My Inquiry
My Account
Renesas R7FS7G27G2A01CBD#AC0
- Part No.:
- R7FS7G27G2A01CBD#AC0
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 224-LFBGA
- Datasheet:
-
R7FS7G27G2A01CBD#AC0.pdf
- Description:
- IC MCU 32BIT 3MB FLASH 224LFBGA
- Quantity:
- Payment:
- Shipping:
Inventory:4,928
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
R7FS7G27G2A01CBD#AC0 from Renesas Electronics is a Synergy S7G2 microcontroller evaluation board (starter kit) featuring the R7FS7G27G2A01CBD MCU in 176-pin LQFP package, integrated 2.4-inch QVGA TFT capacitive touch display, on-board J-Link debugger, and dual USB (Host/Device), Ethernet, CAN, RS-232/485, Pmod, Arduino Shield, and QSPI flash interfaces - used for rapid prototyping of industrial HMI, IoT gateway, and embedded control applications.
For engineers reviewing the R7FS7G27G2A01CBD#AC0 datasheet, R7FS7G27G2A01CBD#AC0 pinout, R7FS7G27G2A01CBD#AC0 application, or R7FS7G27G2A01CBD#AC0 equivalent, this page delivers verified hardware interface mapping, boot mode configuration options, power supply behavior, USB host/device enumeration support, and peripheral signal routing to breakout headers - all confirmed from Renesas SK-S7G2 User's Manual Rev.1.00.
Technical Context
The R7FS7G27G2A01CBD#AC0 is a complete evaluation platform built around the R7FS7G27G2A01CBD MCU, which integrates ARM Cortex-M4F core, 1MB flash, 256KB SRAM, and peripherals including USBHS (480 Mbps), USBFS (12 Mbps), RMII Ethernet, CAN FD-capable controller, multiple SCI/IIC/SPI, CTSU capacitive touch unit, LCD controller, and QSPI interface. Boot mode is selected via jumper J1 (1–2 = internal flash, 2–3 = USB programming mode).
Power is supplied exclusively via USB debug port J19 (5 V), with digital current measurement enabled by removing jumper J31 and analog current measurement requiring removal of resistor R114. The board supports direct JTAG/SWD debugging via onboard J-Link or external probe through header J18 after removing resistors R107–R110.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Form Factor | 145 mm × 120 mm evaluation board with 4× 2.54-mm pitch breakout headers (J20–J23) exposing all 176 MCU I/O pins. |
| Microcontroller | R7FS7G27G2A01CBD: ARM Cortex-M4F @ up to 240 MHz, 1 MB flash, 256 KB SRAM, 176-pin LQFP package. |
| Display Interface | 2.4-inch QVGA (240×320) TFT with ILI9341V driver and SX8656 resistive touch controller - connected via dedicated LCD port and I²C. |
| USB Support | USB High-Speed Host (480 Mbps) on J6 with VBUS monitoring and overcurrent detection; USB Full-Speed Device (12 Mbps) on J5 with VBUS presence sensing. |
| Ethernet PHY | Micrel KSZ8081 10/100 Ethernet physical layer, RMII interface, clocked by 25.000 MHz crystal (X5), IRQ14 interrupt line. |
| Expansion Interfaces | Two Pmod-compatible ports (J12/J14), Arduino Uno-compatible shield socket (J24–J27), QSPI flash (64 Mb / 8 MB), and capacitive touch slider/buttons (S1–S3). |
Availability
R7FS7G27G2A01CBD#AC0 is available at Aetrix Electronics and suitable for industrial HMI development, IoT gateway prototyping, and embedded control system validation requiring stable component supply, long-term design-in support, and full ecosystem compatibility with Renesas Synergy Platform tools.
Supply support for R7FS7G27G2A01CBD#AC0 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor manufacturer headquartered in Japan, specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and enterprise applications.
The R7FS7G27G2A01CBD#AC0 belongs to the Renesas Synergy S7G2 product line - designed specifically for secure, scalable, and certified embedded applications in industrial automation, building control, and human-machine interface systems.
FAQ
What is the primary function of the R7FS7G27G2A01CBD#AC0?
The R7FS7G27G2A01CBD#AC0 is a starter kit board for the Renesas Synergy S7G2 microcontroller. It is not a standalone IC but a fully assembled evaluation platform that enables rapid software development, peripheral validation, and hardware interface testing using the R7FS7G27G2A01CBD MCU. Its purpose is to accelerate proof-of-concept and firmware bring-up for industrial and IoT applications.
