My Inquiry
My Account
Renesas R5F64175DFB#U0
- Part No.:
- R5F64175DFB#U0
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 100-LQFP
- Datasheet:
-
R5F64175DFB#U0.pdf
- Description:
- IC MCU 16/32BIT 384KB 100LFQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,852
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
R5F64175DFB#U0 from Renesas Electronics is a 64 MHz high-performance 32-bit CISC microcontroller in the R32C/117 Group, featuring 384 KB flash, 40 KB RAM, IEEE-754 single-precision FPU, 9-channel UART, CAN 2.0B module (32 mailboxes), and 34-channel 10-bit ADC - deployed in automotive audio subsystems and industrial motor control interfaces.
For engineers reviewing the R5F64175DFB#U0 datasheet, R5F64175DFB#U0 pinout, R5F64175DFB#U0 application, or R5F64175DFB#U0 equivalent, key selection criteria include CAN timing compliance with ISO 11898-1, 144-pin LQFP package thermal performance at -40°C to +85°C, integrated DMAC II for real-time waveform generation, and on-chip debug support for flash programming.
Technical Context
The R5F64175DFB#U0 implements the R32C/100 Series CPU core with 32-bit barrel shifter, 32×32→64-bit multiplier, and multiply-accumulate unit. It supports memory expansion mode and microprocessor mode via configurable external bus interface with 4 chip selects and 8/16/32-bit data width.
Its peripheral set includes three-phase motor control timer (using TA1–TA4 and TB2), 8-bit programmable dead-time generator, CRC-CCITT calculator, and intelligent I/O supporting 16-bit input capture (16 channels) and 16-bit output compare (24 channels in 144-pin variant).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | R32C/100 Series 32-bit CISC with 108 basic instructions and 15.625 ns min. instruction time at 64 MHz |
| Flash / RAM | 384 KB flash + 8 KB data flash; 40 KB RAM - sufficient for real-time motor control firmware with dual-bank update capability |
| ADC | 10-bit resolution × 34 channels with sample-and-hold - enables simultaneous sampling of multi-axis current/voltage feedback |
| CAN Interface | ISO 11898-1 compliant CAN 2.0B controller with 32 dedicated mailboxes and hardware message filtering |
| Operating Temp | -40°C to +85°C (D version) - qualified for under-hood automotive audio amplifier modules and industrial PLC I/O cards |
| Package | 144-pin plastic LQFP (PLQP0144KA-A), 20 mm × 20 mm × 1.4 mm - supports standard reflow profiles and thermal vias for 45 mA active current dissipation |
| Debug Support | On-chip debug interface with flash programming capability - eliminates need for external emulator during field firmware updates |
Pinout & Package
144-pin plastic molded LQFP (PLQP0144KA-A), 0.5 mm pitch, exposed pad optional. Thermal resistance θJA = 35°C/W typical.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P8_2 / P8_3 | CAN0OUT / CAN0IN | Dedicated differential CAN transceiver interface pins with internal pull-ups and slew-rate control |
| P7_0 / P7_1 | TXD2/SDA2 / RXD2/SCL2 | Shared UART2/I²C-bus channel - supports dual-protocol communication without external mux |
| P10_0–P10_7 | AN_0–AN_7 | Eight dedicated analog inputs with KI0–KI3 key interrupt capability - ideal for front-panel button scanning |
| P15_0–P15_7 | IIO0_0–IIO0_7 / AN15_0–AN15_7 | Second analog bank with intelligent I/O overlay - enables synchronized PWM-triggered ADC sampling |
| P6_0–P6_7 | UART0–UART1 / CLK0–CLK1 / CTS0–CTS1 | Primary serial control cluster with clock and flow-control signals - simplifies RS-485 transceiver interfacing |
Key Features
| Feature | Design Value |
|---|---|
| Three-phase motor timer | Hardware-complemented PWM generation with 8-bit programmable dead-time insertion - eliminates software timing jitter in BLDC gate drive |
| DMAC II engine | Interrupt-triggered transfers with immediate data, calculation result, and chain transfer modes - offloads CPU during sensor data streaming |
