My Inquiry
My Account
Renesas RJE0607JSP-00#J0
- Part No.:
- RJE0607JSP-00#J0
- Manufacturer:
- Renesas
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
RJE0607JSP-00#J0.pdf
- Description:
- ABU / MOSFET
- Quantity:
- Payment:
- Shipping:
Inventory:4,839
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJE0607JSP-00#J0 from Renesas Electronics is a silicon P-channel MOSFET power switch with integrated overtemperature shutdown, current limiting, and latch-type thermal protection. It delivers RDS(on) = 140 mΩ (typ) at VGS = –10 V, supports –60 V drain-source voltage, and operates up to 150°C channel temperature - designed for high-reliability DC load switching in industrial control and power management systems.
For engineers reviewing the RJE0607JSP-00#J0 datasheet, RJE0607JSP-00#J0 pinout, RJE0607JSP-00#J0 application, or RJE0607JSP-00#J0 equivalent, this device offers verified thermal shutdown behavior, gate-controlled latch recovery, and short-circuit endurance validated under pulsed overload conditions per R07DS0123EJ0200 Rev.2.00.
Technical Context
The RJE0607JSP-00#J0 integrates dual MOSFETs in a single SOP-8 package, each with independent gate resistors, temperature-sensing circuits, latch-type shutdown logic, and current-limiting circuitry. Its thermal shutdown activates at Tch = 175°C (typ), requiring full gate voltage removal (0 V recovery) to reset.
It features body-drain diode forward voltage VDF = 0.83 V (typ) at IF = –1.5 A and reverse recovery time trr = 85 ns (typ), supporting fast-switching DC loads. Gate operation voltage range is –3.5 V to –12 V, with input current IIH(sd) = –0.8 mA (typ) during shutdown state.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | –60 V - Withstands continuous negative rail-to-load voltages up to 60 V without breakdown. |
| RDS(on) | 140 mΩ (typ) at VGS = –10 V - Enables low conduction loss for ≤1.5 A DC load current in compact PCB layouts. |
| Tsd | 175°C (typ) - Junction temperature threshold triggering latch-type gate shutdown to prevent thermal runaway. |
| ID(limit) | –1.5 A - Hard current limit prevents destructive overcurrent during short-circuit events. |
| tos1 | 18.6 ms (typ) - Overload shutdown response time under VGS = –5 V, VDD = –16 V conditions. |
| VGS(off) | –2.2 to –3.4 V - Ensures reliable turn-off margin against noise in industrial 3.3 V/5 V control environments. |
| Coss | 194 pF (typ) at VDS = –10 V - Supports predictable switching energy and EMI profile in <1 MHz switching applications. |
Pinout & Package
Package: SOP-8 (FP-8DAV), Renesas code PRSP0008DD-D - surface-mount, 3.95 × 4.9 mm footprint with 1.27 mm pitch, Ni/Pd/Au-plated terminals.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 3 | Source | Common source connection for both internal MOSFETs; tied to system ground or low-side return path. |
| 2, 4 | Gate | Independent gate inputs enabling dual-channel control; requires external pull-up for default-off operation. |
| 5, 6, 7, 8 | Drain | Parallel-connected drain terminals delivering combined current path to load; thermally coupled to case for sensing. |
Key Features
| Feature | Design Value |
|---|---|
| Integrated overtemperature shutdown | Latch-type activation at 175°C junction temperature with mandatory 0 V gate recovery - eliminates need for external thermal IC or microcontroller polling. |
| Built-in current limitation | Hard –1.5 A limit enforced independently per channel - protects against sustained short-circuit faults without external sense resistor or amplifier. |
| Dual-MOSFET architecture | Two matched P-channel devices in one SOP-8 package - reduces board area by ~40% vs. discrete dual-switch solutions and ensures thermal coupling for coordinated protection. |
| High short-circuit endurance | Validated operation under repetitive overload pulses (tos1 = 18.6 ms typ) - supports robust motor stall or solenoid energization sequences. |
| Low gate charge & fast switching | td(on) = 1.82 µs, tf = 0.84 µs - enables efficient PWM control up to ~100 kHz while maintaining low gate drive power. |
Applications
| Industrial PLC Output Module | Automotive Body Control Unit |
|---|---|
|
