My Inquiry
My Account
Nexperia USA Inc. PZU884LS-C15-QYL
- Part No.:
- PZU884LS-C15-QYL
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single Zener Diodes
- Package:
- SOD-882
- Datasheet:
-
PZU884LS-C15-QYL.pdf
- Description:
- DIODE ZENER 14.68V 365MW DFN1006
- Quantity:
- Payment:
- Shipping:
Inventory:9,567
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
PZU884LS-C15-Q from Nexperia is a 15 V ±5 % tolerance Zener voltage regulator diode in a DFN1006BD-2 (SOD882BD) leadless SMD package with side-wettable flanks, designed for precision voltage reference and clamping in automotive power rails and sensor signal conditioning circuits. It delivers 15 V nominal regulation at IZ = 5 mA, exhibits 99 Ω typical differential resistance, supports 200 mA forward current, and is qualified to AEC-Q101.
For engineers reviewing the PZU884LS-C15-Q datasheet, PZU884LS-C15-Q pinout, PZU884LS-C15-Q application, or PZU884LS-C15-Q equivalent, key selection criteria include its 15 V breakdown voltage tolerance, low leakage (<0.05 μA at VR = 12 V), side-wettable flank solderability, and automotive-grade reliability under −55 °C to +150 °C ambient conditions.
Technical Context
This Zener diode operates in reverse-bias breakdown mode to maintain stable 15 V reference voltage across load variations and temperature shifts. Its hard breakdown knee and low dynamic impedance (99 Ω typ. at 5 mA) ensure tight regulation during transient load steps in low-power analog subsystems.
The device uses intentional minor leakage optimization per AN90031 for fast switching response and reduced noise-distinct from the low-leakage B-series variants-making it suitable for EMI-sensitive automotive signal paths where rapid voltage stabilization is required without excessive thermal drift.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Zener voltage VZ | 14.25 V to 15.75 V at IZ = 5 mA - defines ±5 % tolerance band for stable reference generation |
| Differential resistance rdif | 99 Ω typical at IZ = 5 mA - determines regulation stiffness against current variation |
| Reverse current IR | < 0.05 μA at VR = 12 V - enables ultra-low standby power in always-on circuits |
| Total power dissipation Ptot | 365 mW on FR4 PCB - sets maximum continuous DC power handling in standard layout |
| Non-repetitive peak power PZSM | 40 W at tp = 100 μs - supports transient overvoltage suppression in automotive load-dump events |
| Junction temperature Tj | −55 °C to +150 °C - ensures operation across full automotive under-hood thermal range |
| Package | DFN1006BD-2 (SOD882BD), 1.0 mm × 0.6 mm × 0.47 mm - enables high-density placement and automated optical inspection |
Pinout & Package
DFN1006BD-2 (SOD882BD) is a 2-terminal, leadless surface-mount plastic package with side-wettable flanks for reliable reflow solder joint inspection. Body dimensions: 1.0 mm × 0.6 mm × 0.47 mm; pitch: 0.65 mm; cathode indicated by marking bar.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (K) | Connected to regulated output node; reverse-bias anode-to-cathode voltage establishes Zener conduction |
| 2 | Anode (A) | Connected to ground or lower-potential rail; completes bias path for controlled breakdown current |
Key Features
| Feature | Design Value |
|---|---|
| Side-wettable flanks | Enables automated optical inspection (AOI) of solder joints without X-ray, reducing manufacturing defect escape |
| AEC-Q101 qualification | Validated for automotive applications including engine control units and ADAS sensor modules |
| Optimized leakage profile | Intentional minor leakage improves switching speed and reduces broadband noise per AN90031 |
| Hard breakdown knee | Sharp transition into conduction minimizes voltage hysteresis during regulation transitions |
| E24 voltage range support | 15 V nominal point aligns with common microcontroller I/O and sensor supply rails |
Applications
| Automotive Power Rail Clamping | Low-Power Sensor Reference |
|---|---|
|
Use Scenario: Suppressing transients on 12 V battery-fed MCU power domains in body control modules. IC Role / Device Role / Timing Role: Zener clamp limiting voltage excursions during load dump or jump-start events. Use Value: Withstands 40 W non-repetitive surges and maintains ≤15.75 V clamping level to protect downstream 16-bit ADCs and CAN transceivers. |
Use Scenario: Providing stable 15 V reference for analog front-end amplifiers in tire pressure monitoring sensors. IC Role / Device Role / Timing Role: Precision voltage reference source for ratiometric signal conditioning. Use Value: 99 Ω differential resistance and <0.05 μA leakage ensure reference stability across −40 °C to +125 °C operating range. |
| Industrial PLC Input Protection | USB-C PD Feedback Divider |
|
Use Scenario: Overvoltage protection on 24 V digital input channels exposed to field wiring faults. IC Role / Device Role / Timing Role: Reverse-bias shunt regulator absorbing fault energy before upstream TVS triggers. Use Value: 365 mW continuous dissipation and side-wettable flanks allow robust, inspectable placement on industrial PCBs. |
Use Scenario: Setting feedback voltage in isolated flyback converters for USB-C Power Delivery adapters. IC Role / Device Role / Timing Role: Voltage divider top element establishing precise 15 V reference for optocoupler feedback loop. Use Value: ±5 % tolerance and low temperature coefficient (±11 mV/K) minimize output voltage drift across line/load/temperature. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Zener regulation applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BZX84-C15,115 | ±5 % tolerance, SOT23 package (3.0 mm × 1.4 mm), higher Rth(j-a) (500 K/W), no AEC-Q101 qualification | General-purpose industrial use only; unsuitable for automotive under-hood deployment | Select when cost sensitivity outweighs space constraints and automotive compliance requirements |
| MMSZ5245B-TP | ±5 % tolerance, SOD-123 package (2.7 mm × 1.4 mm), 17 Ω rdif, 500 mW Ptot, no side-wettable flanks | Higher power handling but larger footprint and no AOI-compatible terminations | Choose for legacy designs requiring higher continuous dissipation and existing SOD-123 footprint compatibility |
Compared with BZX84-C15,115 and MMSZ5245B-TP, the PZU884LS-C15-Q offers superior board-level miniaturization, AEC-Q101 compliance, and manufacturability via side-wettable flanks-critical for automotive electronics where space, reliability, and process control are non-negotiable.
