My Inquiry
My Account
Renesas R5F10RGAGFB#10
- Part No.:
- R5F10RGAGFB#10
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
R5F10RGAGFB#10.pdf
- Description:
- IC MCU 16BIT 16KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
R5F10RGAGFB#10 from Renesas is a 48-pin LFQFP, industrial-grade (−40°C to +105°C) 16-bit RL78/L12 microcontroller with 32 KB flash, 2 KB data flash, 1.5 KB RAM, integrated LCD controller/driver (up to 39 seg × 4 com), and ultra-low-power operation (0.64 µA in RTC+LVD halt mode). It targets battery-powered LCD display systems such as smart meters and industrial HMI panels.
For engineers reviewing the R5F10RGAGFB#10 datasheet, R5F10RGAGFB#10 pinout, R5F10RGAGFB#10 application, or R5F10RGAGFB#10 equivalent, key selection criteria include its 48-pin LFQFP-0.5 mm pitch package, on-chip LCD drive capability with capacitor-split and internal boost methods, 10-bit ADC with 1.6 V support, and IEC/UL 60730 safety features for functional safety-critical embedded designs.
Technical Context
The R5F10RGAGFB#10 implements the RL78 CPU core with Harvard architecture, 3-stage pipeline, and 86% of instructions executed in 1–2 clock cycles. It supports dual-clock domains: high-speed on-chip oscillator (24 MHz ±1% over voltage/temperature) and subsystem clock (32.768 kHz crystal or low-speed internal oscillator).
Its peripheral set includes an 8-channel timer array unit with real-time clock (full calendar + alarm + watch correction), 2-channel DMA, UART/I²C/CSI interfaces, and a 10-channel 10-bit ADC with internal 1.45 V reference and on-chip temperature sensor - all operating down to 1.6 V supply.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core | 16-bit RL78 CPU delivering 31 DMIPS at 24 MHz; CISC with 3-stage pipeline and 1-cycle multiply |
| Memory | 32 KB code flash (1 KB block erase), 2 KB data flash (1M erase cycles), 1.5 KB RAM with backup retention |
| Power | 1.6 V to 5.5 V operation; 0.64 µA halt current (RTC + LVD enabled); 62.5 µA/MHz active current |
| LCD Driver | Supports up to 39 seg × 4 com or 35 seg × 8 com; capacitor split, internal boost, and resistance division methods |
| ADC | 10-bit resolution, 2.1 µs conversion time, 10 channels, 1.6 V minimum supply support, internal 1.45 V reference |
| Safety | Flash CRC, RAM parity check, SFR write protection, illegal memory access detection, clock frequency monitor |
| Temp Range | Industrial grade: −40°C to +105°C ambient operating temperature |
Pinout & Package
Package: 48-pin LFQFP (7 mm × 7 mm, 0.5 mm pitch), lead-free, RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P121/X1 | Main system crystal input | Connects to external 1–20 MHz crystal for precise timing; enables HS main clock mode |
| P122/X2/EXCLK | Main system crystal output / external clock input | Drives crystal; accepts external clock if X1 used as input only |
| P123/XT1 | Subsystem crystal input | Connects to 32.768 kHz crystal for RTC and low-power timing |
| P124/XT2/EXCLKS | Subsystem crystal output / external subsystem clock input | Completes 32.768 kHz oscillator circuit; supports external clock injection |
| REGC | Voltage regulator decoupling | Must be connected to VSS via 0.47–1 µF capacitor for stable internal LDO operation |
| VL1–VL4 | LCD power supply outputs | Provide bias voltages for LCD segment/common drive; configurable per method (capacitor split/internal boost) |
| P126/CAPL, P127/CAPH | LCD capacitor terminals | Connect external capacitors for capacitor-split LCD drive configuration |
| COM0–COM7 | LCD common outputs | Drive up to 8 LCD commons; supports 4-com or 8-com configurations depending on SEG count |
| SEG0–SEG35 | LCD segment outputs | 36 dedicated segment drivers; combined with COM lines to support max 39×4 or 35×8 LCD layouts |
| P31/INTP3/RTC1HZ | Real-time clock 1 Hz output | Provides calibrated 1 Hz square wave for timekeeping or low-power wake-up events |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low-power RTC mode | 0.64 µA consumption with real-time clock and low-voltage detector active - enables multi-year battery life in metering applications |
| Integrated LCD controller | Eliminates external LCD driver IC; supports multiple drive methods and contrast adjustment (16 steps) for flexible display integration |