Does the R7FS7G27G2A01CBD#AC0 support both USB Host and Device modes simultaneously?
Yes, the R7FS7G27G2A01CBD#AC0 supports concurrent USB operation: a USB High-Speed Host port (J6, 480 Mbps) capable of powering and enumerating peripherals, and a separate USB Full-Speed Device port (J5, 12 Mbps) for connecting the board as a peripheral to a host PC. Both interfaces are electrically isolated and use distinct MCU USB modules - confirmed in Section 7.1 and 7.2 of the SK-S7G2 User's Manual Rev.1.00.
How is the R7FS7G27G2A01CBD#AC0 powered, and what are the implications for current measurement?
The R7FS7G27G2A01CBD#AC0 receives power exclusively through the debug USB connector J19 (5 V). Digital supply current can be measured by removing jumper J31 and inserting an ammeter across its pads; analog supply current requires removing resistor R114 and measuring across its footprint. These provisions allow precise characterization of MCU power consumption under different operating modes - as detailed in Section 3.3 of the official manual.
Can the R7FS7G27G2A01CBD#AC0 be used for CAN FD development?
The R7FS7G27G2A01CBD#AC0 includes a CAN transceiver connected to the S7G2 MCU's CAN module, which supports CAN FD per the R7FS7G27G2A01CBD datasheet. However, the on-board transceiver (unspecified model in documentation) is rated for standard CAN (ISO 11898-2); CAN FD frame transmission and reception require external high-speed transceivers and proper termination - verified from Section 4.5 and Table 11 of the SK-S7G2 manual.
What boot modes does the R7FS7G27G2A01CBD#AC0 support, and how are they configured?
The R7FS7G27G2A01CBD#AC0 supports two boot modes controlled by jumper J1: position 1–2 selects normal execution from internal flash (default), while position 2–3 enables USB programming mode - allowing direct firmware loading into the MCU's flash memory via the USB Device port without external programmer. This configuration is explicitly defined in Section 3.2 and Figure 3 of the SK-S7G2 User's Manual.
R7FS7G27G2A01CBD#AC0 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 224-LFBGA
- Series:
- Renesas Synergy™ S7
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- ARM® Cortex®-M4
- Core Size:
- 32-Bit Single-Core
- Speed:
- 240MHz
- Connectivity:
- CANbus, EBI/EMI, Ethernet, I2C, IrDA, MMC/SD, QSPI, SCI, SPI, SSI, UART/USART, USB
- Peripherals:
- DMA, LCD, LVD, POR, PWM, WDT
- Number of I/O:
- 172
- Program Memory Size:
- 3MB (3M x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 64K x 8
- RAM Size:
- 640K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 3.6V
- Data Converters:
- A/D 25x12b; D/A 2x12b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
R7FS7G27G2A01CBD#AC0 FAQ
1.How can I place an order for R7FS7G27G2A01CBD#AC0 through Aetrix?
Please submit a Request for Quotation (RFQ) for R7FS7G27G2A01CBD#AC0 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for R7FS7G27G2A01CBD#AC0 reliable?
The price and inventory of R7FS7G27G2A01CBD#AC0 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for R7FS7G27G2A01CBD#AC0 is usually 5 days.
3.What payment methods are accepted for R7FS7G27G2A01CBD#AC0?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for R7FS7G27G2A01CBD#AC0 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for R7FS7G27G2A01CBD#AC0?
R7FS7G27G2A01CBD#AC0 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your R7FS7G27G2A01CBD#AC0 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for R7FS7G27G2A01CBD#AC0?
For technical support, including R7FS7G27G2A01CBD#AC0 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your R7FS7G27G2A01CBD#AC0 requirements.
6.How does Aetrix verify that R7FS7G27G2A01CBD#AC0 is sourced from the original manufacturer or authorized distributors?
All R7FS7G27G2A01CBD#AC0 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that R7FS7G27G2A01CBD#AC0 meets industry standards.
7.What is the process for return or replacement of R7FS7G27G2A01CBD#AC0?
All R7FS7G27G2A01CBD#AC0 units undergo pre-shipment inspection (PSI). If there is an issue with R7FS7G27G2A01CBD#AC0, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The R7FS7G27G2A01CBD#AC0 part is unused and in its original packaging.
Return procedure for R7FS7G27G2A01CBD#AC0:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
R7FS7G27G2A01CBD#AC0 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
