My Inquiry
My Account
Renesas RJE0609JPD-00#J3
- Part No.:
- RJE0609JPD-00#J3
- Manufacturer:
- Renesas
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
RJE0609JPD-00#J3.pdf
- Description:
- ABU / MOSFET
- Quantity:
- Payment:
- Shipping:
Inventory:2,995
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJE0609JPD-00#J3 from Renesas Electronics is a silicon P-channel MOSFET power switch with integrated overtemperature shutdown, current limiting, and latch-type thermal protection. It delivers 100 mΩ max RDS(on) at VGS = –10 V, supports –60 V VDSS, and operates with logic-level gate drive down to –3.5 V. It is used in automotive body control modules for protected high-side load switching of lamps and solenoids.
For engineers reviewing the RJE0609JPD-00#J3 datasheet, RJE0609JPD-00#J3 pinout, RJE0609JPD-00#J3 application, or RJE0609JPD-00#J3 equivalent, key selection criteria include its built-in thermal shutdown threshold (175°C), latch-type recovery requirement (0 V reset), and –4 A current-limiting behavior under overload conditions.
Technical Context
This device integrates four protection circuits on-die: temperature sensing in the channel, a latch-based gate-shutdown circuit, a current-limiting circuit, and gate resistor matching for controlled dv/dt immunity. Its thermal shutdown activates at Tch = 175°C and requires full gate voltage removal (0 V) to reset - not just reduction.
The MOSFET exhibits RDS(on) = 79–100 mΩ at VGS = –10 V and ID = –2 A, with typical switching times td(on) = 2.97 μs and tf = 1.05 μs under VGS = –10 V, RL = 15 Ω. Its body diode shows VDF = 0.84 V at –4 A and trr = 81 ns, supporting inductive load commutation.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | –60 V: Maximum drain-source blocking voltage for 12 V/24 V automotive systems with load dump margin. |
| RDS(on) max | 100 mΩ @ VGS = –10 V, ID = –2 A: Enables <1 W conduction loss at 3.2 A continuous load. |
| ID limit | –4 A: Hard current clamp prevents destructive runaway during short-circuit events. |
| Tsd | 175°C junction: Thermal shutdown triggers before package or bondwire failure, with latch hold until VGS = 0 V. |
| VGS(th) | –2.2 to –3.4 V: Ensures reliable turn-on with standard 3.3 V or 5 V microcontroller GPIO without level shifters. |
| Qg (derived) | ~22 nC (from Ciss ≈ 1200 pF & VGS swing): Supports 100 kHz PWM switching with moderate gate driver strength. |
| trr | 81 ns: Limits reverse recovery losses in inductive loads like fuel injectors or relay coils. |
Pinout & Package
Package: DPAK (S), JEITA code SC-63, Renesas code PRSS0004ZD-C - surface-mount, single-drain-tab configuration with 3 active terminals and exposed drain pad for thermal conduction.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Gate) | Control input | Accepts logic-level negative voltage; internal gate resistor enables dv/dt immunity ≥500 V/ms. |
| 2 (Drain) | High-side power output | Exposed metal tab - must be soldered to PCB copper pour for thermal management and current return path. |
| 3 (Source) | Reference node | Connected to system ground; defines VGS reference and carries full load current back to supply. |
Key Features
| Feature | Design Value |
|---|---|
| Latch-type thermal shutdown | Prevents repeated cycling during sustained overtemperature; requires explicit 0 V gate reset to restore operation. |
| Built-in current limitation | Clamps drain current at –4 A independent of VGS, eliminating need for external sense resistors or controllers. |
| Logic-level gate drive | Operates fully enhanced at VGS ≤ –3.5 V, compatible with 3.3 V MCU outputs without external drivers. |
| Short-circuit ruggedness | Sustains 68 mJ avalanche energy (IAP = –4 A, Tch = 25°C) and survives repetitive load-dump transients per ISO 7637-2. |
| Integrated temperature sensing | Senses junction temperature directly - no external thermistor or calibration needed for thermal protection. |
Applications
| Automotive Lighting Control | Engine Management Solenoids |
|---|---|
Use Scenario: Switching 12 V halogen or LED headlamps in body control units with EMI and thermal constraints. IC Role / Device Role / Timing Role: High-side protected power switch enabling PWM dimming and open-load detection. Use Value: Built-in current limit and thermal shutdown eliminate discrete protection components, reducing BOM count by ≥3 parts. | Use Scenario: Driving fuel injector or idle air control valves requiring precise on/off timing and fault resilience. IC Role / Device Role / Timing Role: Fault-tolerant high-side driver with fast turn-off (tf = 1.05 μs) and low RDS(on) for minimal power loss. Use Value: 81 ns body diode reverse recovery time minimizes voltage spikes across inductive coils during de-energization. |
| Industrial PLC Output Modules | Commercial HVAC Actuators |
Use Scenario: Solid-state replacement for electromechanical relays in DIN-rail mounted programmable logic controllers. IC Role / Device Role / Timing Role: Protected DC output stage handling 2–4 A resistive or inductive loads with diagnostics. Use Value: Latch-type shutdown prevents nuisance tripping during ambient temperature rise, improving system uptime. | Use Scenario: Controlling damper motors or valve positioners in building automation systems with long cable runs. IC Role / Device Role / Timing Role: High-side switch with integrated overcurrent and overtemperature response for remote field devices. Use Value: –60 V VDSS rating accommodates 24 V nominal systems plus 30 V surge transients per IEC 61000-4-4. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar P-channel protected power switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STP12PF06 | No integrated thermal shutdown or current limiting; discrete protection required; RDS(on) = 120 mΩ @ –10 V. | Suitable only where external fault management is already implemented; higher conduction loss. | Select when cost sensitivity outweighs protection integration and board space is available for discrete circuits. |
| ON Semiconductor NVMFS5C464N | Includes thermal shutdown but not latch-type; auto-recovery after cooldown; RDS(on) = 4.6 mΩ @ –10 V (N-channel, requires high-side driver). | Requires floating gate driver for high-side use; better efficiency but higher system complexity. | Select for high-current (>10 A), low-loss applications where driver ICs and layout area are acceptable. |
Compared with STP12PF06 and NVMFS5C464N, the RJE0609JPD-00#J3 uniquely combines latch-mode thermal protection, current limiting, and logic-level P-channel operation in a single DPAK package - simplifying design for mid-power automotive and industrial loads up to 4 A.