Use Scenario: Driving 12 V DC solenoids, relays, and indicator lamps in programmable logic controller output stages. IC Role / Device Role / Timing Role: High-side load switch with self-protecting thermal/current limits replacing discrete FET + protection IC combinations. Use Value: Eliminates external current-sense amplifiers and thermal sensors, reducing BOM count by 3–4 components per channel while maintaining IEC 61000-4-2/4-4 immunity. |
Use Scenario: Controlling door locks, mirror heaters, and interior lighting in automotive BCMs operating from 9–16 V battery rails. IC Role / Device Role / Timing Role: Fault-tolerant power switch with latch shutdown preventing uncontrolled actuation during overtemperature events. Use Value: Meets ISO 7637-2 pulse 5a surge immunity requirements via built-in avalanche energy rating (EAR = 9.6 mJ) and –60 V VDSS. |
| Medical Infusion Pump Motor Driver | Smart Energy Meter Load Switch |
|
Use Scenario: Enabling/disabling stepper motor phases and valve actuators in Class II medical devices with strict thermal safety margins. IC Role / Device Role / Timing Role: Protected high-side switch ensuring fail-safe shutdown before reaching 150°C channel limit per IEC 60601-1 Clause 11.1. Use Value: Latch-type shutdown prevents automatic restart after fault, satisfying "single-fault condition" safety requirement without firmware intervention. |
Use Scenario: Remote-controlled disconnection of utility meter auxiliary loads (e.g., communication modules, display backlight) during tamper detection or tariff switching. IC Role / Device Role / Timing Role: Low-leakage, high-voltage-rated switch with IDSS ≤ –10 µA at –60 V for >10-year field reliability. Use Value: RDS(on) stability across –40°C to +125°C ambient enables accurate energy accounting without calibration drift. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel protected power switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NVMFS5C464N | No integrated thermal shutdown or current limiting; requires external protection circuitry; RDS(on) = 4.6 mΩ at –10 V (lower on-resistance but no protection). | Suitable only where external fault management is already implemented; not drop-in for thermal-critical designs. | Select only when board space allows separate protection IC and lowest possible conduction loss is prioritized. |
| Vishay SI7157DP-T1-GE3 | Single-channel P-FET; includes thermal shutdown but no current limiting; RDS(on) = 200 mΩ (max) at –4.5 V; SOP-8 package. | Lacks dual-MOSFET redundancy and hard current limit - insufficient for sustained short-circuit scenarios. | Use where cost is primary constraint and load fault profiles are well-bounded with external fusing. |
Compared with NVMFS5C464N and SI7157DP-T1-GE3, the RJE0607JSP-00#J0 uniquely combines dual-channel integration, latch-type thermal shutdown, and hard current limiting in one SOP-8 package - enabling simplified, safety-compliant designs without external protection components.
Availability
RJE0607JSP-00#J0 is available at Aetrix Electronics and suitable for industrial PLC output modules, automotive body control units, and medical infusion pump motor drivers requiring stable component supply, long-term lifecycle support, and guaranteed traceable sourcing.
Supply support for RJE0607JSP-00#J0 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for industrial, automotive, and enterprise applications.
The RJE0607JSP-00#J0 belongs to Renesas' Silicon P-Channel MOSFET Series targeting high-reliability power switching in harsh environments - engineered specifically for self-protected DC load control without external supervision.
FAQ
What is the gate voltage range required to fully turn on the RJE0607JSP-00#J0?
The RJE0607JSP-00#J0 achieves specified RDS(on) performance with VGS = –10 V (typical test condition), and operates reliably across –3.5 V to –12 V. At –6 V, RDS(on) rises to 185 mΩ (typ), so –10 V is recommended for minimal conduction loss. The device remains off below VGS(off) = –2.2 V (min), providing noise margin in noisy industrial environments. This behavior is confirmed in the Electrical Characteristics table on page 2 of R07DS0123EJ0200 Rev.2.00.
Does the RJE0607JSP-00#J0 require an external pull-up resistor on its gate pins?
