My Inquiry
My Account
Renesas RJE0601JPE-00#J3
- Part No.:
- RJE0601JPE-00#J3
- Manufacturer:
- Renesas
- Package:
- SC-83
- Datasheet:
-
RJE0601JPE-00#J3.pdf
- Description:
- ABU / MOSFET
- Quantity:
- Payment:
- Shipping:
Inventory:1,884
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJE0601JPE-00#J3 from Renesas Electronics is a silicon P-channel MOSFET power switch with integrated overtemperature shutdown, current limiting, and latch-type thermal protection. It delivers 22 mΩ typical RDS(on) at VGS = –10 V, –60 V VDSS, and –40 A continuous drain current, designed for high-reliability DC load switching in industrial power distribution systems.
For engineers reviewing the RJE0601JPE-00#J3 datasheet, RJE0601JPE-00#J3 pinout, RJE0601JPE-00#J3 application, or RJE0601JPE-00#J3 equivalent, key selection criteria include its built-in thermal shutdown threshold (175°C), latch recovery requirement (0 V gate reset), and short-circuit endurance - critical for unattended 24/7 power control circuits.
Technical Context
This device integrates four protection functions on-die: temperature-sensing circuitry tied to junction temperature, latch-type gate-shutdown logic, current-limiting circuitry, and gate resistor matching for controlled turn-on. Its operation requires full gate voltage removal (0 V) to reset after thermal trip - not just reduced bias.
The RJE0601JPE-00#J3 uses a single-chip LDPAK(S)-(1) package with flanged drain for low thermal resistance (θch–c = 2.5°C/W), enabling high-power switching without external heatsinking up to 50 W channel dissipation at Tc = 25°C. Body diode reverse recovery time is specified at 100 ns under 50 A/μs di/dt.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | –60 V: Maximum blocking voltage before avalanche conduction; suitable for 48 V DC bus applications with margin. |
| RDS(on) | 22 mΩ typ @ VGS = –10 V: Enables ≤0.88 W conduction loss at –20 A, reducing thermal stress in compact layouts. |
| ID continuous | –40 A: Rated drain current at Tc = 25°C; derates to zero at Tc = 150°C per published curve. |
| Tsd | 175°C: Junction temperature threshold triggering latch-type shutdown; prevents thermal runaway during overload. |
| tos1 | 2.3 ms: Overload shutdown response time at VGS = –5 V, VDD = –16 V; enables fast fault isolation. |
| |yfs| | 27 S max @ ID = –20 A: High transconductance supports stable gate drive with moderate impedance sources. |
| Coss | 860 pF @ VDS = –10 V: Output capacitance impacts switching loss and EMI in hard-switched topologies. |
Pinout & Package
Package: LDPAK(S)-(1) (RENESAS code PRSS0004AE-B), surface-mount, flanged drain for thermal and mechanical robustness. Dimensions: 10.2 × 8.6 × 1.37 mm (L × W × H), mass 1.30 g.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Gate) | Control input | Accepts –3.5 V to –12 V logic-compatible gate drive; shutdown state draws –0.8 mA at –8 V. |
| 2 (Drain) | High-side power output | Flanged terminal connected internally to drain; primary heat path to PCB copper or heatsink. |
| 3 (Source) | Power return reference | Common node for gate drive return and current sensing; tied to system ground in high-side configuration. |
Key Features
| Feature | Design Value |
|---|---|
| Integrated thermal shutdown | Latch-type operation triggered at 175°C junction temperature; requires full gate discharge (0 V) to reset. |
| On-chip current limiting | Clamps drain current to –40 A minimum / –60 A maximum under VGS = –12 V, preventing destructive overcurrent. |
| Short-circuit ruggedness | Rated for repeated short-circuit events without degradation; validated via avalanche energy (964 mJ) and pulse testing. |
| Low RDS(on) with flanged package | 22 mΩ typical RDS(on) combined with θch–c = 2.5°C/W enables high-current switching without external heatsink at moderate duty cycles. |
Applications
| Industrial Motor Control | Automotive Power Distribution |
|---|---|
Use Scenario: Controlling 24–48 V DC brush motors in programmable logic controller (PLC) output modules. IC Role / Device Role / Timing Role: High-side power switch with integrated fault protection, replacing discrete MOSFET + external thermal sensor + comparator. Use Value: Eliminates 3–5 external components while providing deterministic 2.3 ms overload shutdown - improving board-level reliability and reducing BOM count. | Use Scenario: Load switching for engine control unit (ECU) auxiliary circuits requiring ASIL-B–compatible fault handling. IC Role / Device Role / Timing Role: Protected high-side driver managing solenoid, fuel pump, or HVAC blower loads. Use Value: Built-in 175°C thermal latch and current limit meet functional safety requirements for transient overloads without software intervention. |
| Telecom Power Management | Renewable Energy Systems |
Use Scenario: Hot-swap insertion control and load disconnect in 48 V telecom rectifier shelves. IC Role / Device Role / Timing Role: Primary power switch with fast fault response (2.3 ms shutdown) and low conduction loss (22 mΩ). Use Value: Enables <100 μs fault-to-isolation latency when paired with fast gate drivers, meeting GR-1089-CORE surge immunity requirements. | Use Scenario: Battery disconnect and charge path control in off-grid solar inverters with 48 V nominal battery banks. IC Role / Device Role / Timing Role: Bidirectional current-handling switch (via body diode) with overtemperature lockout during sustained overcharge conditions. Use Value: Integrated 100 ns body-diode trr and 964 mJ avalanche rating support safe interruption of inductive battery currents during fault events. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel protected power switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| IXTP30P06T | No integrated thermal shutdown or current limiting; discrete P-MOSFET only (RDS(on) = 30 mΩ @ –10 V). | Requires external protection IC and gate driver; higher component count and layout complexity. | Select when cost sensitivity outweighs protection integration needs and board space allows discrete design. |
| STP12PF06 | Includes thermal shutdown but non-latching (auto-recovery); RDS(on) = 45 mΩ @ –10 V; no current limit circuit. | Suitable for intermittent overload scenarios where automatic restart is acceptable; lower short-circuit ruggedness. | Prefer for consumer-grade applications where latch behavior is undesirable and peak current is <25 A. |
Compared with IXTP30P06T and STP12PF06, the RJE0601JPE-00#J3 uniquely combines latch-type thermal shutdown, on-die current limiting, and 22 mΩ RDS(on) - delivering superior fault containment for mission-critical industrial and automotive power nodes without external circuitry.
