My Inquiry
My Account
Renesas R5F104LLGFA#30
- Part No.:
- R5F104LLGFA#30
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 64-LQFP
- Datasheet:
-
R5F104LLGFA#30.pdf
- Description:
- IC MCU 16BIT 512KB FLASH 64LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:476
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
R5F104LLGFA#30 from Renesas is a 64-pin LFQFP (0.5 mm pitch), 512 KB flash, 32 KB RAM, RL78/G14 16-bit MCU operating at 32 MHz with 44 DMIPS, ultra-low-power consumption (66 μA/MHz active, 0.60 μA RTC+LVD mode), and industrial-grade temperature range (−40°C to +105°C) for embedded control in motor drives and sensor nodes.
For engineers reviewing the R5F104LLGFA#30 datasheet, R5F104LLGFA#30 pinout, R5F104LLGFA#30 application, or R5F104LLGFA#30 equivalent, key selection criteria include its 512 KB code flash with 1 KB block erase, dual 8-channel 16-bit timers (TAU), integrated RTC with calendar/alarm, 10-bit 20-channel ADC, and hardware event link controller (ELC) enabling deterministic peripheral triggering without CPU intervention.
Technical Context
The R5F104LLGFA#30 implements the RL78 CPU core with CISC architecture, 3-stage pipeline, and configurable instruction timing (0.03125 µs min @ 32 MHz to 30.5 µs @ 32.768 kHz). It integrates a Data Transfer Controller (DTC) supporting normal, repeat, and block transfer modes activated by 19–26 event sources via the Event Link Controller (ELC).
Its mixed-signal subsystem includes a 10-bit ADC with internal 1.45 V reference and temperature sensor, dual 8-bit DACs (0–VDD output), two comparators with window/high-speed/low-speed modes, and serial interfaces: up to 8 CSI channels, 4 UART/LIN channels, and 10 I²C/SimpI²C channels - all configurable via peripheral I/O redirection registers.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | RL78 16-bit CISC with 3-stage pipeline and multiply/divide/accumulate instructions |
| Max Operating Frequency | 32 MHz - delivers 44 DMIPS with 0.03125 µs minimum instruction time |
| Memory Configuration | 512 KB on-chip flash (1 KB erase blocks), 32 KB RAM, 8 KB data flash (1M rewrite cycles) |
| Power Consumption | 66 μA/MHz active mode; 0.60 μA in STOP mode with RTC + LVD enabled |
| Analog Peripherals | 10-bit 20-channel ADC (VDD-referenced, internal 1.45 V ref, temp sensor); dual 8-bit DACs (0–VDD output) |
| Timer Resources | 8–12 × 16-bit timers (TAU/Timer RJ/RD/RG), 1 × 12-bit interval timer, 1 × RTC (99-year calendar, alarm, correction) |
| Serial Interfaces | Up to 8 CSI, 4 UART/LIN, 10 I²C/SimpI²C - all support hardware flow control and clock stretching |
Pinout & Package
Package: 64-pin LFQFP, 10 × 10 mm body, 0.5 mm pitch, exposed thermal pad (recommended to connect to VSS).
