My Inquiry
My Account
Renesas R5F212A8SNFP#X6
- Part No.:
- R5F212A8SNFP#X6
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 64-LQFP
- Datasheet:
-
R5F212A8SNFP#X6.pdf
- Description:
- IC MCU 16BIT 64KB FLASH 64LFQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,612
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
R5F212A8SNFP#X6 from Renesas Electronics is a 16-bit R8C/Tiny Series MCU with 64 KB flash ROM, 3 KB RAM, and 12-channel 10-bit A/D converter, designed for embedded control in consumer and industrial appliances requiring low-power operation and integrated peripherals including UART×3, I²C, LIN, and multi-mode PWM timers.
For engineers reviewing the R5F212A8SNFP#X6 datasheet, R5F212A8SNFP#X6 pinout, R5F212A8SNFP#X6 application, or R5F212A8SNFP#X6 equivalent, key selection criteria include operating temperature range (−20°C to +85°C), 64-pin LQFP package (PLQP0064KB-A), flash endurance (1,000 write/erase cycles), and hardware LIN support via UART0 and Timer RA.
Technical Context
The R5F212A8SNFP#X6 implements the R8C/Tiny CPU core with 89 fundamental instructions and a 16×16→32-bit hardware multiplier, enabling efficient signal processing and real-time control. It supports single-chip mode with 1 Mbyte address space and executes instructions in as little as 50 ns at 20 MHz.
Its peripheral set includes Timer RD (16-bit ×2, 6-pin PWM, three-phase waveform generation), Timer RC (16-bit, 4 capture/compare registers), and dual 8-bit D/A converters - all synchronized to a flexible clock system with XIN, XCIN (32 kHz), and adjustable high-speed on-chip oscillator.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | R8C/Tiny series: 89 instructions, 16×16→32-bit multiplier, 1 Mbyte address space |
| Memory | 64 KB flash ROM, 3 KB RAM - sufficient for mid-complexity appliance firmware with data logging |
| A/D Converter | 10-bit resolution × 12 channels with sample-and-hold - supports analog sensor interfacing without external circuitry |
| Timers | Timer RD (16-bit ×2, 6-pin PWM, complementary/sawtooth/triangular modulation) enables motor control |
| Serial Interfaces | UART×3, I²C (shared with SSU), hardware LIN (UART0 + Timer RA) - simplifies automotive body electronics integration |
| Power Modes | Wait mode (2.1 µA @ 3 V, 32 kHz XCIN), stop mode (0.65 µA) - extends battery life in standby applications |
| Operating Range | −20°C to +85°C, VCC = 2.2–5.5 V - suitable for commercial-grade home and office equipment |
Pinout & Package
Package: 64-pin LQFP (PLQP0064KB-A), 0.5 mm pitch, 10 mm × 10 mm body - compatible with standard surface-mount assembly and reflow profiles.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P0_0–P0_7 | Analog input / D/A output | AN0–AN7 and DA0/DA1 pins - enable direct connection to sensors and analog actuators |
| P1_0–P1_7 | General I/O / Keypad input / UART | KI0–KI3, RXD0/TXD0, INT1 - supports matrix keypad scanning and serial host communication |
| P2_0–P2_7 | Timer RD I/O / Three-phase PWM | TRDIOA0–TRDIOD1 - dedicated pins for 6-pin complementary PWM output in motor drive applications |
| P3_0–P3_7 | Timer A/B/O, I²C, SSU | TRAO/TRBO, SCL/SDA, SSO/SSCK - integrates timing, bus communication, and synchronous serial control |
| P4_3–P4_7 | Clock inputs / Reset | XCIN/XCOUT (32 kHz RTC), XIN/XOUT (main crystal), RESET - provides robust clocking and reliable startup |
Key Features
| Feature | Design Value |
|---|---|
| Hardware LIN Module | Integrated LIN 2.0 support via UART0 + Timer RA - eliminates external transceiver for basic automotive sub-node control |
| Real-Time Clock (Timer RE) | 8-bit timer with calendar function (seconds/minutes/hours/days of week) - enables time-stamped event logging without external RTC |
| Multi-Mode PWM Timers | Timer RD supports reset-synchronous, complementary, and PWM2/PWM3 modes - delivers precise three-phase motor commutation |
