My Inquiry
My Account
Renesas RJF0410JPE-00#J3
- Part No.:
- RJF0410JPE-00#J3
- Manufacturer:
- Renesas
- Package:
- SC-83
- Datasheet:
-
RJF0410JPE-00#J3.pdf
- Description:
- ABU / MOSFET
- Quantity:
- Payment:
- Shipping:
Inventory:3,100
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RJF0410JPE-00#J3 from Renesas Electronics is a 40 V, 40 A N-channel thermal protection power switch with integrated overtemperature shutdown, current limiting, and latch-type fault recovery. It operates at logic-level gate drive (3.5–12 V), delivers RDS(on) as low as 9 mΩ at 10 VGS, and is AEC-Q101 qualified for automotive power distribution and motor control applications.
For engineers reviewing the RJF0410JPE-00#J3 datasheet, RJF0410JPE-00#J3 pinout, RJF0410JPE-00#J3 application, or RJF0410JPE-00#J3 equivalent, this device serves as a robust, self-protecting high-side or low-side switching solution where short-circuit endurance, junction temperature monitoring, and fail-safe shutdown are critical design requirements.
Technical Context
The RJF0410JPE-00#J3 integrates a temperature-sensing circuit in the gate region that triggers latch-type shutdown when channel temperature reaches 175°C - requiring full gate voltage removal to reset. Its built-in current limitation circuit enforces a 40 A upper bound under VGS = 5 V, VDS = 10 V conditions, independent of external sensing.
This Thermal FET combines MOSFET conduction with analog protection logic: the gate-shutdown circuit actively pulls down gate voltage during overtemperature events, while the body diode supports bidirectional current flow with 0.9 V forward drop at 40 A. It is rated for 960 mJ avalanche energy and operates within a 150°C channel temperature limit.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDSS | 40 V - Maximum drain-source blocking voltage; suitable for 12 V automotive systems with load-dump margin. |
| RDS(on) | 9–13 mΩ at VGS = 10 V, ID = 20 A - Enables <1 W conduction loss at 40 A, reducing heatsink requirements. |
| Tsd | 175°C - Junction temperature threshold for automatic latch-type shutdown; prevents thermal runaway without external controller. |
| ID(limit) | 40 A - Built-in current clamp ensures predictable fault current during short circuits; no external sense resistor needed. |
| VGS(th) | 1.1–2.1 V - Low threshold enables direct interfacing with 3.3 V or 5 V microcontrollers without level shifting. |
| Pch | 100 W at Tc = 25°C - Specifies maximum continuous power dissipation at case temperature; derates linearly above 25°C. |
| Avalanche Energy | 960 mJ - Withstands repetitive inductive switching stress in motor drives and solenoid controls without failure. |
Pinout & Package
Package: LDPAK(S)-(1) (RENESAS code PRSS0004AE-B), surface-mount, thermally enhanced 4-pin package with dual drain terminals for current sharing and low-inductance layout.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Gate) | Control input | Accepts logic-level voltage (3.5–12 V); internal gate resistor and protection circuitry enable direct MCU drive. |
| 2 (Drain) | High-side power input / output node | Primary high-current path; electrically tied to Pin 4; designed for PCB copper pour connection to minimize thermal resistance. |
| 3 (Source) | Power return / reference node | Common source terminal; connects to ground or load return; used as reference for internal temperature and current sensing. |
| 4 (Drain) | Secondary high-side power node | Parallel drain connection to Pin 2; reduces package inductance and improves current sharing in high-di/dt applications. |
Key Features
| Feature | Design Value |
|---|---|
| Latch-type overtemperature shutdown | Triggers at 175°C junction temperature and holds off until gate voltage is fully removed - eliminates nuisance tripping during transient overload. |
| Built-in current limitation | Clamps drain current to ≤40 A under defined VGS/VDS conditions - removes need for external current-sense amplifier and comparator loop. |
| Logic-level gate drive | Operates with VGS as low as 3.5 V - compatible with standard 3.3 V and 5 V digital outputs without gate driver ICs. |
| AEC-Q101 qualification | Validated for automotive-grade reliability including temperature cycling, HTRB, and ESD - suitable for under-hood power modules. |
| High short-circuit endurance | Sustains 12 A avalanche current with 960 mJ energy rating - protects against inductive kickback in motor and relay driving. |
Applications
| Automotive Body Control Module (BCM) | Electric Power Steering (EPS) Motor Driver |
|---|---|
|
Use Scenario: Switching headlamp, fog lamp, or HVAC blower loads in vehicle body electronics. IC Role / Device Role / Timing Role: High-side power switch with integrated thermal and overcurrent protection. Use Value: Eliminates need for discrete current-sense IC and thermal monitor, reducing BOM count and PCB area by >3 components per channel. |
Use Scenario: Driving EPS assist motor phase windings in safety-critical steering systems. IC Role / Device Role / Timing Role: Protected low-side switching element in half-bridge configuration. Use Value: Latch-type shutdown prevents uncontrolled motor motion during overtemperature, supporting ASIL-B functional safety requirements. |
| Industrial PLC Output Module | 12 V DC Power Distribution Unit |
|
Use Scenario: Solid-state replacement for electromechanical relays in programmable logic controller output stages. IC Role / Device Role / Timing Role: Self-protected switching device handling 40 A resistive/inductive loads. Use Value: Withstands repeated short-circuit events without degradation, enabling maintenance-free operation over 10+ years. |
Use Scenario: Centralized power routing for multiple subsystems in telecom or transportation equipment. IC Role / Device Role / Timing Role: Primary current-limited power switch with thermal foldback behavior. Use Value: Built-in 40 A current limit and 175°C shutdown provide deterministic fault response, simplifying system-level protection design. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-current protected switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STL220N4F7AG | 40 V, 220 A nominal, no integrated thermal shutdown; requires external temperature monitoring and current sense. | Higher peak current capability but lacks autonomous protection - demands additional ICs for equivalent safety coverage. | Select when higher pulse current is required and system-level protection is already implemented. |
| ON Semiconductor NTMFS4C09NT1G | 40 V, 100 A, RDS(on) = 3.4 mΩ, no integrated overtemperature or current-limit circuitry. | Lower on-resistance but zero built-in protection - unsuitable for standalone fault-tolerant designs without support circuitry. | Choose for efficiency-critical, non-safety applications where external protection is acceptable and board space allows extra components. |
Compared with STL220N4F7AG and NTMFS4C09NT1G, the RJF0410JPE-00#J3 trades modest RDS(on) for autonomous, single-chip protection - reducing system complexity, validation effort, and failure modes in automotive and industrial power switching.