| Pin | Circuit Role | Design Meaning |
|---|---|---|
| P121 / X1 | Crystal input | Primary low-frequency crystal oscillator input (32.768 kHz) for RTC and sub-system clock |
| P122 / X2 / EXCLK | Crystal output / external clock | Crystal oscillator output or external clock input (up to 20 MHz) for main system clock |
| P137 / INTP0 | Interrupt input | Edge-triggered external interrupt source (INTP0), supports wake-up from STOP/HALT modes |
| P60 / SCLA0 | I²C bus interface | Open-drain SCL line for I²C channel 0 - supports standard/fast-mode (100/400 kHz) |
| P61 / SDAA0 | I²C bus interface | Open-drain SDA line for I²C channel 0 - supports arbitration, clock stretching, and multi-master |
| P31 / TI03 / TO03 / INTP4 / PCLBUZ0 | Multi-function I/O | Configurable as timer input/output, external interrupt, or buzzer output - enables precise tone generation |
| REGC | Regulator bypass | Connect 0.47–1 µF capacitor to VSS to stabilize internal voltage regulator for analog/peripheral domains |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low-power operation | 0.60 μA STOP mode with RTC + LVD active enables battery-powered operation for >10 years on coin cell |
| Hardware event linking (ELC) | Direct peripheral-to-peripheral triggering without CPU involvement - reduces latency and firmware overhead |
| Data flash background operation (BGO) | Execute code from flash while rewriting data flash - enables seamless firmware updates and logging |
| On-chip debug & self-programming | Full on-chip debug with boot swapping and flash shield window - supports secure field firmware upgrades |
| Dual 16-bit timer arrays (TAU) | 8-channel TAU with complementary PWM, dead-time insertion, and phase-shift control for motor drive applications |
Applications
| Motor Control System | Industrial Sensor Node |
|---|---|
|
Use Scenario: Brushless DC (BLDC) motor commutation with current sensing and thermal monitoring in HVAC blowers. IC Role / Device Role: Main system controller executing FOC algorithm, managing gate drivers, and interfacing with Hall sensors and shunt amplifiers. Use Value: Integrated 10-bit 20-channel ADC with internal reference enables simultaneous sampling of 3-phase currents and temperature; dual TAU timers generate synchronized 6-PWM outputs with programmable dead time. |
Use Scenario: Battery-powered environmental monitor measuring temperature, humidity, and CO₂ via digital sensors over I²C. IC Role / Device Role: Low-power host MCU handling sensor polling, data fusion, and wireless transmission scheduling. Use Value: 0.60 μA STOP mode with RTC wake-up allows 1-second sensor reads and BLE transmit bursts; 8 KB data flash stores calibration coefficients and historical logs without external memory. |
| Smart Appliance UI | Programmable Logic Controller (PLC) I/O Module |
|
Use Scenario: Touch-enabled front panel for washing machine with LED indicators, buzzer feedback, and real-time cycle status. IC Role / Device Role: Dedicated UI controller managing capacitive touch sensing, segment LCD driving, and audio feedback. Use Value: On-chip PCLBUZ0/PCLBUZ1 support direct piezo buzzer drive; 64-pin package provides ample GPIO for LED matrix and touch electrode routing; hardware ELC synchronizes buzzer tone with display updates. |
Use Scenario: DIN-rail mounted digital I/O expansion module with isolated inputs/outputs and Modbus RTU communication. IC Role / Device Role: Protocol handler and I/O state manager interfacing with optocouplers, relay drivers, and RS-485 transceivers. Use Value: Four UART/LIN channels support dual Modbus ports (master/slave); 16-bit timers implement precise pulse-width measurement for frequency-input sensors; 512 KB flash accommodates protocol stack + field-upgradable configuration. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F104LKGBA#30 | Same RL78/G14 family, 256 KB flash, 24 KB RAM, identical 64-pin LFQFP-0.5 mm package and peripheral set | Suitable for cost-sensitive designs where 512 KB flash is unnecessary; retains full timer, ADC, and ELC functionality | Select when firmware size < 200 KB and BOM cost optimization is prioritized over future-proofing |
| R5F104GLGFB#30 | Same 512 KB flash, but 48-pin LFQFP-0.5 mm package; reduced I/O count (62 vs. 78 GPIO), no TAU channel expansion | Fits space-constrained PCBs; lacks second TAU unit and 4 ADC channels - limits motor control complexity | Choose for compact designs with simpler analog/sensor requirements and no need for dual TAU or >16 ADC inputs |
Compared with R5F104LKGBA#30 and R5F104GLGFB#30, the R5F104LLGFA#30 uniquely combines maximum code density (512 KB), full I/O count (78 pins usable), dual TAU timer arrays, and industrial −40°C to +105°C operation - making it the only option among the three qualified for high-complexity, thermally demanding embedded control.
Availability
R5F104LLGFA#30 is available at Aetrix Electronics and suitable for motor control systems, industrial sensor nodes, smart appliance UIs, and PLC I/O modules requiring stable component supply across extended product lifecycles.
