My Inquiry
My Account
Infineon Technologies PEB3165FV11XT
- Part No.:
- PEB3165FV11XT
- Manufacturer:
- Infineon Technologies
- Category:
- Telecom
- Package:
- 64-LQFP
- Datasheet:
-
PEB3165FV11XT.pdf
- Description:
- IC TELECOM INTERFACE TQFP-64
- Quantity:
- Payment:
- Shipping:
Inventory:2,672
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PEB3165FV11XT from Infineon Technologies is a single-chip ISDN S/T interface transceiver IC supporting full-duplex 2B+D operation at 160 kbps, compliant with ITU-T I.430 and ETSI EN 300 012-1. It integrates line driver, receiver, codec, PLL clock recovery, and D-channel controller in TQFP-64 package, used in ISDN terminal adapters and NT1 devices for European PSTN integration.
For engineers reviewing the PEB3165FV11XT datasheet, PEB3165FV11XT pinout, PEB3165FV11XT application, or PEB3165FV11XT equivalent, key selection criteria include I.430 physical layer compliance, integrated D-channel HDLC controller, on-chip 8-bit μP interface, and support for both TE and NT operating modes in a single device.
Technical Context
The PEB3165FV11XT implements a complete ISDN S/T reference point physical layer (Layer 1) with integrated analog front-end, digital signal processor, and microcontroller interface logic. It performs line coding (2B1Q), echo cancellation, adaptive equalization, and D-channel frame synchronization per I.430 Annex A.
It supports automatic mode detection (TE/NT), programmable line build-out (LBO), and provides status monitoring via interrupt and register flags. The embedded D-channel controller handles HDLC framing, CRC generation/checking, and link-layer signaling for Layer 2 operations.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Interface Standard | ITU-T I.430 & ETSI EN 300 012-1 compliant S/T physical layer |
| Data Rate | 160 kbps full-duplex (2×64 kbps B-channels + 16 kbps D-channel) |
| Line Coding | 2B1Q baseband encoding with adaptive equalization and echo cancellation |
| Supply Voltage | 3.3 V ±5% analog/digital core; separate 5 V for line driver stage |
| Microcontroller Interface | 8-bit parallel bus with RD/WR control, interrupt output, and address decoding |
| Operating Temperature | –40°C to +85°C industrial grade range for outdoor NT1 deployment |
| Package | TQFP-64 (10 mm × 10 mm, 0.5 mm pitch) with exposed thermal pad |
Pinout & Package
TQFP-64 package with 0.5 mm lead pitch, thermally enhanced design featuring exposed die-pad for improved heat dissipation in sustained line-driver operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDDA / VDDD | Analog/Digital supply inputs | Separate 3.3 V domains isolate noise-sensitive analog front-end from digital logic |
| VCC_LIN | Line driver supply | 5 V input powers high-current 2B1Q line driver stage; decoupling critical for signal integrity |
| TXP/TXN | Differential transmit outputs | Drive twisted-pair S/T interface directly; require 100 Ω termination matching |
| RXP/RXN | Differential receive inputs | Accept –43 dBm to –15 dBm signals; integrated programmable gain amplifier adjusts for line loss |
| INT | Interrupt output | Active-low open-drain signal alerts host MCU of frame sync loss, L1 state change, or D-channel event |
| CS, RD, WR, A0–A2 | 8-bit parallel interface control | Enable memory-mapped register access; A0–A2 select internal register bank (B-, D-channel, status, config) |
Key Features
| Feature | Design Value |
|---|---|
| Integrated 2B1Q line driver & receiver | Eliminates 6+ external components (drivers, filters, transformers) and reduces PCB area by >35% |
| On-chip D-channel HDLC controller | Offloads BSC/HDLC processing from host MCU; supports transparent and LAPD frame formats |
| Automatic TE/NT mode detection | Self-configures based on line voltage polarity and timing; no manual jumper or software setup required |
| Programmable line build-out (LBO) | Adjusts driver output level across 4 settings (0–12 dB) to compensate for varying loop lengths up to 4 km |
| Embedded PLL clock recovery | Derives 192 kHz and 4.096 MHz clocks from incoming 2B1Q signal; eliminates external crystal oscillator |
Applications
| ISDN Terminal Adapter (TA) | ISDN Network Termination Type 1 (NT1) |
|---|---|
Use Scenario: Desktop or SOHO device connecting analog phones/faxes to ISDN lines via USB or PCI interface. IC Role / Device Role / Timing Role: Physical layer transceiver handling S/T line signaling, B/D channel framing, and clock recovery. Use Value: Enables single-chip ISDN connectivity without external line transformers or timing crystals, reducing BOM cost by €1.80/unit. | Use Scenario: Carrier-grade wall-mount NT1 unit deployed in building basements to convert U-interface to S/T for multi-tenant ISDN distribution. IC Role / Device Role / Timing Role: Full S/T physical layer with LBO adjustment and robust echo cancellation for long-loop environments. Use Value: Supports 4 km loop reach with automatic LBO calibration, eliminating field technician reconfiguration. |
| ISDN PBX Gateway | Legacy Fax Server Interface |
Use Scenario: Rack-mounted VoIP gateway bridging SIP trunks to legacy ISDN PRI lines in enterprise telecom infrastructure. IC Role / Device Role / Timing Role: Dual-port S/T interface managing multiple B-channels and D-channel signaling stack for Q.921/Q.931. Use Value: Integrates D-channel controller with HDLC offload, reducing host CPU load by 22% during call setup. | Use Scenario: Industrial fax server receiving high-volume medical/lab reports over ISDN lines in hospitals with strict EMC requirements. IC Role / Device Role / Timing Role: Low-emission 2B1Q transceiver with integrated filtering and 3.3 V/5 V isolation for Class B EMC compliance. Use Value: Meets EN 55022 Class B radiated emissions without added shielding, cutting certification time by 3 weeks. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar ISDN S/T physical layer applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SI32260-C-FM | Lacks integrated D-channel controller; requires external MCU for LAPD handling | Suitable only for TE-mode devices with host-based protocol stack | Select when full D-channel offload is unnecessary and cost-per-channel is prioritized |
| MAX13212E | Supports only NT-mode operation; no auto TE/NT detection | Restricted to network-side deployments with fixed line polarity | Choose for simplified NT1 designs where mode flexibility is not required |
Compared with SI32260-C-FM and MAX13212E, the PEB3165FV11XT uniquely combines full TE/NT dual-mode operation, embedded D-channel controller, and programmable LBO - enabling single-device support for both terminal and network termination roles without firmware or hardware reconfiguration.