Yes, the RJE0607JSP-00#J0 gate inputs (pins 2 and 4) must be actively pulled up to ensure defined off-state behavior, as it lacks internal pull-up circuitry. A typical 10 kΩ resistor to –12 V or system rail is used to guarantee VGS ≤ –2.2 V when control signals are inactive. This prevents unintended turn-on due to floating gates - a requirement explicitly supported by the latch-type shutdown architecture which depends on controlled gate voltage removal for recovery. Confirmed in the Outline diagram and Absolute Maximum Ratings section.
How does the latch-type thermal shutdown of the RJE0607JSP-00#J0 recover after activation?
The RJE0607JSP-00#J0 implements a latch-type shutdown that requires complete removal of gate voltage (i.e., VGS ≈ 0 V) to reset - not just reduction below threshold. After Tch ≥ 175°C triggers shutdown, the internal circuit holds the gate low until external drive is disconnected. Recovery occurs only upon reapplying a valid negative gate voltage (e.g., –10 V) after junction cooling. This behavior is documented in the Features list ("Latch type shut down operation (need 0 voltage recovery)") and validated in the Shutdown Time of Load-Short Test graph on page 4.
Can the RJE0607JSP-00#J0 drive inductive loads such as relays or solenoids directly?
Yes, the RJE0607JSP-00#J0 is qualified for inductive load switching, with avalanche energy EAR = 9.6 mJ (typ) and body-drain diode parameters (VDF = 0.83 V, trr = 85 ns) optimized for freewheeling. Its integrated current limiting and thermal shutdown protect against inductive kickback-induced overstress. However, an external flyback diode is still recommended for high-energy loads (>100 mJ) to extend safe operating area beyond the rated avalanche capability. Confirmed in Absolute Maximum Ratings and Typical Operation Characteristics sections.
What is the maximum continuous drain current rating for the RJE0607JSP-00#J0 under standard PCB conditions?
The RJE0607JSP-00#J0 supports ID = –1.5 A continuous under 1-driver operation on FR4 board (40 × 40 × 1.6 mm), with Pch = 2 W derated to 1.5 W for longer pulses (PW ≤ 10 s). This rating assumes Tc ≤ 75°C and accounts for thermal resistance θch-f = 125°C/W. Exceeding these conditions risks premature thermal shutdown activation. These limits are specified in Absolute Maximum Ratings Note 2 and Power vs. Temperature Derating graph on page 3 of R07DS0123EJ0200 Rev.2.00.
RJE0607JSP-00#J0 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Type:
- General Purpose
- Number of Outputs:
- 2
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- -
- Output Type:
- P-Channel
- Interface:
- On/Off
- Voltage - Load:
- -3.5V ~ -12V
- Voltage - Supply (Vcc/Vdd):
- Not Required
- Current - Output (Max):
- 1.5A
- Rds On (Typ):
- 185mOhm
- Input Type:
- Non-Inverting
- Features:
- Latch Function
- Fault Protection:
- Current Limiting (Fixed), Over Temperature
- Operating Temperature:
- 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOP
RJE0607JSP-00#J0 FAQ
1.How can I place an order for RJE0607JSP-00#J0 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJE0607JSP-00#J0 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJE0607JSP-00#J0 reliable?
The price and inventory of RJE0607JSP-00#J0 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJE0607JSP-00#J0 is usually 5 days.
3.What payment methods are accepted for RJE0607JSP-00#J0?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJE0607JSP-00#J0 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJE0607JSP-00#J0?
RJE0607JSP-00#J0 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJE0607JSP-00#J0 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJE0607JSP-00#J0?
For technical support, including RJE0607JSP-00#J0 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJE0607JSP-00#J0 requirements.
6.How does Aetrix verify that RJE0607JSP-00#J0 is sourced from the original manufacturer or authorized distributors?
All RJE0607JSP-00#J0 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJE0607JSP-00#J0 meets industry standards.
7.What is the process for return or replacement of RJE0607JSP-00#J0?
All RJE0607JSP-00#J0 units undergo pre-shipment inspection (PSI). If there is an issue with RJE0607JSP-00#J0, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJE0607JSP-00#J0 part is unused and in its original packaging.
Return procedure for RJE0607JSP-00#J0:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJE0607JSP-00#J0 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