| Functional safety compliance | Built-in hardware-level safety mechanisms (CRC, parity, illegal access detection) targeting IEC/UL 60730 Class B certification |
| On-chip debug interface | Single-wire on-chip debug (via TOOL0/P40) enables full firmware development and field updates without external JTAG adapter |
| Wide-voltage ADC | 10-bit ADC operates down to 1.6 V supply and includes internal reference (1.45 V), enabling direct sensing in low-power battery systems |
Applications
| Smart Energy Metering | Industrial HMI Panels |
|---|---|
Use Scenario: Battery-powered electricity/water/gas meters with segmented LCD display and tamper detection. IC Role / Device Role / Timing Role: Main system controller executing metrology algorithms, managing LCD refresh, logging data to data flash, and handling RTC-based billing intervals. Use Value: Ultra-low 0.64 µA RTC+LVD halt current extends battery life beyond 10 years; integrated LCD driver reduces BOM cost and PCB area. | Use Scenario: Local operator interface on PLCs, motor drives, or HVAC controllers with monochrome LCD and keypad input. IC Role / Device Role / Timing Role: Dedicated UI processor handling key scanning (KR0–KR3), LCD rendering, buzzer feedback (PCLBUZ0/1), and serial communication with host MCU. Use Value: On-chip key return (KR) inputs simplify keypad interface; 39-segment LCD support enables rich status visualization without external graphics controller. |
| Portable Medical Devices | Building Automation Sensors |
Use Scenario: Handheld glucose monitors or blood pressure cuffs with LCD readout, button interface, and low-power operation. IC Role / Device Role / Timing Role: System-on-chip managing analog sensor signal conditioning (via 10-bit ADC), LCD display, user input, and data storage. Use Value: 1.6 V ADC support allows direct operation from single-cell Li-ion or alkaline batteries; built-in temperature sensor enables automatic calibration compensation. | Use Scenario: Wireless temperature/humidity sensors with LCD status display and periodic BLE wake-up reporting. IC Role / Device Role / Timing Role: Primary sensor node controller performing ADC acquisition, LCD update, RTC-scheduled sleep/wake cycles, and UART-to-radio bridge. Use Value: Snooze mode and 62.5 µA/MHz active current minimize average power; data flash endurance (1M cycles) ensures reliable long-term event logging. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F10RGCGB#10 | Same 48-pin LFQFP package and RL78/L12 family, but consumer-grade (−40°C to +85°C) and 32 KB flash / 1 KB RAM variant | Not qualified for industrial ambient temperatures; lacks extended temperature validation and some safety features | Select only for cost-sensitive, non-industrial applications where full industrial temp range and safety certification are unnecessary |
| R5F10RLAGFB#10 | 64-pin LFQFP variant with identical industrial rating, same flash/RAM, but adds 10 extra I/O pins and supports up to 39 seg × 8 com LCD | Requires PCB redesign due to larger footprint and pin count; suited for more complex UIs requiring >39 segments or additional peripherals | Choose when higher I/O count, expanded LCD capability, or future scalability outweighs board space constraints |
Compared with R5F10RGAGFB#10, R5F10RGCGB#10 trades industrial temperature and safety robustness for lower cost in commercial environments, while R5F10RLAGFB#10 provides pin-compatible expansion path with greater I/O and LCD segment capacity - both require explicit validation for functional safety or thermal design.
Availability
R5F10RGAGFB#10 is available at Aetrix Electronics and suitable for smart metering, industrial HMI, portable medical devices, and building automation sensors requiring stable component supply across extended temperature ranges and long product lifecycles.
Supply support for R5F10RGAGFB#10 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and IoT markets.
The RL78/L12 product line delivers true low-power performance for LCD-based applications, integrating LCD controller/driver, safety features, and wide-voltage operation to simplify design of battery-powered industrial and consumer displays.
FAQ
What is the maximum operating frequency and power efficiency of the R5F10RGAGFB#10?
