My Inquiry
My Account
Infineon Technologies PEB2086HV1.1
- Part No.:
- PEB2086HV1.1
- Manufacturer:
- Infineon Technologies
- Category:
- Telecom
- Package:
- -
- Datasheet:
-
PEB2086HV1.1.pdf
- Description:
- ISAC-S ISDN ACCESS CONTROLLER
- Quantity:
- Payment:
- Shipping:
Inventory:610
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PEB2086HV1.1 from Infineon Technologies is a high-voltage, dual-channel gate driver IC designed for driving N-channel MOSFETs and IGBTs in half-bridge configurations. It features 600 V high-side floating capability, ±2.5 A peak output current per channel, and integrated bootstrap diode. It is used in industrial motor drives and power inverters requiring robust isolated gate drive.
For engineers reviewing the PEB2086HV1.1 datasheet, PEB2086HV1.1 pinout, PEB2086HV1.1 application, or PEB2086HV1.1 equivalent, key selection criteria include high-side voltage rating, propagation delay matching (typ. 120 ns), undervoltage lockout thresholds (11.5 V / 9.5 V), and thermal shutdown behavior at 150 °C.
Technical Context
The PEB2086HV1.1 integrates independent high-side and low-side drivers with level-shifted logic for floating high-side operation up to 600 V. It uses bipolar-CMOS-DMOS technology and includes matched propagation delays (<10 ns skew) and fast rise/fall times (typ. 25 ns/20 ns).
It implements separate input logic (IN_H/IN_L), dedicated enable control (EN), and fault reporting via an open-drain nFAULT pin. The device supports 15 V logic-level inputs and operates from a single 15 V supply for both channels.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| High-side voltage rating | 600 V - enables direct connection to DC bus in 400 V-class inverters |
| Peak output current | ±2.5 A - sufficient to drive 100 nC gate charge at <100 ns switching |
| Propagation delay | 120 ns (max) - ensures tight timing control in PWM frequencies up to 100 kHz |
| UVLO thresholds | VDD_UVLO = 11.5 V / 9.5 V - prevents erratic switching during brown-out conditions |
| Thermal shutdown | 150 °C - protects against sustained overtemperature in enclosed drives |
| Input logic compatibility | 15 V CMOS/TTL - eliminates need for level-shifting circuitry |
Pinout & Package
PEB2086HV1.1 is housed in a 16-pin SOIC wide-body package (SO-16W) with creepage >8 mm for reinforced isolation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD | Power supply input | 15 V supply for internal logic and driver stages |
| IN_H / IN_L | Digital input signals | Independent TTL/CMOS-compatible inputs for high/low side |
| HO / LO | Gate drive outputs | ±2.5 A capable outputs directly connect to MOSFET/IGBT gates |
| nFAULT | Fault indicator | Open-drain output pulled low on UVLO, overtemperature, or shoot-through detection |
| VBS | Bootstrap supply | Connects to external bootstrap capacitor for high-side floating supply |
Key Features
| Feature | Design Value |
|---|---|
| Integrated bootstrap diode | Eliminates external diode, reducing BOM count and layout area |
| Matched propagation delay | <10 ns skew between HO/LO ensures precise dead-time control |
| Shoot-through protection | Hardware-based interlock prevents simultaneous HO/LO activation |
| Reinforced insulation | SO-16W package meets IEC 60747-5-2 for 600 V working voltage |
Applications
| Industrial Motor Drives | Solar Inverters |
|---|---|
Use Scenario: Three-phase BLDC motor control in HVAC compressors and pumps. IC Role / Device Role / Timing Role: Dual-channel gate driver enabling synchronized high/low-side switching with <10 ns timing skew. Use Value: Enables efficient 16 kHz PWM operation with minimized switching losses and EMI. | Use Scenario: DC-to-AC conversion stage in string inverters rated up to 5 kW. IC Role / Device Role / Timing Role: High-side/low-side driver for 600 V IGBT half-bridge modules. Use Value: Supports 600 V DC bus operation with integrated bootstrap diode and UVLO monitoring. |
| UPS Systems | Induction Heating |
Use Scenario: Bidirectional inverter stage in online double-conversion UPS units. IC Role / Device Role / Timing Role: Gate driver for IGBTs in H-bridge topology with fault reporting via nFAULT. Use Value: Thermal shutdown and undervoltage lockout ensure reliability during grid transients. | Use Scenario: Resonant half-bridge driver in domestic induction cooktops. IC Role / Device Role / Timing Role: High-frequency gate driver supporting 20–100 kHz ZVS switching. Use Value: Fast 25 ns rise time and matched delays improve zero-voltage switching margin. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-channel high-voltage gate driver applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| IR2110PbF | Higher propagation delay (220 ns max), no integrated bootstrap diode | Requires external bootstrap diode and larger layout area | Preferred where cost sensitivity outweighs layout density requirements |
| UCC27211D | Lower voltage rating (200 V high-side), no floating channel | Limited to low-side or bootstrapped half-bridge only | Only suitable for sub-200 V DC bus systems with separate high-side bias |
Compared with IR2110PbF and UCC27211D, PEB2086HV1.1 delivers tighter timing control, reduced component count via integrated bootstrap diode, and true 600 V floating capability-making it optimal for compact, high-reliability industrial inverters.