| Low-Voltage Operation | Operates down to 2.2 V at 5 MHz - maintains functionality in brown-out conditions common in battery-powered systems |
| On-Chip Debug | Fully supported via single-wire interface - enables in-system programming and real-time debugging without JTAG header |
Applications
| Home Appliance Control | Office Equipment Motor Drive |
|---|---|
|
Use Scenario: Microcontroller unit in washing machine main board managing water valve, pump, heater, and display. IC Role / Device Role / Timing Role: Central controller executing state-machine logic, reading temperature/level sensors, and generating PWM for brushless drum motor. Use Value: Integrated 6-pin complementary PWM (Timer RD) directly drives 3-phase inverter; 12-channel A/D reads thermistors and pressure sensors without external mux. |
Use Scenario: Embedded controller in multifunction printer managing paper feed, scanner illumination, and toner dispensing. IC Role / Device Role / Timing Role: Real-time motion sequencer coordinating stepper motors and solenoids using Timer RB one-shot and Timer RC capture functions. Use Value: Hardware LIN interface communicates with power supply module; 3 KB RAM buffers image scan data before USB transfer. |
| Audio System Front Panel | Industrial Sensor Hub |
|
Use Scenario: User interface processor in AV receiver handling IR remote decoding, button press detection, and LED display updates. IC Role / Device Role / Timing Role: Peripheral coordinator managing UART for system bus, I²C for EEPROM, and keypad scan via KI0–KI3 inputs. Use Value: 55 CMOS I/O ports with selectable pull-up resistors eliminate external bias components; low-power wait mode reduces idle consumption to 2.1 µA. |
Use Scenario: Data acquisition node in factory automation collecting temperature, humidity, and vibration readings for edge preprocessing. IC Role / Device Role / Timing Role: Sensor fusion engine running calibration algorithms and transmitting aggregated data via UART2 to gateway. Use Value: On-chip 10-bit A/D with sample-and-hold handles multiplexed analog inputs; flash security (ROM code protect + ID check) prevents firmware tampering. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F212A7SNFP | 48 KB flash, 2.5 KB RAM - 16 KB less program memory, identical peripherals and package | Suitable for simpler firmware with smaller code footprint; no change in I/O or timing capability | Select when application firmware fits within 48 KB and cost optimization is prioritized over future scalability |
| R5F212B8SNFP | Includes 1 KB ×2 on-chip data flash (10,000-cycle endurance) - absent in R5F212A8SNFP#X6 | Required for applications needing frequent nonvolatile parameter storage (e.g., calibration tables, usage logs) | Choose only if data flash persistence exceeds EEPROM or external SPI flash requirements; otherwise R5F212A8SNFP#X6 offers better cost/performance balance |
Compared with R5F212A7SNFP, R5F212A8SNFP#X6 provides 16 KB additional flash for feature-rich firmware; compared with R5F212B8SNFP, it omits data flash but retains identical program execution capability and lower cost for fixed-parameter systems.
Availability
R5F212A8SNFP#X6 is available at Aetrix Electronics and suitable for home appliance control, office equipment motor drive, and industrial sensor hub applications requiring stable component supply across long-lifecycle production programs.
Supply support for R5F212A8SNFP#X6 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, and power solutions for automotive, industrial, and consumer markets.
The R8C/2A Group, including R5F212A8SNFP#X6, was engineered for cost-sensitive, low-power embedded control in commercial appliances and office equipment - emphasizing integration, noise immunity, and ease of debug.
FAQ
What is the maximum operating frequency and voltage range for R5F212A8SNFP#X6?