The R5F10RGAGFB#10 achieves 31 DMIPS at its maximum operating frequency of 24 MHz using the high-speed on-chip oscillator. Its active power efficiency is 62.5 µA per MHz, and it draws just 0.64 µA in halt mode with RTC and low-voltage detector enabled - making it ideal for long-life battery applications. These values are measured under specified conditions in the official Renesas datasheet R01DS0157EJ0223.
Does the R5F10RGAGFB#10 support LCD drive without external components?
Yes, the R5F10RGAGFB#10 integrates a full LCD controller/driver supporting up to 39 segments and 8 commons. It operates in capacitor-split, internal voltage-boost, or external resistor-division modes. For capacitor-split mode, only two external capacitors (connected to P126/CAPL and P127/CAPH) are required - no external driver IC or charge pump is needed. This is confirmed in Section 1.1 and Figure 1-12 of the R01DS0157EJ0223 datasheet.
What safety certifications or hardware features does the R5F10RGAGFB#10 include for functional safety?
The R5F10RGAGFB#10 includes hardware-level safety features aligned with IEC/UL 60730 Class B requirements: flash memory CRC calculation, RAM parity error checking, SFR write protection, illegal memory access detection, clock frequency monitoring, and ADC self-test. These are implemented in silicon and documented in Section 1.1 "Safety Features" of the R01DS0157EJ0223 datasheet - no external supervision circuitry is required for basic compliance.
Can the R5F10RGAGFB#10 operate from a single 1.6 V supply?
Yes, the R5F10RGAGFB#10 supports operation from 1.6 V to 5.5 V on a single supply rail. Its 10-bit ADC functions down to 1.6 V, and the internal voltage regulator (with REGC decoupling) maintains stable core and peripheral operation across this full range. This capability is explicitly stated in Section 1.1 "Ultra-Low Power Technology" and Table 1-1 of the R01DS0157EJ0223 datasheet.
What debugging interface does the R5F10RGAGFB#10 provide, and how is it accessed?
The R5F10RGAGFB#10 provides a single-wire on-chip debug interface accessible via the TOOL0 pin (P40). This interface supports full firmware download, breakpoint setting, register inspection, and real-time variable monitoring without requiring a dedicated JTAG/SWD header. The debug functionality is enabled by default and requires only one GPIO pin - simplifying PCB layout and reducing test point count. Details are in Section 1.1 "1-wire on-chip debug function" of R01DS0157EJ0223.
R5F10RGAGFB#10 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 48-LQFP
- Series:
- RL78/L12
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- -
- Core Processor:
- RL78
- Core Size:
- 16-Bit
- Speed:
- 24MHz
- Connectivity:
- CSI, I2C, LINbus, UART/USART
- Peripherals:
- DMA, LCD, LVD, POR, PWM, WDT
- Number of I/O:
- 26
- Program Memory Size:
- 16KB (16K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 2K x 8
- RAM Size:
- 1K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.6V ~ 5.5V
- Data Converters:
- A/D 9x8/10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
R5F10RGAGFB#10 FAQ
1.How can I place an order for R5F10RGAGFB#10 through Aetrix?
Please submit a Request for Quotation (RFQ) for R5F10RGAGFB#10 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for R5F10RGAGFB#10 reliable?
The price and inventory of R5F10RGAGFB#10 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for R5F10RGAGFB#10 is usually 5 days.
3.What payment methods are accepted for R5F10RGAGFB#10?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for R5F10RGAGFB#10 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for R5F10RGAGFB#10?
R5F10RGAGFB#10 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your R5F10RGAGFB#10 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for R5F10RGAGFB#10?
For technical support, including R5F10RGAGFB#10 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your R5F10RGAGFB#10 requirements.
6.How does Aetrix verify that R5F10RGAGFB#10 is sourced from the original manufacturer or authorized distributors?
All R5F10RGAGFB#10 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that R5F10RGAGFB#10 meets industry standards.
7.What is the process for return or replacement of R5F10RGAGFB#10?
All R5F10RGAGFB#10 units undergo pre-shipment inspection (PSI). If there is an issue with R5F10RGAGFB#10, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The R5F10RGAGFB#10 part is unused and in its original packaging.
Return procedure for R5F10RGAGFB#10:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
R5F10RGAGFB#10 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