| Floating-point unit | IEEE-754 single-precision compliant - accelerates PID loop calculations and coordinate transformations in real-time motion control |
| Multi-master I²C interface | Full-duplex arbitration and clock stretching support - enables concurrent communication with EEPROM, temperature sensors, and DACs |
| Intelligent I/O | 16-bit input capture (16 channels) and 16-bit output compare (24 channels) - synchronizes encoder position capture with PWM edge placement |
Applications
| Automotive Audio Amplifier Control | Industrial Three-Phase Motor Drive |
|---|---|
Use Scenario: Real-time digital signal processing and protection monitoring in Class-D automotive amplifiers. IC Role / Device Role / Timing Role: Main system controller managing DSP co-processor interface, CAN diagnostics, thermal shutdown, and fault reporting. Use Value: Integrated CAN 2.0B and 34-channel ADC enable direct connection to vehicle bus and current-sense shunts without external interface ICs. | Use Scenario: Closed-loop field-oriented control (FOC) of induction and PMSM motors in HVAC blowers and CNC spindles. IC Role / Device Role / Timing Role: Real-time motion controller executing PWM generation, encoder position decoding, and current-loop PI regulation. Use Value: Hardware three-phase timer with dead-time control and 24-channel intelligent I/O ensure sub-microsecond timing accuracy for gate driver synchronization. |
| Office Equipment Print Engine | Industrial PLC Analog I/O Module |
Use Scenario: Precision paper path timing, toner density calibration, and duplex registration in laser printers. IC Role / Device Role / Timing Role: Timing-critical motion sequencer coordinating stepper drivers, solenoids, and thermal fuser control. Use Value: 9-channel UART supports simultaneous communication with print engine ASIC, paper sensor array, and host USB bridge. | Use Scenario: Isolated analog input conditioning and digital output switching in modular PLC backplanes. IC Role / Device Role / Timing Role: Front-end signal processor handling 16-channel ADC oversampling, linearization, and CAN-based module addressing. Use Value: On-chip CRC-CCITT calculator and DMAC II enable error-resilient sensor data aggregation across distributed I/O nodes. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F64175NFD#U0 | Same silicon, rated for -20°C to +85°C (N version) instead of -40°C to +85°C (D version) | Suitable for commercial-grade office equipment but not automotive or extended-temperature industrial use | Select R5F64175DFB#U0 when operating ambient exceeds 65°C or requires AEC-Q100 alignment |
| R5F64176DFD#U0 | 512 KB flash + 8 KB data flash; same 40 KB RAM, identical peripherals and pinout | Enables larger firmware images with bootloader, OTA update stack, and dual-application partitioning | Choose R5F64175DFB#U0 when BOM cost sensitivity outweighs future firmware scalability needs |
Compared with R5F64175NFD#U0, the R5F64175DFB#U0 provides extended temperature qualification critical for under-dash automotive deployment; versus R5F64176DFD#U0, it trades 128 KB flash capacity for lower unit cost while retaining identical real-time peripheral latency and CAN timing behavior.
Availability
R5F64175DFB#U0 is available at Aetrix Electronics and suitable for automotive audio subsystems, industrial motor drives, office equipment print engines, and PLC analog I/O modules requiring stable component supply across extended temperature ranges.
Supply support for R5F64175DFB#U0 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and IoT markets.
The R32C/117 Group belongs to the high-end R32C/100 Series MCU line, designed specifically for deterministic real-time control in noise-immune automotive and industrial environments with integrated CAN, motor timers, and floating-point acceleration.
FAQ
What is the maximum operating frequency and supply voltage range for the R5F64175DFB#U0?
