NXP Semiconductors PNEV5190BP

Overview

PNEV5190BP from NXP Semiconductors is a customer development board designed to evaluate and prototype with the PNEV5190MB NFC module, which integrates the high-power PN5190 NFC frontend IC. It supports SPI host interface, 27.12 MHz crystal timing, and RF matching for EMVCo-compliant contactless payment and access systems.

For engineers reviewing the PNEV5190BP datasheet, PNEV5190BP pinout, PNEV5190BP application, or PNEV5190BP equivalent, this board serves as a reference implementation for Kinetis K82-based NFC reader designs requiring rapid validation of antenna matching, power delivery, and tamper detection interfaces.

Technical Context

The PNEV5190BP implements a complete NFC reader system architecture centered on the PNEV5190MB module. It provides dedicated routing for VBATPWR, VUP (up to 6 V), and VDDIO (1.8 V/3.3 V), with optimized current loops for DC-DC inductors L1/L2/L3 and EMV filter components.

Host connectivity includes SPI (MOSI/MISO/CLK/NSS), IRQ, VEN (~RESET), GPIO0–GPIO3, and optional SWD debug pins. RF interface signals MOD_TX1/MOD_TX2/MOD_RXP/MOD_RXN are routed to an external 45 mm × 45 mm PCB antenna with impedance-matched matching network.

Key Specifications

Availability

PNEV5190BP is available at Aetrix Electronics and suitable for NFC reader prototyping, EMVCo certification testing, and secure access system development requiring stable component supply and traceable sourcing.

Supply support for PNEV5190BP includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

NXP Semiconductors is a global semiconductor company specializing in secure connectivity solutions for automotive, industrial, and IoT applications.

The PNEV5190BP belongs to NXP's NFC development platform family, engineered to accelerate design-in of high-performance, standards-compliant contactless readers for payment, transit, and secure authentication use cases.

FAQ

What is the primary function of the PNEV5190BP development board?

The PNEV5190BP is a customer development board built around the PNEV5190MB module to enable rapid prototyping and evaluation of NFC reader systems using the PN5190 NFC frontend IC. It provides full signal routing, power conditioning, and antenna interface for EMVCo and ISO/IEC 14443-compliant applications. The PNEV5190BP supports Kinetis K82 microcontroller integration and includes test points for SPI, IRQ, VEN, and tamper detection signals.

Does the PNEV5190BP include the PN5190 IC directly, or is it hosted on a separate module?

The PNEV5190BP does not integrate the PN5190 IC directly; instead, it hosts the PNEV5190MB module - a pre-certified, surface-mount board containing the PN5190 VBGA64 NFC frontend IC, matching components, and optimized RF layout. This modular approach isolates NFC-specific circuitry while allowing flexible host controller selection. The PNEV5190BP provides mechanical mounting, interconnects, and auxiliary circuitry to support the PNEV5190MB in a complete evaluation environment.

Which host microcontrollers are compatible with the PNEV5190BP?

The PNEV5190BP is explicitly validated with the NXP Kinetis K82 microcontroller, as shown in the reference schematic (Figure 4). Its SPI interface (MOSI/MISO/CLK/NSS), IRQ, VEN, and GPIO0–GPIO3 signals are electrically and logically compatible with any host MCU supporting 1.8 V or 3.3 V I/O levels and standard SPI timing. The PNEV5190BP pinout and voltage domains are documented in RM00264, enabling porting to other ARM Cortex-M or similar controllers with appropriate level-shifting if needed.

Can the PNEV5190BP be used for EMVCo Level 1 certification testing?

Yes - the PNEV5190BP, when used with the PNEV5190MB module, is intended for development and prototype purposes aligned with EMVCo NFC reader requirements. Its layout includes EMV filter inductors (L1/L2/L3), specified capacitor values, and antenna matching per NXP's reference design. While the board itself is not certified, it serves as a compliant starting point for building EMVCo Level 1–qualified readers. Final certification requires full system validation including firmware, antenna tuning, and protocol stack compliance - all supported by the PNEV5190BP's signal accessibility and documented electrical behavior.

What power supply options does the PNEV5190BP support?

The PNEV5190BP accepts 7.5 VDC ±5 % via barrel jack or 5 V via USB Micro-B connector, with onboard LDOs generating 6 V (for VUP), 3.3 V (for VDDIO), and 1.8 V (for VDDC/VDDNV). VUP can be supplied externally up to 6 V, and VBATPWR defaults to 3.3 V or 5 V depending on configuration. The PNEV5190BP's power architecture mirrors production-level NFC reader requirements, including dedicated decoupling for VDDPA, VDDIO, and analog rails - critical for stable RF performance in the PNEV5190BP system.