Supply support for R5F104LLGFA#30 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and IoT markets.
The RL78/G14 product line delivers true low-power 16-bit performance for general-purpose embedded control, emphasizing energy efficiency, integrated analog peripherals, and hardware acceleration (ELC/DTC) to reduce firmware complexity in resource-constrained applications.
FAQ
What is the maximum operating temperature rating for the R5F104LLGFA#30?
The R5F104LLGFA#30 is rated for industrial operation from −40°C to +105°C, as indicated by the 'G' suffix in the part number. This rating applies across its full 1.6–5.5 V supply range and validates its use in thermally demanding environments such as motor drives and factory automation equipment where ambient temperatures exceed +85°C.
Does the R5F104LLGFA#30 support hardware-based PWM generation for motor control?
Yes, the R5F104LLGFA#30 integrates two Timer Array Units (TAU), each providing up to 4 independent 16-bit timer channels. These support complementary PWM output with programmable dead-time insertion, phase-shift control, and synchronization via the Event Link Controller - enabling robust 3-phase BLDC or stepper motor control without CPU overhead.
How many I²C interfaces does the R5F104LLGFA#30 provide, and what are their capabilities?
The R5F104LLGFA#30 supports up to 10 I²C/Simplified I²C channels. Each channel operates in standard (100 kHz) and fast (400 kHz) modes, supports clock stretching, multi-master arbitration, and 7-/10-bit addressing. Pins P60/SCLA0 and P61/SDAA0 are dedicated to I²C channel 0 and are electrically optimized for noise immunity in industrial bus environments.
Can the R5F104LLGFA#30 perform ADC conversions while executing code from flash memory?
Yes, the R5F104LLGFA#30's 10-bit ADC operates independently of CPU execution. Conversions can be triggered by software, timers, or ELC events, and results are stored in dedicated data registers or transferred via DTC - allowing concurrent analog acquisition and program execution without stalling the core.
What debug and programming interfaces are supported by the R5F104LLGFA#30?
The R5F104LLGFA#30 supports on-chip debugging via the single-wire debug interface (SWD) using pins P137/INTP0 and P121/X1. It also enables flash self-programming with boot swapping and flash shield window protection - allowing secure, field-upgradable firmware without external programmers.
R5F104LLGFA#30 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 64-LQFP
- Series:
- RL78/G14
- Packaging:
- Tray
- Product Status:
- Last Time Buy
- Programmable:
- Not Verified
- Core Processor:
- RL78
- Core Size:
- 16-Bit
- Speed:
- 32MHz
- Connectivity:
- CSI, I2C, LINbus, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 48
- Program Memory Size:
- 512KB (512K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 8K x 8
- RAM Size:
- 48K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.4V ~ 5.5V
- Data Converters:
- A/D 12x8/10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
R5F104LLGFA#30 FAQ
1.How can I place an order for R5F104LLGFA#30 through Aetrix?
Please submit a Request for Quotation (RFQ) for R5F104LLGFA#30 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for R5F104LLGFA#30 reliable?
The price and inventory of R5F104LLGFA#30 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for R5F104LLGFA#30 is usually 5 days.
3.What payment methods are accepted for R5F104LLGFA#30?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for R5F104LLGFA#30 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for R5F104LLGFA#30?
R5F104LLGFA#30 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your R5F104LLGFA#30 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for R5F104LLGFA#30?
For technical support, including R5F104LLGFA#30 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your R5F104LLGFA#30 requirements.
6.How does Aetrix verify that R5F104LLGFA#30 is sourced from the original manufacturer or authorized distributors?
All R5F104LLGFA#30 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that R5F104LLGFA#30 meets industry standards.
7.What is the process for return or replacement of R5F104LLGFA#30?
All R5F104LLGFA#30 units undergo pre-shipment inspection (PSI). If there is an issue with R5F104LLGFA#30, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The R5F104LLGFA#30 part is unused and in its original packaging.
Return procedure for R5F104LLGFA#30:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
R5F104LLGFA#30 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
