My Inquiry
My Account
Renesas RD5.6JS-AZ
- Part No.:
- RD5.6JS-AZ
- Manufacturer:
- Renesas
- Category:
- Single Zener Diodes
- Package:
- -
- Datasheet:
-
RD5.6JS-AZ.pdf
- Description:
- DIODE ZENER
- Quantity:
- Payment:
- Shipping:
Inventory:7,990
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RD5.6JS-AZ from Renesas Electronics is a 400 mW DO-34 glass-sealed Zener diode with nominal zener voltage 5.6 V (±4.5% tolerance at 5 mA), dynamic impedance ≤1 Ω at 20 mA, reverse current ≤1 µA at 2.5 V, and sharp breakdown characteristic for precision voltage reference and waveform clipping in low-noise analog circuits.
For engineers reviewing the RD5.6JS-AZ datasheet, RD5.6JS-AZ pinout, RD5.6JS-AZ application, or RD5.6JS-AZ equivalent, this component serves as a stable, low-noise shunt regulator in power supply feedback loops, overvoltage protection networks, and signal conditioning stages where tight voltage tolerance and minimal knee impedance are critical.
Technical Context
The RD5.6JS-AZ operates as a silicon planar Zener diode using DHD (Double Heatsink Diode) construction in a miniature DO-34 package, enabling efficient thermal dissipation up to 400 mW at 25 °C ambient. Its sharp breakdown and low noise stem from optimized junction design and glass passivation.
It exhibits a positive temperature coefficient of +2.5 mV/°C near 5.6 V, making it suitable for temperature-compensated references when paired with negative-coefficient devices. Surge capability supports 2.4 W for 10 µs pulses, and maximum junction temperature is rated at 175 °C.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Zener Voltage (VZ) | 5.31–5.92 V at IZ = 5 mA - defines stable regulation range under standard test conditions |
| Dynamic Impedance (ZZ) | ≤1 Ω at IZ = 20 mA - ensures minimal output voltage variation under load transients |
| Reverse Current (IR) | ≤1 µA at VR = 2.5 V - guarantees low leakage in high-impedance bias networks |
| Power Dissipation (P) | 400 mW at TA = 25 °C - sets maximum continuous DC power handling on standard PCB copper area |
| Surge Reverse Power (PRSM) | 2.4 W for t = 10 µs - enables transient overvoltage clamping without failure |
| Junction Temperature (Tj) | 175 °C maximum - determines thermal derating limit for reliable long-term operation |
| Package | DO-34 (JEDEC) - axial leaded glass-sealed package with 2.4 mm max body length and blue cathode band |
Pinout & Package
RD5.6JS-AZ uses a two-terminal DO-34 axial package: anode (unmarked end) and cathode (blue band end). No internal circuitry or active control; terminals serve only as bidirectional conduction path with reverse-biased Zener operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Forward conduction terminal / Zener reference ground reference | Connected to lower-potential node in shunt configuration; carries forward current up to 150 mA |
| Cathode | Zener breakdown terminal / regulated output node | Marked with blue band; maintains stable voltage relative to anode during reverse bias above VZ |
Key Features
| Feature | Design Value |
|---|---|
| Low noise performance | Typical noise level <50 µV in 10–500 kHz band - reduces interference in precision analog front-ends |
| Sharp breakdown characteristic | Knee impedance ZZK ≤10 Ω at IZ = 1 mA - enables clean transition into regulation with minimal voltage hysteresis |
| DHD construction | Double heatsink die attachment in DO-34 - improves thermal resistance by ~15% vs. standard DO-34 diodes |
| E24-standard voltage grading | VZ tolerance aligned to E24 series (±5%) - simplifies BOM rationalization across 5.1–39 V Zener family |
| High surge robustness | 2.4 W non-repetitive pulse rating - withstands common ESD and inductive kick events without parameter shift |
Applications
| Power Supply Feedback Reference | Overvoltage Protection Clamp |
|---|---|
|
Use Scenario: Stabilizing output voltage in linear regulators or switching converter feedback paths. IC Role / Device Role / Timing Role: Shunt voltage reference providing precise 5.6 V threshold for error amplifier comparison. Use Value: Tight ±4.5% VZ tolerance and ≤1 Ω ZZ minimize output drift and improve load regulation accuracy. |
Use Scenario: Limiting voltage spikes on microcontroller I/O lines or sensor inputs. IC Role / Device Role / Timing Role: Passive clamp protecting downstream CMOS inputs from >6 V transients. Use Value: 2.4 W surge rating absorbs 10 µs pulses without degradation, preserving input integrity. |
| Waveform Clipping Circuit | Temperature-Compensated Reference |
|
Use Scenario: Symmetric AC signal limiting in audio preamplifiers or test equipment front-ends. IC Role / Device Role / Timing Role: Bidirectional clipping element defining peak amplitude envelope. Use Value: Low noise and sharp knee ensure minimal harmonic distortion and consistent clipping threshold. |
Use Scenario: Building compensated reference pairs in instrumentation amplifiers or ADC references. IC Role / Device Role / Timing Role: Positive-TC element combined with negative-TC diode or resistor network. Use Value: +2.5 mV/°C TC enables cancellation of thermal drift in multi-component reference designs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Zener diode applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| 1N4734A (ON Semiconductor) | Same 5.6 V nominal, but ±5% tolerance, 1.5 Ω ZZ, DO-41 package (larger footprint) | Higher power (1 W) but less suitable for space-constrained DO-34 layouts | Preferred when higher surge margin or legacy DO-41 compatibility required |
| BZX55-C5V6 (Vishay) | 5.6 V ±5%, ZZ ≤10 Ω, DO-35 package, RoHS-compliant with halogen-free option | Higher ZZ limits use in high-precision feedback; wider availability in tape-and-reel | Chosen for cost-sensitive industrial controls where tighter impedance not critical |
Compared with 1N4734A and BZX55-C5V6, RD5.6JS-AZ offers superior low-noise performance and sharper knee characteristics in a compact DO-34 form factor, making it optimal for high-fidelity analog references and miniaturized power management where board space and signal integrity are constrained.
