Renesas R5F563TCEDFH#V0

Overview

R5F563TCEDFH#V0 from Renesas Electronics is a 100-MHz 32-bit RX MCU with integrated FPU, 384 KB on-chip flash, 32 KB SRAM, dual 12-bit ADCs (with programmable gain amplifiers and window comparators), one 10-bit 20-channel ADC, two 10-bit DACs, CAN interface, USB 2.0 full-speed, and dedicated digital power supply controller (DPC) for switched-mode power supply control - deployed in motor drive and digital power conversion systems.

For engineers reviewing the R5F563TCEDFH#V0 datasheet, R5F563TCEDFH#V0 pinout, R5F563TCEDFH#V0 application, or R5F563TCEDFH#V0 equivalent, key selection criteria include its 112-pin LQFP package (PLQP0112JA-A), –40°C to +85°C operating range, CAN-enabled variant with DPC acceleration, and PWM delay resolution down to 312 ps at 100 MHz for precise timing in power stage control loops.

Technical Context

The R5F563TCEDFH#V0 implements the RXv1 CPU core with IEEE-754 single-precision FPU, 165 DMIPS performance, and memory protection unit (MPU). It integrates two independent 12-bit ADC units (each with three sample-and-hold circuits, double data registers, and amplifier/comparator support) plus one 10-bit 20-channel ADC running at 100 MHz ADCLK.

Its timer subsystem includes eight MTU3 channels (supporting three-phase complementary PWM with automatic dead-time insertion) and eight GPT channels (with PWM delay generation up to 312 ps resolution), all synchronized to PCLKA at 100 MHz. The DPC unit performs fixed-point compensatory calculations using ADC measurement results for real-time digital power control.

Key Specifications

Pinout & Package

Package: 112-pin LQFP (PLQP0112JA-A), 20 × 20 mm body, 0.65 mm pitch, exposed pad not present, moisture sensitivity level (MSL) 3 per JEDEC J-STD-020.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar microcontroller applications.

Compared with R5F563TCEDFH#V0, R5F563TEADFH#V0 offers greater memory headroom for advanced control firmware, while R5F563TCDDFH#V0 removes CAN functionality to lower cost-both retain identical DPC acceleration, 100 MHz PWM timing, and dual 12-bit ADC architecture for digital power and motor control continuity.

Availability

R5F563TCEDFH#V0 is available at Aetrix Electronics and suitable for industrial motor drives, digital power supplies, and safety-critical appliance control systems requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.

Supply support for R5F563TCEDFH#V0 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Renesas Electronics is a global semiconductor leader specializing in microcontrollers, analog, and power solutions for automotive, industrial, and IoT markets.

The RX63T Group - including R5F563TCEDFH#V0 - was designed specifically for high-precision digital power conversion and real-time motor control, integrating hardware accelerators like DPC and precision PWM timing to replace discrete analog control circuits.

FAQ

What is the maximum operating frequency and CPU performance of the R5F563TCEDFH#V0?

The R5F563TCEDFH#V0 operates at a maximum frequency of 100 MHz and delivers 165 DMIPS of processing performance using the RXv1 32-bit CPU core with integrated IEEE-754 single-precision floating-point unit. Its instruction set includes DSP extensions and a memory protection unit (MPU) for robust real-time execution. This performance level enables deterministic execution of complex motor control algorithms and digital power supply compensators within tight timing budgets.

Does the R5F563TCEDFH#V0 include a CAN interface, and what version is supported?

Yes, the R5F563TCEDFH#V0 includes a CAN module compliant with ISO 11898-1, supporting both standard (11-bit) and extended (29-bit) frame formats. It provides 32 configurable mailboxes for efficient message filtering and reception. The CAN peripheral is fully integrated - no external transceiver is required beyond the standard CANH/CANL physical layer components - making it suitable for industrial fieldbus communication in motor drives and power converters.

What ADC resources does the R5F563TCEDFH#V0 provide for precision sensing?

The R5F563TCEDFH#V0 integrates two independent 12-bit S12ADB ADC units (4 channels each, with programmable gain amplifiers and window comparators) and one 10-bit ADA unit with 20 input channels. All ADCs support simultaneous sampling across up to 7 channels using hardware triggers from MTU3 or GPT timers. Conversion times are 1.0 µs per channel (S12ADB @ 50 MHz ADCLK) and 0.5 µs per channel (ADA @ 100 MHz ADCLK), enabling high-fidelity current/voltage acquisition in fast-switching power stages.

How does the Digital Power Supply Controller (DPC) function in the R5F563TCEDFH#V0?

The DPC in the R5F563TCEDFH#V0 is a dedicated 16-bit fixed-point calculation unit that accelerates digital control loop computations for switched-mode power supplies. It accepts raw 10-bit ADC measurements directly and executes compensator equations (e.g., PID, lead-lag) in hardware with sub-100 ns latency. This offloads the main CPU, improves loop stability, and enables higher switching frequencies - critical for modern GaN/SiC-based power designs where timing margins are extremely tight.

What package type and pin count does the R5F563TCEDFH#V0 use?

The R5F563TCEDFH#V0 is housed in a 112-pin LQFP package designated PLQP0112JA-A, measuring 20 × 20 mm with 0.65 mm pitch. It provides 69 GPIO pins (including 21 inputs and 20 open-drain outputs), dedicated analog supply pins (AVCC0/AVSS), and full peripheral signal routing for CAN, USB, multiple SCI, RSPI, and RIIC interfaces. This package balances I/O density with thermal performance for industrial power and motor control PCB layouts.