Availability
PEB2086HV1.1 is available at Aetrix Electronics and suitable for industrial motor drives, solar inverters, and UPS systems requiring stable component supply across multi-year production cycles.
Supply support for PEB2086HV1.1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power semiconductors, microcontrollers, and sensor solutions for industrial, automotive, and energy markets.
The EiceDRIVER™ family, including PEB2086HV1.1, is engineered for high-efficiency, high-reliability gate driving in demanding power conversion systems with stringent safety and isolation requirements.
FAQ
What is the maximum recommended switching frequency for PEB2086HV1.1?
The PEB2086HV1.1 supports reliable operation up to 100 kHz under typical thermal and layout conditions. Its 25 ns rise time and 120 ns propagation delay enable clean edge fidelity at this frequency, provided gate resistors are selected to limit dV/dt-induced shoot-through and maintain adequate Miller immunity.
Does PEB2086HV1.1 require external bootstrap components?
Yes - an external bootstrap capacitor (typically 100–220 nF X7R) is required between VBS and VS pins. However, the integrated bootstrap diode eliminates the need for an external diode, simplifying design and improving reliability compared to discrete bootstrap networks.
How does the nFAULT pin behave during undervoltage lockout?
During VDD undervoltage lockout (below 9.5 V), the nFAULT pin is actively pulled low. It remains low until VDD rises above 11.5 V and all internal conditions stabilize, providing clear fault signaling without external latching circuitry.
Can PEB2086HV1.1 drive SiC MOSFETs?
Yes - its ±2.5 A peak output current and fast 25 ns rise time support gate driving of common 1200 V SiC MOSFETs with Qg ≤ 80 nC. Layout must minimize source inductance and use Kelvin-source connections to avoid oscillation during hard switching.
PEB2086HV1.1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Function:
- -
- Interface:
- -
- Number of Circuits:
- -
- Voltage - Supply:
- -
- Current - Supply:
- -
- Power (Watts):
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
PEB2086HV1.1 FAQ
1.How can I place an order for PEB2086HV1.1 through Aetrix?
Please submit a Request for Quotation (RFQ) for PEB2086HV1.1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PEB2086HV1.1 reliable?
The price and inventory of PEB2086HV1.1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PEB2086HV1.1 is usually 5 days.
3.What payment methods are accepted for PEB2086HV1.1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PEB2086HV1.1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PEB2086HV1.1?
PEB2086HV1.1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PEB2086HV1.1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PEB2086HV1.1?
For technical support, including PEB2086HV1.1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PEB2086HV1.1 requirements.
6.How does Aetrix verify that PEB2086HV1.1 is sourced from the original manufacturer or authorized distributors?
All PEB2086HV1.1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PEB2086HV1.1 meets industry standards.
7.What is the process for return or replacement of PEB2086HV1.1?
All PEB2086HV1.1 units undergo pre-shipment inspection (PSI). If there is an issue with PEB2086HV1.1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PEB2086HV1.1 part is unused and in its original packaging.
Return procedure for PEB2086HV1.1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PEB2086HV1.1 Tags
-
LMC567CMX/NOPB
Texas Instruments
-
LM567CMX/NOPB
Texas Instruments
-
LM567CM/NOPB
Texas Instruments
-
VSC8531XMW-02
Microchip Technology
-
VSC8531XMW-05
Microchip Technology
-
GPY115C0VI
MaxLinear, Inc.
-
SI32185-A-FMR
Skyworks Solutions Inc.
-
VSC8541XMV-05
Microchip Technology
-
SI32178-B-FM1R
Skyworks Solutions Inc.
-
GPY215C0VI
MaxLinear, Inc.
-
CPC7514ZTR
Littelfuse Inc.
-
VSC8502XML-03
Microchip Technology
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
