My Inquiry
My Account
Renesas R5F10WLGAFA#30
- Part No.:
- R5F10WLGAFA#30
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 64-LQFP
- Datasheet:
-
R5F10WLGAFA#30.pdf
- Description:
- IC MCU 16BIT 128KB FLASH 64LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:694
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
R5F10WLGAFA#30 from Renesas is a 64-pin LQFP (12 × 12 mm, 0.65 mm pitch), 128 KB Flash, 8 KB RAM, RL78/L13 16-bit MCU with integrated LCD controller/driver (36 segment / 4 common outputs), ultra-low power operation (71 μA/MHz active, 0.61 μA RTC+LVD standby), and 24 MHz max CPU speed - designed for battery-powered LCD-based consumer instrumentation.
For engineers reviewing the R5F10WLGAFA#30 datasheet, R5F10WLGAFA#30 pinout, R5F10WLGAFA#30 application, or R5F10WLGAFA#30 equivalent, this page delivers verified electrical specs, validated 64-pin LQFP terminal mapping, real-world LCD timing constraints, and direct alternative part comparisons for rapid embedded design validation and BOM optimization.
Technical Context
The R5F10WLGAFA#30 implements the RL78 CPU core with CISC architecture, 3-stage pipeline, and 1 MB address space. It supports dual-clock domains: high-speed main system clock (up to 24 MHz via on-chip oscillator or external crystal) and independent 32.768 kHz subsystem clock for RTC2 and low-power modes.
Its integrated LCD controller supports internal voltage boosting, capacitor-split, or external resistor-divider biasing methods, with programmable segment/common drive capability and dedicated VL1–VL4 power rails. The device includes two comparators with selectable internal/external reference inputs and full peripheral I/O redirection via PIOR register.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core | RL78 16-bit CISC CPU with 3-stage pipeline, 31 DMIPS @ 24 MHz |
| Memory | 128 KB code flash (1 KB blocks), 4 KB data flash (1M rewrite cycles), 8 KB RAM |
| Power | 1.6 V to 5.5 V operation; 71 μA/MHz active current; 0.61 μA RTC+LVD in STOP mode |
| LCD Driver | 36 segment / 4 common outputs; switchable bias method (internal boost, capacitor split, resistor division) |
| Peripherals | 8-channel 16-bit timer array (TAU), 1× 16-bit KB20 timer, 2× comparators, 9-channel 8/10-bit ADC, 3× UART (1 LIN-capable), 2× CSI, 1× I2C, 4-channel DMA |
| Package | 64-pin LQFP, 12 × 12 mm, 0.65 mm pitch, RoHS-compliant |
| Temp Range | −40°C to +85°C (Consumer grade A specification) |
Pinout & Package
64-pin plastic LQFP (12 × 12 mm, 0.65 mm pitch), JEDEC standard PLQP0064JA-A / PLQP0064JB-A footprint. REGC requires 0.47–1 μF capacitor to VSS.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P00–P07 | Port 0 digital I/O | Includes SO00/TxD0, TOOLTxD, SEG43–SEG46, RxD2, VCOUT0 - primary serial and LCD segment interface |
| P10–P17 | Port 1 analog/digital I/O | Hosts ANI22–ANI25, SEG35–SEG42, SCK00/SCL00, SI00/RxD0/SDA00 - ADC input and I2C master interface |
| P20–P27 | Port 2 analog I/O | Contains ANI0/AVREFP, ANI1/AVREFM, ANI16–ANI21, SEG29/SEG33–SEG34 - precision reference and multi-channel sensing |
| P30–P33 | Port 3 HMI/timer I/O | Provides SEG20–SEG23, RTC1HZ, INTP3/INTP4, TI03/TO03/REMOOUT - real-time clock output and remote control carrier generation |
| COM0–COM7 | LCD common outputs | COM0–COM3 active for 4-common configuration; COM4–COM7 multiplexed as SEG0–SEG3 - defines LCD multiplex ratio and bias topology |
| VL1–VL4 | LCD power supply rails | Independent voltage supplies for LCD segment driving; require external filtering per bias method selection |
| REGC | Voltage regulator decoupling | Must connect 0.47–1 μF capacitor to VSS; critical for stable internal LDO operation and LCD voltage accuracy |
Key Features
| Feature | Design Value |
|---|---|
| Ultra-low power HALT/STOP/SNOOZE modes | Enables sub-μA retention with RTC + LVD active - essential for 10+ year battery life in portable meters |
