My Inquiry
My Account
Analog Devices Inc. RAPID-NI-V2110
- Part No.:
- RAPID-NI-V2110
- Manufacturer:
- Analog Devices Inc.
- Category:
- Modules
- Package:
- Module
- Datasheet:
-
RAPID-NI-V2110.pdf
- Description:
- CNTRLLR ETHERNET IEEE 802.3 MOD
- Quantity:
- Payment:
- Shipping:
Inventory:3,042
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RAPID-NI-V2110 from Innovasic is a fully integrated RapID Platform Network Interface module with REM Switch functionality, embedding communications controller, protocol stacks, Flash, RAM, dual Ethernet PHYs, and isolated chassis ground. It supports UART or 16-bit parallel host interface, operates from a single +3.3V supply (800mA), and delivers 1.0-second boot-to-operational readiness after reset or power-up.
For engineers reviewing the RAPID-NI-V2110 datasheet, RAPID-NI-V2110 pinout, RAPID-NI-V2110 application, or RAPID-NI-V2110 equivalent, key selection considerations include dual-port Ethernet connectivity with REM switch control, 3.3V-only MAN_RESET_N tolerance, on-board TC1270A supervisor IC, and support for bootloader (.load), JTAG (.elf), or flash programmer (.srec) firmware updates.
Technical Context
The RAPID-NI-V2110 implements a dual-interface host communication architecture: UART mode uses X1-C3 (TX) and X1-C4 (RX) with standard serial framing; parallel mode employs a 16-bit bidirectional data bus (UIC0_0–UIC0_15 / UIC1_0–UIC1_15) with dedicated control signals including WR_SEL_N, RD_SEL_N, FIFONOTEMPTY_N, and INT4.
It integrates two isolated Ethernet ports with Link/Activity LEDs inside the RJ45 connectors, chassis ground isolation via X1-C10, and a dedicated REM switch control path managed by the onboard fido®-based unified interface stack. Power sequencing is simplified by requiring only +3.3V ±10% with no auxiliary rails.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Host Interface | UART (2-pin) or 16-bit parallel (24+ signal pins); enables flexible integration with microcontrollers or FPGA-based host processors. |
| Power Supply | +3.3V ±10%, 800mA max; single-rail operation simplifies power design and eliminates need for voltage translators or LDO sequencing. |
| Reset Architecture | MAN_RESET_N (active-low, 3.3V-only, 10µs min pulse) feeds TC1270A supervisor; RESET_OUT_N provides system-level reset status indication. |
| Physical Dimensions | 60.5 mm × 56.3 mm × 18.2 mm; compact form factor designed for insertion into field-deployable industrial hardware via 64-pin 0.1" socket. |
| Ethernet Interface | Dual 10/100BASE-TX ports with integrated PHYs, RJ45 connectors, and per-port Link/Activity LEDs embedded in connector housing. |
| Firmware Update Methods | Three production-ready paths: Ethernet bootloader (.load), JTAG (.elf), or offline flash programmer (.srec); supports field updates and blank-flash provisioning. |
Availability
RAPID-NI-V2110 is available at Aetrix Electronics and suitable for industrial automation gateways, distributed control systems, and remote equipment monitoring applications requiring stable component supply, long-term lifecycle support, and field-upgradable firmware.
Supply support for RAPID-NI-V2110 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Innovasic, Inc. is a U.S.-based semiconductor company specializing in deterministic real-time networking solutions for industrial and embedded systems, headquartered in Albuquerque, New Mexico.
The RAPID-NI-V2110 belongs to the RapID Platform family, engineered to accelerate deployment of interoperable, field-upgradable network interface modules for industrial Ethernet applications with integrated REM switching and protocol stack offload.
FAQ
What host processor interfaces does the RAPID-NI-V2110 support?