The R5F64175DFB#U0 operates at up to 64 MHz with a supply voltage range of 3.0 V to 5.5 V. Its minimum instruction execution time is 15.625 ns at full speed, and it supports low-power wait mode consuming only 8 µA at 3.3 V with 32.768 kHz sub-clock active. This voltage flexibility allows direct interfacing with both 3.3 V logic and legacy 5 V sensor buses.
Does the R5F64175DFB#U0 include on-chip debug and flash programming capability?
Yes, the R5F64175DFB#U0 integrates on-chip debug functionality and supports on-board flash programming via its dedicated debug interface. This eliminates dependency on external emulators during development and enables in-system firmware updates without removing the R5F64175DFB#U0 from the target board, streamlining production programming and field maintenance workflows.
How many CAN mailboxes does the R5F64175DFB#U0 support, and what CAN protocol version is implemented?
The R5F64175DFB#U0 supports 32 dedicated CAN mailboxes and implements CAN 2.0B protocol compliant with ISO 11898-1. Its hardware mailbox filtering and priority arbitration logic allow deterministic message handling in multi-node automotive networks, with guaranteed latency under 2 µs for highest-priority frames - essential for R5F64175DFB#U0 deployments in safety-critical audio diagnostic messaging.
What analog-to-digital converter (ADC) resources are available on the R5F64175DFB#U0?
The R5F64175DFB#U0 features a 10-bit ADC with 34 input channels, including dedicated sample-and-hold circuitry. Two independent analog banks (AN_0–AN_7 and AN15_0–AN15_7) support simultaneous sampling triggered by PWM events or timers - enabling precise current/voltage measurement synchronization critical for R5F64175DFB#U0-based motor control implementations.
Is the R5F64175DFB#U0 pin-compatible with other members of the R32C/117 Group?
Yes, all R32C/117 Group devices in the 144-pin LQFP package (PLQP0144KA-A) share identical pinouts, including R5F64175DFB#U0, R5F64176DFD#U0, and R5F64177DFD#U0. This allows drop-in replacement across flash size variants without PCB redesign, provided external circuitry aligns with the specific memory and peripheral configuration enabled in each part's ROM fuse settings.
R5F64175DFB#U0 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 100-LQFP
- Series:
- M16C/R32C/100/117
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- R32C/100
- Core Size:
- 16/32-Bit
- Speed:
- 50MHz
- Connectivity:
- CANbus, EBI/EMI, I2C, IEBus, UART/USART
- Peripherals:
- DMA, LVD, PWM, WDT
- Number of I/O:
- 84
- Program Memory Size:
- 384KB (384K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 8K x 8
- RAM Size:
- 40K x 8
- Voltage - Supply (Vcc/Vdd):
- 3V ~ 5.5V
- Data Converters:
- A/D 26x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
R5F64175DFB#U0 FAQ
1.How can I place an order for R5F64175DFB#U0 through Aetrix?
Please submit a Request for Quotation (RFQ) for R5F64175DFB#U0 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for R5F64175DFB#U0 reliable?
The price and inventory of R5F64175DFB#U0 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for R5F64175DFB#U0 is usually 5 days.
3.What payment methods are accepted for R5F64175DFB#U0?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for R5F64175DFB#U0 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for R5F64175DFB#U0?
R5F64175DFB#U0 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your R5F64175DFB#U0 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for R5F64175DFB#U0?
For technical support, including R5F64175DFB#U0 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your R5F64175DFB#U0 requirements.
6.How does Aetrix verify that R5F64175DFB#U0 is sourced from the original manufacturer or authorized distributors?
All R5F64175DFB#U0 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that R5F64175DFB#U0 meets industry standards.
7.What is the process for return or replacement of R5F64175DFB#U0?
All R5F64175DFB#U0 units undergo pre-shipment inspection (PSI). If there is an issue with R5F64175DFB#U0, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The R5F64175DFB#U0 part is unused and in its original packaging.
Return procedure for R5F64175DFB#U0:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
R5F64175DFB#U0 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