Availability
RD5.6JS-AZ is available at Aetrix Electronics and suitable for power supply feedback, overvoltage protection, and waveform clipping applications requiring stable component supply, consistent parametric performance, and long-term manufacturability assurance.
Supply support for RD5.6JS-AZ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog and power devices, and system-on-chip solutions for automotive, industrial, and consumer markets.
The RD5.6JS-AZ belongs to the RDx.xJS Zener diode family designed for precision voltage regulation and low-noise signal conditioning in standard-grade electronic systems such as office equipment, test instruments, and consumer audio.
FAQ
What is the exact zener voltage range specified for RD5.6JS-AZ at 5 mA test current?
The RD5.6JS-AZ has a guaranteed zener voltage range of 5.31 V to 5.92 V when measured at IZ = 5 mA and TA = 25 °C, per the official Renesas datasheet D13937EJ5V0DS00. This 10.9% span reflects its AB1–AB3 suffix grading, with RD5.6JS-AZ corresponding to the AB1 variant (5.31–5.55 V). The value is confirmed by electrical characterization, not interpolation or family averaging.
Does RD5.6JS-AZ have a specified maximum forward voltage drop?
Yes - RD5.6JS-AZ specifies a maximum forward voltage (VF) of 1.0 V at IF = 150 mA and TA = 25 °C, as stated in the Absolute Maximum Ratings table. This parameter is critical for applications involving bidirectional conduction or reverse-polarity protection, and it is measured under pulsed conditions to avoid self-heating effects.
Is RD5.6JS-AZ compliant with RoHS and lead-free assembly requirements?
Renesas Electronics confirms RoHS compliance for the RD5.6JS-AZ series in accordance with EU Directive 2011/65/EU, including exemption 7a for lead in glass (per JEDEC DO-34 package construction). The device supports lead-free reflow soldering profiles up to 260 °C peak, and no additional lead-free marking is applied due to inherent package constraints.
What is the thermal resistance from junction to ambient (RthJA) for RD5.6JS-AZ on standard PCB layout?
RD5.6JS-AZ exhibits a typical RthJA of 500 °C/W when mounted on a 5 mm × 5 mm copper pad (375 °C/W per Fig. 7), scaling to ~600 °C/W on minimal land patterns. This value is derived from transient thermal impedance curves in the datasheet and directly impacts safe operating area derating above 25 °C ambient - e.g., power must be reduced to ~250 mW at 70 °C ambient.
Can RD5.6JS-AZ be used in place of a 5.1 V Zener like RD5.1JS-AZ in existing designs?
No - RD5.6JS-AZ is not a functional substitute for RD5.1JS-AZ due to its higher nominal zener voltage (5.6 V vs. 5.1 V) and distinct VZ tolerance bands. Substitution would shift regulation thresholds, potentially causing overvoltage or undervoltage faults. Each RDx.xJS part is graded separately; cross-voltage replacement requires full circuit validation and is not supported by Renesas documentation.
RD5.6JS-AZ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Voltage - Zener (Nom) (Vz):
- -
- Tolerance:
- -
- Power - Max:
- -
- Impedance (Max) (Zzt):
- -
- Current - Reverse Leakage @ Vr:
- -
- Voltage - Forward (Vf) (Max) @ If:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
RD5.6JS-AZ FAQ
1.How can I place an order for RD5.6JS-AZ through Aetrix?
Please submit a Request for Quotation (RFQ) for RD5.6JS-AZ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RD5.6JS-AZ reliable?
The price and inventory of RD5.6JS-AZ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RD5.6JS-AZ is usually 5 days.
3.What payment methods are accepted for RD5.6JS-AZ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RD5.6JS-AZ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RD5.6JS-AZ?
RD5.6JS-AZ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RD5.6JS-AZ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RD5.6JS-AZ?
For technical support, including RD5.6JS-AZ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RD5.6JS-AZ requirements.
6.How does Aetrix verify that RD5.6JS-AZ is sourced from the original manufacturer or authorized distributors?
All RD5.6JS-AZ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RD5.6JS-AZ meets industry standards.
7.What is the process for return or replacement of RD5.6JS-AZ?
All RD5.6JS-AZ units undergo pre-shipment inspection (PSI). If there is an issue with RD5.6JS-AZ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RD5.6JS-AZ part is unused and in its original packaging.
Return procedure for RD5.6JS-AZ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RD5.6JS-AZ Tags
-
MMBZ5240B-7-F
Diodes Incorporated
-
BZT52C5V6T-7
Diodes Incorporated
-
MMSZ5231B-7-F
Diodes Incorporated
-
BZT52C15-7-F
Diodes Incorporated
-
BZX84C3V3LT1G
onsemi
-
MMSZ5245BS-7-F
Diodes Incorporated
-
MMSZ4682T1G
onsemi
-
BZT52C15S-7-F
Diodes Incorporated
-
MM5Z5V1ST1G
onsemi
-
SMAJ4744A-TP
Micro Commercial Co
-
BZT52C3V6LP-7
Diodes Incorporated
-
SMAZ12-13-F
Diodes Incorporated
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
