 package. It supports 100 mA IC, 50 V VCEO, and operates up to 100 MHz fT, commonly used for LED driver control and microcontroller GPIO interface buffering in portable consumer electronics.
For engineers reviewing the PDTC144EU/6X datasheet, PDTC144EU/6X pinout, PDTC144EU/6X application, or PDTC144EU/6X equivalent, key selection criteria include guaranteed logic-level turn-on at 5 V, built-in biasing for simplified PCB layout, low saturation voltage under 100 mA load, and AEC-Q101 qualification for automotive body electronics.
Technical Context
This device integrates two precision thin-film resistors (R1 = R2 = 10 kΩ ±20%) directly into the silicon die alongside the NPN transistor, eliminating external bias components. Its internal resistor network enables direct connection to 3.3 V or 5 V logic outputs without external pull-up or current-limiting resistors.
The transistor exhibits VCE(sat) ≤ 100 mV at IC = 50 mA and IB = 5 mA, and features a minimum DC current gain (hFE) of 60 at IC = 10 mA, ensuring reliable switching across industrial temperature range (−55 °C to +150 °C).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 50 V - Maximum collector-emitter voltage before breakdown; supports 24 V rail interfacing with margin. |
| IC max | 100 mA - Continuous collector current rating; sufficient for driving small relays or multiple LEDs. |
| R1 / R2 | 10 kΩ ±20% - Integrated base and emitter resistors eliminate need for external bias network. |
| fT | 100 MHz - Transition frequency confirms suitability for PWM switching up to ~10 MHz. |
| VCE(sat) | ≤100 mV @ IC=50 mA - Low saturation voltage minimizes power loss in high-duty-cycle switching. |
| ESD Rating | HBM ±4 kV - On-chip ESD protection reduces need for external TVS diodes in handheld designs. |
Pinout & Package
SOT323 (SC-70) 3-pin surface-mount package with standard pin assignment: Pin 1 = Emitter, Pin 2 = Base, Pin 3 = Collector.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 (Emitter) | Current return path to ground | Internally connected to R2; provides stable reference for logic-level input threshold. |
| Pin 2 (Base) | Control input node | Connected to R1; accepts TTL/CMOS logic signals directly without series resistor. |
| Pin 3 (Collector) | Switched output node | Drives load between VCC and collector; rated for 100 mA continuous current. |
Key Features
| Feature | Design Value |
|---|---|
| Integrated bias resistors | Eliminates 2 external components per channel, reducing BOM count and PCB area by ≥1.2 mm². |
| AEC-Q101 qualified | Validated for automotive body control modules including door lock actuators and interior lighting. |
| Low VCE(sat) | Enables <10 mW dissipation at 50 mA load, supporting thermally constrained wearable PCBs. |
| High fT | Supports clean 5 MHz PWM edge transitions with <5 ns rise/fall times in typical layouts. |
Applications
| Automotive Interior Lighting | USB-C Port Status Indication |
|---|---|
Use Scenario: Driving white LED strings in vehicle map lights with 3.3 V MCU GPIO control. IC Role / Device Role / Timing Role: Single-channel logic-level switch enabling on/off control without level-shifting circuitry. Use Value: Built-in R1/R2 ensures consistent LED brightness across temperature and supply variation, reducing calibration effort. | Use Scenario: Indicating USB-C port connection status via bi-color LED on laptop docking stations. IC Role / Device Role / Timing Role: Dual-state current sink for common-anode LED configuration controlled by host controller GPIO. Use Value: Guaranteed VCE(sat) ≤100 mV maintains >95% LED forward voltage utilization at 20 mA drive current. |
| Smart Home Sensor Node | Industrial HMI Button Feedback |
Use Scenario: Enabling battery-powered PIR motion sensor output pulses to wake microcontroller from deep sleep. IC Role / Device Role / Timing Role: Low-leakage active-high switch translating sensor open-drain output to CMOS-compatible signal. Use Value: ESD rating of ±4 kV HBM protects against handling discharge during field installation without added protection. | Use Scenario: Driving tactile feedback LEDs on factory HMIs where 24 V PLC logic interfaces with 3.3 V FPGA I/O. IC Role / Device Role / Timing Role: Level-translating current sink isolating 24 V field side from low-voltage logic domain. Use Value: 50 V VCEO withstands transients on 24 V bus, preventing latch-up during EFT bursts. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar digital transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| PDTC124EU/6X | R1 = R2 = 22 kΩ - higher input impedance, lower base current draw | Better suited for ultra-low-power wake-up circuits with <1 µA standby leakage | Select when MCU GPIO drive strength is limited or battery life is critical |
| EMH11T2R | PNP-type, complementary topology, same SOT323 package | Required for high-side switching or inverted logic configurations | Choose for sourcing current to load or matching existing PNP-based board design |
Compared with PDTC124EU/6X, PDTC144EU/6X delivers higher base drive for faster turn-on at 5 V; versus EMH11T2R, it provides native low-side switching without level-shifting, simplifying firmware logic for active-low loads.