Availability
RJE0609JPD-00#J3 is available at Aetrix Electronics and suitable for automotive lighting control, engine management solenoid driving, and industrial PLC output modules requiring stable component supply and long-term lifecycle support.
Supply support for RJE0609JPD-00#J3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, and power devices for automotive, industrial, and infrastructure markets.
The RJE0609JPD series belongs to Renesas' protected power switch product line, designed specifically for high-reliability 12 V/24 V automotive and industrial load switching where integrated fault protection reduces system-level design risk.
FAQ
What is the gate voltage range required to fully enhance the RJE0609JPD-00#J3?
The RJE0609JPD-00#J3 achieves full enhancement at VGS ≤ –3.5 V, with guaranteed RDS(on) performance down to –10 V. Its gate threshold voltage (VGS(off)) ranges from –2.2 V to –3.4 V, ensuring compatibility with 3.3 V and 5 V microcontroller outputs without external level shifting. The RJE0609JPD-00#J3 does not require positive gate drive and operates exclusively with negative gate-to-source bias.
Does the RJE0609JPD-00#J3 require an external pull-down resistor on the gate?
No, the RJE0609JPD-00#J3 integrates an internal gate resistor optimized for dv/dt immunity (≥500 V/ms), eliminating the need for an external pull-down. However, a 10 kΩ external pull-down is recommended during power-up sequencing to ensure defined off-state before controller initialization. This ensures predictable behavior in the RJE0609JPD-00#J3 during system boot.
How does the latch-type thermal shutdown in the RJE0609JPD-00#J3 differ from auto-recovery types?
The RJE0609JPD-00#J3 uses a latch-type shutdown that holds the gate off until VGS is actively driven to 0 V - not merely reduced. Unlike auto-recovery devices, it will not restart after cooling unless the gate signal is fully removed and re-applied. This prevents uncontrolled cycling during sustained overload, making the RJE0609JPD-00#J3 appropriate for safety-critical load switching where fault persistence must be explicitly acknowledged.
Can the RJE0609JPD-00#J3 be used in parallel configurations for higher current handling?
Parallel operation of the RJE0609JPD-00#J3 is not recommended due to mismatch in RDS(on) (79–100 mΩ), thermal coupling limitations in DPAK packages, and lack of synchronized shutdown behavior. Each RJE0609JPD-00#J3 must be independently controlled and protected. For >4 A applications, select a single higher-rated device such as the RJE0612JPD instead of paralleling RJE0609JPD-00#J3 units.
What is the maximum allowable case temperature for continuous operation of the RJE0609JPD-00#J3?
The RJE0609JPD-00#J3 specifies a maximum channel temperature (Tch) of 150°C and a thermal shutdown trigger at 175°C. For continuous DC operation, the case temperature (Tc) must remain ≤125°C to maintain safe margin below shutdown, assuming θch–c = 4.17°C/W and adequate PCB copper area. Derating curves on page 3 of the datasheet confirm 30 W channel dissipation only at Tc = 25°C - the RJE0609JPD-00#J3 must be thermally designed for real-world board conditions.
RJE0609JPD-00#J3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Type:
- General Purpose
- Number of Outputs:
- 1
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- -
- Output Type:
- P-Channel
- Interface:
- On/Off
- Voltage - Load:
- -3.5V ~ -12V
- Voltage - Supply (Vcc/Vdd):
- Not Required
- Current - Output (Max):
- 4A
- Rds On (Typ):
- 102mOhm
- Input Type:
- Non-Inverting
- Features:
- Latch Function
- Fault Protection:
- Current Limiting (Fixed), Over Temperature
- Operating Temperature:
- 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DPAK-3
RJE0609JPD-00#J3 FAQ
1.How can I place an order for RJE0609JPD-00#J3 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJE0609JPD-00#J3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJE0609JPD-00#J3 reliable?
The price and inventory of RJE0609JPD-00#J3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJE0609JPD-00#J3 is usually 5 days.
3.What payment methods are accepted for RJE0609JPD-00#J3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJE0609JPD-00#J3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJE0609JPD-00#J3?
RJE0609JPD-00#J3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJE0609JPD-00#J3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJE0609JPD-00#J3?
For technical support, including RJE0609JPD-00#J3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJE0609JPD-00#J3 requirements.
6.How does Aetrix verify that RJE0609JPD-00#J3 is sourced from the original manufacturer or authorized distributors?
All RJE0609JPD-00#J3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJE0609JPD-00#J3 meets industry standards.
7.What is the process for return or replacement of RJE0609JPD-00#J3?
All RJE0609JPD-00#J3 units undergo pre-shipment inspection (PSI). If there is an issue with RJE0609JPD-00#J3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJE0609JPD-00#J3 part is unused and in its original packaging.
Return procedure for RJE0609JPD-00#J3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJE0609JPD-00#J3 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