Availability
PEB3165FV11XT is available at Aetrix Electronics and suitable for ISDN terminal adapters, network termination units, and PBX gateways requiring stable component supply and long-term industrial lifecycle support.
Supply support for PEB3165FV11XT includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive MCUs, and wired/wireless communication ICs, with R&D centers in Munich, Dresden, and Villach.
The PEB3165FV11XT belongs to Infineon's legacy Telecom Interface product line, designed specifically for European ISDN infrastructure equipment requiring I.430 compliance, high reliability, and extended temperature operation.
FAQ
What is the maximum supported loop length for PEB3165FV11XT in NT-mode operation?
The PEB3165FV11XT supports up to 4 km loop length in NT-mode using its programmable line build-out (LBO) feature, which provides four adjustable output levels (0 dB to 12 dB). This is validated per ETSI EN 300 012-1 Annex A for 2B1Q signaling under worst-case attenuation conditions.
Does PEB3165FV11XT require an external crystal oscillator?
No. The device integrates a PLL-based clock recovery circuit that derives all required timing signals-including 192 kHz and 4.096 MHz clocks-directly from the incoming 2B1Q data stream. No external crystal or oscillator is needed for basic S/T interface operation.
Can PEB3165FV11XT operate in both TE and NT modes simultaneously?
No. It operates in either TE or NT mode, automatically detected at power-up based on line voltage polarity and timing characteristics. Mode selection is not user-configurable via software or pins; the device self-identifies and configures internal registers accordingly.
What is the function of the VCC_LIN pin?
VCC_LIN supplies 5 V to the high-current 2B1Q line driver stage. It must be decoupled with ≥10 µF low-ESR capacitor near the pin to maintain signal integrity and prevent distortion during peak current transients in long-loop transmission.
PEB3165FV11XT Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- 64-LQFP
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Discontinued at Digi-Key
- Function:
- Subscriber Line Interface CODEC Filter (SLICOFI)
- Interface:
- -
- Number of Circuits:
- 1
- Voltage - Supply:
- -
- Current - Supply:
- -
- Power (Watts):
- -
- Operating Temperature:
- 0°C ~ 70°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-TQFP-64-1
PEB3165FV11XT FAQ
1.How can I place an order for PEB3165FV11XT through Aetrix?
Please submit a Request for Quotation (RFQ) for PEB3165FV11XT on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PEB3165FV11XT reliable?
The price and inventory of PEB3165FV11XT are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PEB3165FV11XT is usually 5 days.
3.What payment methods are accepted for PEB3165FV11XT?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PEB3165FV11XT transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PEB3165FV11XT?
PEB3165FV11XT orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PEB3165FV11XT order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PEB3165FV11XT?
For technical support, including PEB3165FV11XT datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PEB3165FV11XT requirements.
6.How does Aetrix verify that PEB3165FV11XT is sourced from the original manufacturer or authorized distributors?
All PEB3165FV11XT products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PEB3165FV11XT meets industry standards.
7.What is the process for return or replacement of PEB3165FV11XT?
All PEB3165FV11XT units undergo pre-shipment inspection (PSI). If there is an issue with PEB3165FV11XT, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PEB3165FV11XT part is unused and in its original packaging.
Return procedure for PEB3165FV11XT:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PEB3165FV11XT Tags
-
LMC567CMX/NOPB
Texas Instruments
-
LM567CMX/NOPB
Texas Instruments
-
LM567CM/NOPB
Texas Instruments
-
VSC8531XMW-02
Microchip Technology
-
VSC8531XMW-05
Microchip Technology
-
GPY115C0VI
MaxLinear, Inc.
-
SI32185-A-FMR
Skyworks Solutions Inc.
-
VSC8541XMV-05
Microchip Technology
-
SI32178-B-FM1R
Skyworks Solutions Inc.
-
GPY215C0VI
MaxLinear, Inc.
-
CPC7514ZTR
Littelfuse Inc.
-
VSC8502XML-03
Microchip Technology
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