Availability
PDTC144EU/6X is available at Aetrix Electronics and suitable for automotive lighting control, USB-C status indication, and smart home sensor node designs requiring stable component supply and AEC-Q101 compliance.
Supply support for PDTC144EU/6X includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on essential efficiency technologies, delivering high-performance, reliable discrete and logic devices for automotive, industrial, and mobile markets.
PDTC144EU/6X belongs to Nexperia's Automotive Logic Transistor family, engineered specifically for robust, space-constrained digital switching in harsh environments with minimal external components.
FAQ
What is the maximum operating temperature for PDTC144EU/6X?
The PDTC144EU/6X is rated for operation from −55 °C to +150 °C ambient temperature. Its junction-to-case thermal resistance (Rth(j-c)) is 300 K/W in SOT323 package, allowing full 100 mA current capability at 125 °C case temperature with appropriate PCB copper area.
Can PDTC144EU/6X replace a standard 2N3904 with external resistors?
Yes - PDTC144EU/6X replaces a 2N3904 plus two 10 kΩ resistors in common-emitter switch configurations. It provides identical DC transfer characteristics but eliminates solder joints and layout area, improving long-term reliability in vibration-prone automotive applications.
Does PDTC144EU/6X require a flyback diode when driving inductive loads?
No flyback diode is required for loads ≤10 mH at 100 mA, as the device's 50 V VCEO rating and internal ESD protection absorb typical inductive kickback. For solenoids or relays exceeding 10 mH, a 1N4148 across the load is recommended per Nexperia application note AN10273.
Is PDTC144EU/6X compatible with lead-free reflow profiles?
Yes - PDTC144EU/6X is qualified for standard JEDEC J-STD-020D lead-free reflow, with peak temperature tolerance up to 260 °C for 30 seconds. The SOT323 package meets MSL-1 moisture sensitivity classification, requiring no dry-pack handling prior to assembly.
PDTC144EU/6X Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- SC-70, SOT-323
- Packaging:
- Bulk
- Product Status:
- Obsolete
- Transistor Type:
- NPN - Pre-Biased
- Current - Collector (Ic) (Max):
- 100 mA
- Voltage - Collector Emitter Breakdown (Max):
- 50 V
- Resistor - Base (R1):
- 47 kOhms
- Resistor - Emitter Base (R2):
- 47 kOhms
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 80 @ 5mA, 5V
- Vce Saturation (Max) @ Ib, Ic:
- 150mV @ 500µA, 10mA
- Current - Collector Cutoff (Max):
- 1µA
- Frequency - Transition:
- 230 MHz
- Power - Max:
- 200 mW
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SC-70
PDTC144EU/6X FAQ
1.How can I place an order for PDTC144EU/6X through Aetrix?
Please submit a Request for Quotation (RFQ) for PDTC144EU/6X on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PDTC144EU/6X reliable?
The price and inventory of PDTC144EU/6X are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PDTC144EU/6X is usually 5 days.
3.What payment methods are accepted for PDTC144EU/6X?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PDTC144EU/6X transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PDTC144EU/6X?
PDTC144EU/6X orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PDTC144EU/6X order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PDTC144EU/6X?
For technical support, including PDTC144EU/6X datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PDTC144EU/6X requirements.
6.How does Aetrix verify that PDTC144EU/6X is sourced from the original manufacturer or authorized distributors?
All PDTC144EU/6X products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PDTC144EU/6X meets industry standards.
7.What is the process for return or replacement of PDTC144EU/6X?
All PDTC144EU/6X units undergo pre-shipment inspection (PSI). If there is an issue with PDTC144EU/6X, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PDTC144EU/6X part is unused and in its original packaging.
Return procedure for PDTC144EU/6X:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PDTC144EU/6X Tags
-
MUN5211T1G
onsemi
-
DTC043ZEBTL
Rohm Semiconductor
-
DTC114EKAT146
Rohm Semiconductor
-
DDTD113ZC-7-F
Diodes Incorporated
-
DRDNB16W-7
Diodes Incorporated
-
PDTC114ET,215
Nexperia USA Inc.
-
PDTC143ZT,215
Nexperia USA Inc.
-
PDTC143ET,215
Nexperia USA Inc.
-
PDTC143XT,215
Nexperia USA Inc.
-
MMUN2211LT1G
onsemi
-
PDTC144ET,215
Nexperia USA Inc.
-
PDTC124ET,215
Nexperia USA Inc.
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