The RAPID-NI-V2110 supports two mutually exclusive host interfaces: a UART interface using X1-C3 (TX) and X1-C4 (RX), or a 16-bit parallel interface using UIC0/UIC1 signal groups across X1-A through X1-D rows. The parallel interface requires external glue logic for HPI_OE_N, HPI_CS_N, HPI_WE_N, and FIFONOTEMPTY_N control, as defined in the "HPI Personality Module" schematic.
Does the RAPID-NI-V2110 require external reset circuitry?
No - the RAPID-NI-V2110 includes an on-board TC1270A voltage supervisor IC. It can initialize autonomously upon valid +3.3V power application. However, an external active-low reset pulse applied to X1-B8 (MAN_RESET_N) is supported for synchronized system resets, provided it meets the 10µs minimum pulse width requirement.
What is the role of the REM Switch in the RAPID-NI-V2110?
The REM Switch in the RAPID-NI-V2110 enables remote enable/disable control of Ethernet port functionality under software command via the unified interface stack. It is implemented as part of the fido®-based firmware layer and allows dynamic reconfiguration of network topology without physical intervention or hardware modification.
How is firmware updated on the RAPID-NI-V2110?
Firmware on the RAPID-NI-V2110 can be updated via three independent methods: (1) Ethernet bootloader using .load files, (2) JTAG interface using .elf files with RapID-PGMR VMCGR programmer, or (3) offline flash programming using Motorola S-record (.srec) files. All methods support full component updates including Boot Loader, Unified Interface, Network stack, and Configuration Data.
What are the grounding provisions on the RAPID-NI-V2110?
The RAPID-NI-V2110 provides separate signal ground (X1-C1, X1-C9) and chassis ground (X1-C10) connections. Chassis ground is routed exclusively to the Ethernet line-side isolation boundary and must be connected to shielded enclosure ground to maintain EMC compliance and noise immunity for the dual Ethernet ports.
RAPID-NI-V2110 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- RapID™
- Package/Case:
- Module
- Packaging:
- Box
- Product Status:
- Active
- Protocol:
- Ethernet
- Function:
- Controller
- Interface:
- UART
- Standards:
- IEEE 802.3
- Voltage - Supply:
- 3.3V
- Current - Supply:
- -
- Operating Temperature:
- -40°C ~ 85°C
- Supplier Device Package:
- Module
- Grade:
- -
- Qualification:
- -
RAPID-NI-V2110 FAQ
1.How can I place an order for RAPID-NI-V2110 through Aetrix?
Please submit a Request for Quotation (RFQ) for RAPID-NI-V2110 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RAPID-NI-V2110 reliable?
The price and inventory of RAPID-NI-V2110 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RAPID-NI-V2110 is usually 5 days.
3.What payment methods are accepted for RAPID-NI-V2110?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RAPID-NI-V2110 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RAPID-NI-V2110?
RAPID-NI-V2110 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RAPID-NI-V2110 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RAPID-NI-V2110?
For technical support, including RAPID-NI-V2110 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RAPID-NI-V2110 requirements.
6.How does Aetrix verify that RAPID-NI-V2110 is sourced from the original manufacturer or authorized distributors?
All RAPID-NI-V2110 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RAPID-NI-V2110 meets industry standards.
7.What is the process for return or replacement of RAPID-NI-V2110?
All RAPID-NI-V2110 units undergo pre-shipment inspection (PSI). If there is an issue with RAPID-NI-V2110, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RAPID-NI-V2110 part is unused and in its original packaging.
Return procedure for RAPID-NI-V2110:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RAPID-NI-V2110 Tags
-
UMFT234XF
FTDI, Future Technology Devices International Ltd
-
ISL99227HRZ-T7A
Renesas Electronics Corporation
-
284
Adafruit Industries LLC
-
DEV-09716
SparkFun Electronics
-
DEV-09873
SparkFun Electronics
-
WIZ550IO
WIZnet
-
WIZ850IO
WIZnet
-
WIZ750SR-TTL
WIZnet
-
WIZ750SR-110
WIZnet
-
WIZ812MJ
WIZnet
-
WIZ810MJ
WIZnet
-
50020R-10
Renesas Electronics Corporation
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