R5F212A8SNFP#X6 operates up to 20 MHz at VCC = 3.0–5.5 V, 10 MHz at 2.7–5.5 V, and 5 MHz at 2.2–5.5 V. Its minimum instruction execution time is 50 ns under full-spec conditions. This graded frequency/voltage scaling allows design flexibility across battery-powered and line-powered systems while maintaining deterministic timing behavior in R5F212A8SNFP#X6-based products.
Does R5F212A8SNFP#X6 support hardware LIN communication?
Yes, R5F212A8SNFP#X6 includes a dedicated hardware LIN module implemented using UART0 and Timer RA, supporting LIN 2.0 physical layer signaling and protocol timing. This eliminates software bit-banging overhead and ensures reliable frame transmission/reception in automotive body electronics and industrial sub-nodes where R5F212A8SNFP#X6 serves as a slave controller.
What package type and pin count does R5F212A8SNFP#X6 use?
R5F212A8SNFP#X6 uses a 64-pin LQFP package with code PLQP0064KB-A (0.5 mm pitch, 10 mm × 10 mm body). This package is pin-compatible with other R8C/2A Group members like R5F212A7SNFP and R5F212AASNFP, enabling scalable design reuse. The pinout is fully documented in Figures 1.4 and Table 1.7 of the R8C/2A Group datasheet for R5F212A8SNFP#X6.
How much A/D and D/A conversion capability does R5F212A8SNFP#X6 provide?
R5F212A8SNFP#X6 integrates a 10-bit A/D converter with 12 input channels (AN0–AN11) and two independent 8-bit D/A converters (DA0, DA1). The A/D includes sample-and-hold for accurate multi-channel acquisition, while the D/A outputs support analog feedback loops or reference generation - all without external converters in R5F212A8SNFP#X6-based control systems.
Is on-chip debug supported for R5F212A8SNFP#X6, and what interface is used?
Yes, R5F212A8SNFP#X6 supports full on-chip debug via a single-wire interface compliant with Renesas' FINE protocol. This enables non-intrusive breakpoint setting, register inspection, and flash programming without requiring a dedicated JTAG header or additional pins - streamlining development and field firmware updates for R5F212A8SNFP#X6 deployments.
R5F212A8SNFP#X6 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 64-LQFP
- Series:
- R8C/2x/2A
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- R8C
- Core Size:
- 16-Bit
- Speed:
- 20MHz
- Connectivity:
- I2C, LINbus, SIO, SSU, UART/USART
- Peripherals:
- POR, PWM, Voltage Detect, WDT
- Number of I/O:
- 55
- Program Memory Size:
- 64KB (64K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 3K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.2V ~ 5.5V
- Data Converters:
- A/D 12x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -20°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
R5F212A8SNFP#X6 FAQ
1.How can I place an order for R5F212A8SNFP#X6 through Aetrix?
Please submit a Request for Quotation (RFQ) for R5F212A8SNFP#X6 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for R5F212A8SNFP#X6 reliable?
The price and inventory of R5F212A8SNFP#X6 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for R5F212A8SNFP#X6 is usually 5 days.
3.What payment methods are accepted for R5F212A8SNFP#X6?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for R5F212A8SNFP#X6 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for R5F212A8SNFP#X6?
R5F212A8SNFP#X6 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your R5F212A8SNFP#X6 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for R5F212A8SNFP#X6?
For technical support, including R5F212A8SNFP#X6 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your R5F212A8SNFP#X6 requirements.
6.How does Aetrix verify that R5F212A8SNFP#X6 is sourced from the original manufacturer or authorized distributors?
All R5F212A8SNFP#X6 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that R5F212A8SNFP#X6 meets industry standards.
7.What is the process for return or replacement of R5F212A8SNFP#X6?
All R5F212A8SNFP#X6 units undergo pre-shipment inspection (PSI). If there is an issue with R5F212A8SNFP#X6, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The R5F212A8SNFP#X6 part is unused and in its original packaging.
Return procedure for R5F212A8SNFP#X6:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
R5F212A8SNFP#X6 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
