NXP Semiconductors RDK01DB1563

Overview

RDK01DB1563 from NXP Semiconductors is a TEA2016 digital resonant power controller development kit designed for lab-based engineering evaluation and parameter tuning of AC-DC power supplies. It includes the TEA2016DB1514v2 USB-I2C interface board, 3-pin and 6-pin connection cables, and supports real-time I2C communication with TEA2016AATdev and TEA2016AAT ICs during development and programming.

For engineers reviewing the RDK01DB1563 datasheet, RDK01DB1563 pinout, RDK01DB1563 application, or RDK01DB1563 equivalent, this kit enables rapid configuration, firmware-free parameter adjustment, and debug-level interaction with TEA2016-based resonant power supply designs on Windows PCs using Ringo GUI software and FT232H-based USB-I2C bridging.

Technical Context

The RDK01DB1563 implements a hardware-software co-development environment centered on the TEA2016 digital controller IC. It uses an FT232H-based USB-to-I2C bridge (TEA2016DB1514v2) to establish bidirectional communication between Windows-hosted Ringo software and target TEA2016 devices - either on live power supplies (via 3-pin connection) or standalone ICs (via 6-pin programming board).

This kit supports both operational tuning (e.g., modifying protection thresholds or startup timing while powered at low AC voltage) and pre-deployment programming (e.g., writing configuration registers to TEA2016AAT ICs). It requires no driver installation beyond the standard FTDI FT232H driver and operates without system-level installation - Ringo.exe runs portably from its extracted folder.

Key Specifications

Availability

RDK01DB1563 is available at Aetrix Electronics and suitable for AC-DC resonant power supply development, TEA2016 parameter optimization, and production-ready firmware-free configuration requiring stable component supply and traceable sourcing.

Supply support for RDK01DB1563 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands, specializing in secure connectivity solutions for automotive, industrial, IoT, and power management applications.

The RDK01DB1563 belongs to NXP's GreenChip™ TEA2016 product line - a family of digitally programmable resonant LLC controllers targeting high-efficiency, compact AC-DC adapters and open-frame power supplies up to 300 W.

FAQ

Does RDK01DB1563 require installation of drivers before use?

Yes - the RDK01DB1563 relies on the FTDI FT232H USB-to-serial driver for I2C communication. The driver typically installs automatically on first USB connection under Windows, but manual installation from the included Ringo package is required if auto-install fails. Without this driver, Ringo.exe will not communicate with TEA2016 devices, regardless of cable or switch configuration.

Can RDK01DB1563 tune TEA2016AATdev ICs while the power supply is operating?

Yes - RDK01DB1563 supports live tuning of TEA2016AATdev ICs via the 3-pin connection when the power supply is energized at ≥50 VAC (providing sufficient HV bias to the IC) or when an external 20 V supply is applied to SUPIC. This allows real-time adjustment of parameters such as overvoltage protection, soft-start time, and burst-mode thresholds without interrupting operation.

What is the difference between the 3-pin and 6-pin connection modes on RDK01DB1563?

The 3-pin mode connects to TEA2016AATdev-equipped demo boards (e.g., TEA2016DB1519v2) for live parameter tuning during partial power-up. The 6-pin mode connects to TEA2016DB1561 programming boards for full register read/write of TEA2016AAT ICs prior to deployment. The interface board's physical switch selects between these two I2C channels - they are electrically isolated and not simultaneously active.

Is Ringo software compatible with operating systems other than Windows?

No - Ringo software is compiled exclusively for Microsoft Windows (32-bit and 64-bit). It does not run natively on Linux or macOS. While Windows emulation (e.g., VirtualBox or Parallels) may enable execution, NXP provides no support for non-Windows environments, and USB device passthrough reliability for the FT232H interface cannot be guaranteed in emulated contexts.

Where can I find the circuit diagram for the RDK01DB1563 interface board?

The schematic for the TEA2016DB1514v2 interface board included in RDK01DB1563 is published in UM11235 - the official user manual for that board. It is bundled in the Ringo software package under the "Help" tab and also resides in the /document folder on the supplied USB stick. No separate schematic is provided for the full RDK01DB1563 kit assembly.