Renesas R0E53034ECFK60

Overview

R0E53034ECFK60 from Renesas Electronics is a dedicated converter board enabling signal interface between the R0E521300MCU00 MCU unit (R8C Family R8C/3x Series) and 48-pin 0.5mm-pitch LQFP foot patterns used by R8C/34E, /34F, /34G, and /34H Group microcontrollers. It supports debugging and on-board evaluation via socketed mounting, includes YQPACK048SD and NQPACK048SD sockets, and guarantees 50 insertion/removal cycles.

For engineers reviewing the R0E53034ECFK60 datasheet, R0E53034ECFK60 pinout, R0E53034ECFK60 application, or R0E53034ECFK60 equivalent, this board enables rapid prototyping and emulator integration for R8C/34-series MCUs without custom PCB design - critical when validating firmware on target hardware with legacy or non-standard footprint layouts.

Technical Context

The R0E53034ECFK60 bridges the R0E521300MCU00 evaluation unit to standard 48-pin LQFP (PLQP0048KB-A) footprints using a rigid PCB with dual-socket mechanical interface. It maps MCU signals through a fixed pin correspondence table (Table 2), preserving functional integrity for debug and flash programming.

No active circuitry is present: the board is passive, with direct trace routing between CN1 (100-pin connector) and the YQPACK048SD socket. Signal integrity relies on controlled impedance layout and mechanical alignment via four YQ-GUIDEs - no soldering or configuration required.

Key Specifications

Availability

R0E53034ECFK60 is available at Aetrix Electronics and suitable for R8C/34-series MCU development, embedded firmware validation, and production-ready on-board evaluation requiring stable component supply and consistent mechanical interface fidelity.

Supply support for R0E53034ECFK60 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and consumer applications.

The R0E53034ECFK60 belongs to Renesas' legacy R8C development tools product line, designed specifically to accelerate hardware bring-up and debug for R8C/34-series MCUs by eliminating custom adapter board design.

FAQ

What is the primary purpose of the R0E53034ECFK60?

The R0E53034ECFK60 is a passive converter board that enables connection of the R0E521300MCU00 MCU evaluation unit to standard 48-pin 0.5mm-pitch LQFP foot patterns used by R8C/34E, /34F, /34G, and /34H Group microcontrollers. It facilitates debugging and on-board evaluation without custom PCB design - the R0E53034ECFK60 achieves this via mechanical socket interface and fixed signal mapping, not active logic.

Which emulator cables are compatible with the R0E53034ECFK60?

The R0E53034ECFK60 is designed exclusively for use with the R0E001000FLX10 flexible cable from Renesas E1 or E20 emulators. Its upper connector (CN1) is mechanically and electrically matched to that cable - no other emulator cables or adapters are supported per the official User's Manual REJ10J1864-0200 Rev.2.00.

Does the R0E53034ECFK60 require power or configuration?

No. The R0E53034ECFK60 is a fully passive board with no ICs, jumpers, or configuration options. It contains only copper traces routing signals between the CN1 connector and the YQPACK048SD socket. Power is supplied solely by the target MCU system or emulator - the R0E53034ECFK60 itself draws zero current and requires no setup.

What socket components are included with the R0E53034ECFK60?

The R0E53034ECFK60 package includes one YQPACK048SD socket, one NQPACK048SD socket, four YQ-GUIDEs for mechanical alignment, and the R0E53034ECFK60 board itself. HQPACK048SD is referenced for on-board evaluation but is not included - it must be sourced separately from Tokyo Eletech Corporation.

Can the R0E53034ECFK60 be used with MCUs outside the R8C/34 series?

No. The R0E53034ECFK60 is functionally and mechanically optimized only for R8C/34E, /34F, /34G, and /34H Group MCUs in 48-pin LQFP packages. Its pin mapping (Table 2) matches those specific devices - using it with other families risks incorrect signal routing, as no general-purpose translation or buffering is provided by the R0E53034ECFK60.