Availability
PZU884LS-C15-Q is available at Aetrix Electronics and suitable for automotive power management, sensor signal conditioning, industrial PLC input protection, and USB-C PD feedback circuits requiring stable component supply with traceable sourcing and lifecycle continuity.
Supply support for PZU884LS-C15-Q includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on essential efficiency-enhancing components, delivering high-performance, reliable, and scalable solutions for automotive, industrial, and consumer markets.
The PZU884LS-Q series belongs to Nexperia's automotive-qualified Zener regulator portfolio, engineered specifically for precision voltage reference and transient clamping in space-constrained, thermally demanding automotive subsystems.
FAQ
What is the Zener voltage tolerance and test condition for PZU884LS-C15-Q?
The PZU884LS-C15-Q has a nominal Zener voltage of 15 V with ±5 % tolerance, specified at IZ = 5 mA and Tj = 25 °C. Measured values fall between 14.25 V and 15.75 V under these conditions, as confirmed in Table 8 of the Rev. 4 datasheet.
Does PZU884LS-C15-Q support automated optical inspection (AOI)?
Yes-its DFN1006BD-2 package features side-wettable flanks, enabling reliable solder joint inspection using standard AOI systems without requiring X-ray. This is explicitly documented in Section 1 and Package Outline Fig. 9 of the datasheet.
How does the leakage current behavior differ between PZU884LS-C15-Q and the B-series variants?
PZU884LS-C15-Q belongs to the C-series, which intentionally increases leakage current versus the B-series to optimize fast switching and reduce noise, per Application Note AN90031. At VR = 12 V, C-series leakage is <0.05 μA, while B-series is typically <0.1 μA but with slower response.
Is PZU884LS-C15-Q qualified for under-hood automotive environments?
Yes-it is fully qualified to AEC-Q101 and rated for operation from −55 °C to +150 °C junction temperature. Its thermal resistance (Rth(j-a) = 340 K/W) and 365 mW power rating are validated on FR4 PCB with standard footprint, meeting under-hood thermal requirements.
PZU884LS-C15-QYL Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- PZU884LS-Q
- Package/Case:
- SOD-882
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Voltage - Zener (Nom) (Vz):
- 14.68 V
- Tolerance:
- ±5.72%
- Power - Max:
- 365 mW
- Impedance (Max) (Zzt):
- 15 Ohms
- Current - Reverse Leakage @ Vr:
- 50 nA @ 11 V
- Voltage - Forward (Vf) (Max) @ If:
- 900 mV @ 10 mA
- Operating Temperature:
- 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DFN1006BD-2
PZU884LS-C15-QYL FAQ
1.How can I place an order for PZU884LS-C15-QYL through Aetrix?
Please submit a Request for Quotation (RFQ) for PZU884LS-C15-QYL on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for PZU884LS-C15-QYL reliable?
The price and inventory of PZU884LS-C15-QYL are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for PZU884LS-C15-QYL is usually 5 days.
3.What payment methods are accepted for PZU884LS-C15-QYL?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for PZU884LS-C15-QYL transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for PZU884LS-C15-QYL?
PZU884LS-C15-QYL orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your PZU884LS-C15-QYL order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for PZU884LS-C15-QYL?
For technical support, including PZU884LS-C15-QYL datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your PZU884LS-C15-QYL requirements.
6.How does Aetrix verify that PZU884LS-C15-QYL is sourced from the original manufacturer or authorized distributors?
All PZU884LS-C15-QYL products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that PZU884LS-C15-QYL meets industry standards.
7.What is the process for return or replacement of PZU884LS-C15-QYL?
All PZU884LS-C15-QYL units undergo pre-shipment inspection (PSI). If there is an issue with PZU884LS-C15-QYL, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The PZU884LS-C15-QYL part is unused and in its original packaging.
Return procedure for PZU884LS-C15-QYL:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
PZU884LS-C15-QYL Tags
-
MMBZ5240B-7-F
Diodes Incorporated
-
BZT52C5V6T-7
Diodes Incorporated
-
MMSZ5231B-7-F
Diodes Incorporated
-
BZT52C15-7-F
Diodes Incorporated
-
BZX84C3V3LT1G
onsemi
-
MMSZ5245BS-7-F
Diodes Incorporated
-
MMSZ4682T1G
onsemi
-
BZT52C15S-7-F
Diodes Incorporated
-
MM5Z5V1ST1G
onsemi
-
SMAJ4744A-TP
Micro Commercial Co
-
BZT52C3V6LP-7
Diodes Incorporated
-
SMAZ12-13-F
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