| Configurable LCD bias architecture | Supports internal charge pump, capacitor-split, or external resistor divider - eliminates need for external LCD bias IC |
| Peripheral I/O redirection (PIOR) | Allows dynamic remapping of UART, CSI, I2C, and timer pins to alternate ports - increases PCB layout flexibility and reuse |
| Background data flash rewriting (BGO) | Executes code from main flash while updating 4 KB data flash - enables field firmware updates without interrupting operation |
| Dual-reference comparator system | Each comparator accepts internal (1.45 V) or external reference; supports window, high-speed, and low-speed modes - ideal for battery monitoring and threshold detection |
Applications
| Smart Energy Meter | Portable Medical Device |
|---|---|
Use Scenario: Battery-powered electricity meter with segmented LCD display, real-time tariff tracking, and tamper detection. IC Role / Device Role / Timing Role: Primary system controller managing LCD refresh at 60 Hz, RTC calendar, 32.768 kHz timekeeping, and low-power wake-up on pulse input. Use Value: Integrated LCD driver eliminates external bias IC; 0.61 μA STOP mode extends CR2032 battery life beyond 12 years. |
Use Scenario: Handheld blood glucose monitor with 4-digit LCD, button interface, and USB charging status indication. IC Role / Device Role / Timing Role: Central MCU handling ADC sampling of test strip signal, key interrupt scanning, buzzer feedback, and segmented LCD update. Use Value: On-chip 1.45 V reference and dual comparators enable precise strip voltage thresholding; 8/10-bit ADC resolves <1 mV changes. |
| Home Appliance Control Panel | Industrial Sensor Display Unit |
Use Scenario: Microwave oven control panel with 3-line segmented LCD, rotary encoder input, and safety interlock monitoring. IC Role / Device Role / Timing Role: HMI processor driving LCD segments, decoding KR0–KR7 key returns, generating PWM for buzzer, and polling door switches. Use Value: Key interrupt function scans 8-key matrix with no CPU overhead; N-ch open-drain I/O interfaces directly with 3.3 V logic and 5 V displays. |
Use Scenario: DIN-rail mounted temperature/humidity display with local sensor readout, RS-485 communication, and backup RTC. IC Role / Device Role / Timing Role: Local display controller receiving Modbus RTU over UART1, updating LCD every 2 s, and maintaining accurate time via RTC2 with auto-correction. Use Value: Dual UART support enables simultaneous host communication and local debug port; 12-bit interval timer ensures precise 2 s display refresh intervals. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F10WLGAFB#30 | Same die, 64-pin LFQFP (10 × 10 mm, 0.5 mm pitch); identical Flash/RAM/peripherals | Requires tighter PCB layout due to finer pitch; same LCD and power specs | Select when board space is constrained and LFQFP assembly capability exists |
| R5F10WMGAFA#30 | 80-pin LQFP variant with +16 I/O pins, +3 UART channels, +3 ADC inputs, and 51-segment LCD support | Enables larger LCDs and additional sensors; higher pin count increases PCB area and routing complexity | Choose when expanding HMI functionality or adding RS-485/UART3 is required |
Compared with R5F10WLGAFA#30, R5F10WLGAFB#30 offers identical functionality in a smaller footprint but demands higher-precision assembly, while R5F10WMGAFA#30 provides scalable I/O and LCD capacity at the cost of increased board size and BOM count.
Availability
R5F10WLGAFA#30 is available at Aetrix Electronics and suitable for smart energy meters, portable medical devices, and home appliance control panels requiring stable component supply, long-term lifecycle assurance, and RoHS-compliant manufacturing.
Supply support for R5F10WLGAFA#30 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and IoT markets.
The RL78/L13 product line targets ultra-low-power LCD-based applications, integrating true low-power architecture, on-chip LCD driving, and robust peripheral sets for cost-sensitive consumer and industrial instrumentation.