Availability
RJE0601JPE-00#J3 is available at Aetrix Electronics and suitable for industrial motor control, automotive power distribution, and telecom hot-swap applications requiring stable component supply, long-term lifecycle support, and guaranteed traceable sourcing.
Supply support for RJE0601JPE-00#J3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, and power devices for industrial, automotive, and infrastructure markets.
The RJE0601JPE-00#J3 belongs to Renesas' Silicon P-Channel MOS FET Series targeting high-reliability DC power switching - engineered specifically for applications demanding integrated protection, minimal external components, and robust short-circuit survival.
FAQ
What is the gate voltage range required to fully turn on the RJE0601JPE-00#J3?
The RJE0601JPE-00#J3 achieves its specified 22 mΩ RDS(on) at VGS = –10 V. Full enhancement occurs between –3.5 V and –12 V, with VGS(off) ranging from –2.2 V to –3.4 V. Gate drive must remain within –16 V to +2.5 V absolute limits to avoid damage. The RJE0601JPE-00#J3 does not require negative gate voltage beyond –12 V for normal operation.
How does the latch-type thermal shutdown of the RJE0601JPE-00#J3 reset after activation?
The RJE0601JPE-00#J3 requires complete gate voltage removal (0 V applied to Gate pin) to reset its latch-type thermal shutdown circuit. Reducing gate voltage to –1.2 V or –3.5 V is insufficient - only 0 V gate potential releases the latch. This ensures fault conditions are fully cleared before re-enabling the switch. The RJE0601JPE-00#J3 will not auto-recover during continued overtemperature exposure.
Can the RJE0601JPE-00#J3 be used in high-side or low-side switching configurations?
The RJE0601JPE-00#J3 is optimized for high-side switching due to its P-channel architecture and source-referenced gate drive. In low-side configuration, the source would be grounded and gate driven negatively relative to ground - requiring a floating gate driver and offering no advantage over N-channel alternatives. The RJE0601JPE-00#J3 datasheet specifies all parameters assuming high-side use with source connected to load.
What is the maximum allowable case temperature for continuous operation of the RJE0601JPE-00#J3?
The RJE0601JPE-00#J3 has a maximum channel temperature (Tch) of 150°C and a storage temperature range of –55°C to +150°C. Continuous operation is limited by thermal derating: at Tc = 100°C, channel dissipation drops to ~20 W; at Tc = 125°C, it falls below 10 W. The RJE0601JPE-00#J3 must be mounted on ≥100 mm² 2-oz copper with thermal vias to sustain rated current at elevated ambient temperatures.
Does the RJE0601JPE-00#J3 include body diode specifications, and are they usable in bidirectional current paths?
Yes, the RJE0601JPE-00#J3 specifies body-drain diode forward voltage (VDF = –0.95 V @ –40 A) and reverse recovery time (trr = 100 ns). These parameters confirm usability in bidirectional paths such as battery disconnect or regenerative braking snubbing - provided di/dt remains ≤50 A/μs and peak reverse current stays within –40 A limits. The RJE0601JPE-00#J3 body diode is integral to its safe operation in such roles.
RJE0601JPE-00#J3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- SC-83
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Type:
- General Purpose
- Number of Outputs:
- 1
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- -
- Output Type:
- P-Channel
- Interface:
- On/Off
- Voltage - Load:
- -3.5V ~ -12V
- Voltage - Supply (Vcc/Vdd):
- Not Required
- Current - Output (Max):
- 40A
- Rds On (Typ):
- 26mOhm
- Input Type:
- Non-Inverting
- Features:
- Latch Function
- Fault Protection:
- Current Limiting (Fixed), Over Temperature
- Operating Temperature:
- 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- LDPAK
RJE0601JPE-00#J3 FAQ
1.How can I place an order for RJE0601JPE-00#J3 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJE0601JPE-00#J3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJE0601JPE-00#J3 reliable?
The price and inventory of RJE0601JPE-00#J3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJE0601JPE-00#J3 is usually 5 days.
3.What payment methods are accepted for RJE0601JPE-00#J3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJE0601JPE-00#J3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJE0601JPE-00#J3?
RJE0601JPE-00#J3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJE0601JPE-00#J3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJE0601JPE-00#J3?
For technical support, including RJE0601JPE-00#J3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJE0601JPE-00#J3 requirements.
6.How does Aetrix verify that RJE0601JPE-00#J3 is sourced from the original manufacturer or authorized distributors?
All RJE0601JPE-00#J3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJE0601JPE-00#J3 meets industry standards.
7.What is the process for return or replacement of RJE0601JPE-00#J3?
All RJE0601JPE-00#J3 units undergo pre-shipment inspection (PSI). If there is an issue with RJE0601JPE-00#J3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJE0601JPE-00#J3 part is unused and in its original packaging.
Return procedure for RJE0601JPE-00#J3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJE0601JPE-00#J3 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