FAQ
What is the maximum operating frequency and corresponding power consumption of the R5F10WLGAFA#30?
The R5F10WLGAFA#30 operates up to 24 MHz using its high-speed on-chip oscillator with ±1.0% accuracy across VDD = 1.8–5.5 V and TA = −20 to +85°C. At this frequency, active current is 71 μA/MHz (typical), equating to ~1.7 mA total at 24 MHz - verified in the Electrical Specifications section of R01DS0168EJ0232 Rev.2.32.
Does the R5F10WLGAFA#30 support hardware-based LCD bias generation without external components?
Yes, the R5F10WLGAFA#30 integrates an internal voltage boosting circuit for LCD bias, enabling direct drive of 36-segment/4-common displays without external charge pumps. Configuration is done via LCD control registers; capacitor-split and external resistor-divider modes are also supported for flexible display compatibility.
How many UART interfaces does the R5F10WLGAFA#30 include, and which support LIN bus protocol?
The R5F10WLGAFA#30 includes three UART channels. UART0 (RxD0/TxD0) and UART1 (RxD1/TxD1) are fully functional; UART2 (RxD2/TxD2) supports LIN bus physical layer compliance including LINSEL pin control and break-detection timing - confirmed in Section 1.1 Features and Table 1-1 of the datasheet.
What is the exact Flash and RAM configuration of the R5F10WLGAFA#30?
The R5F10WLGAFA#30 contains 128 KB of code flash memory (organized in 1 KB erasable blocks), 4 KB of data flash memory rated for 1,000,000 write cycles, and 8 KB of on-chip RAM - as specified in the "ROM, RAM capacities" table on Page 2 of R01DS0168EJ0232 Rev.2.32.
Can the R5F10WLGAFA#30 operate reliably at 1.6 V supply voltage?
Yes, the R5F10WLGAFA#30 is fully specified for 1.6 V to 5.5 V operation across −40°C to +85°C. At 1.6 V, it supports LV (low-voltage) mode up to 4 MHz CPU speed and retains all core peripherals including LCD controller, RTC2, and comparators - per Section 1.1 and Table 1-3 in the datasheet.
R5F10WLGAFA#30 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 64-LQFP
- Series:
- RL78/L13
- Packaging:
- Tray
- Product Status:
- Last Time Buy
- Programmable:
- Not Verified
- Core Processor:
- RL78
- Core Size:
- 16-Bit
- Speed:
- 24MHz
- Connectivity:
- CSI, I2C, LINbus, UART/USART
- Peripherals:
- DMA, LCD, LVD, POR, PWM, WDT
- Number of I/O:
- 42
- Program Memory Size:
- 128KB (128K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 4K x 8
- RAM Size:
- 8K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.6V ~ 5.5V
- Data Converters:
- A/D 9x10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
R5F10WLGAFA#30 FAQ
1.How can I place an order for R5F10WLGAFA#30 through Aetrix?
Please submit a Request for Quotation (RFQ) for R5F10WLGAFA#30 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for R5F10WLGAFA#30 reliable?
The price and inventory of R5F10WLGAFA#30 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for R5F10WLGAFA#30 is usually 5 days.
3.What payment methods are accepted for R5F10WLGAFA#30?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for R5F10WLGAFA#30 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for R5F10WLGAFA#30?
R5F10WLGAFA#30 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your R5F10WLGAFA#30 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for R5F10WLGAFA#30?
For technical support, including R5F10WLGAFA#30 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your R5F10WLGAFA#30 requirements.
6.How does Aetrix verify that R5F10WLGAFA#30 is sourced from the original manufacturer or authorized distributors?
All R5F10WLGAFA#30 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that R5F10WLGAFA#30 meets industry standards.
7.What is the process for return or replacement of R5F10WLGAFA#30?
All R5F10WLGAFA#30 units undergo pre-shipment inspection (PSI). If there is an issue with R5F10WLGAFA#30, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The R5F10WLGAFA#30 part is unused and in its original packaging.
Return procedure for R5F10WLGAFA#30:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
R5F10WLGAFA#30 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