Availability
RJF0410JPE-00#J3 is available at Aetrix Electronics and suitable for automotive body control, industrial PLC output stages, and 12 V power distribution systems requiring stable component supply, long-term lifecycle support, and AEC-Q101 compliance.
Supply support for RJF0410JPE-00#J3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a Japanese semiconductor manufacturer specializing in microcontrollers, analog power devices, and automotive SoCs, with global R&D and manufacturing infrastructure.
The RJF0410JPE-00#J3 belongs to Renesas' Thermal FET family - engineered specifically for automotive and industrial power switching where autonomous thermal and overcurrent protection replace complex external monitoring circuits.
FAQ
What is the gate voltage range required to fully turn on the RJF0410JPE-00#J3?
The RJF0410JPE-00#J3 achieves its specified RDS(on) of 9–13 mΩ when driven with VGS = 10 V. It begins conducting significantly at VGS ≥ 3.5 V and remains fully enhanced up to VGS = 12 V. Gate voltage must not exceed +16 V or fall below –2.5 V to avoid damage. The RJF0410JPE-00#J3 is optimized for direct interface with 3.3 V and 5 V logic outputs.
Does the RJF0410JPE-00#J3 require an external pull-down resistor on the gate?
Yes - although the RJF0410JPE-00#J3 includes internal gate protection circuitry, Renesas recommends a 10 kΩ external pull-down resistor between gate and source to ensure reliable turn-off during MCU reset or power-up sequences. This prevents unintended conduction due to floating gate voltage, especially in noisy automotive environments where the RJF0410JPE-00#J3 is commonly deployed.
How does the latch-type shutdown of the RJF0410JPE-00#J3 recover after an overtemperature event?
The RJF0410JPE-00#J3 uses a latch-type shutdown mechanism: once junction temperature reaches 175°C, the internal circuit forcibly discharges the gate and holds it near 0 V until external gate drive is completely removed. Recovery requires removing all gate voltage (VGS ≈ 0 V) for ≥100 µs, then reapplying a valid turn-on signal. This prevents oscillatory behavior during thermal transients and ensures safe restart only after cooling begins - a key feature of the RJF0410JPE-00#J3.
Can the RJF0410JPE-00#J3 be used in high-side switching configurations?
Yes - the RJF0410JPE-00#J3 supports both high-side and low-side switching. In high-side use, its logic-level gate drive allows compatibility with bootstrap or charge-pump gate drivers. The dual-drain package (Pins 2 and 4) facilitates low-inductance PCB layout, and the integrated current limit (40 A) and thermal shutdown (175°C) remain fully functional regardless of topology. System designers confirm successful high-side deployment of the RJF0410JPE-00#J3 in BCM and EPS applications.
Is the RJF0410JPE-00#J3 RoHS compliant and lead-free?
Yes - the RJF0410JPE-00#J3 is RoHS compliant and lead-free, meeting EU Directive 2011/65/EU requirements. Renesas specifies halogen-free molding compound and Pb-free termination finish per J-STD-609. The device carries the "EU RoHS Compliant" marking on its top-side laser label, and full material declarations are available through Renesas' environmental portal. This compliance applies to all units of the RJF0410JPE-00#J3 shipped since 2015.
RJF0410JPE-00#J3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- SC-83
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Type:
- General Purpose
- Number of Outputs:
- 1
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- -
- Output Type:
- N-Channel
- Interface:
- On/Off
- Voltage - Load:
- 3.5V ~ 12V
- Voltage - Supply (Vcc/Vdd):
- Not Required
- Current - Output (Max):
- 40A
- Rds On (Typ):
- 11.3mOhm
- Input Type:
- Non-Inverting
- Features:
- Latch Function
- Fault Protection:
- Current Limiting (Fixed), Over Temperature
- Operating Temperature:
- 150°C
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- LDPAK
RJF0410JPE-00#J3 FAQ
1.How can I place an order for RJF0410JPE-00#J3 through Aetrix?
Please submit a Request for Quotation (RFQ) for RJF0410JPE-00#J3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RJF0410JPE-00#J3 reliable?
The price and inventory of RJF0410JPE-00#J3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RJF0410JPE-00#J3 is usually 5 days.
3.What payment methods are accepted for RJF0410JPE-00#J3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RJF0410JPE-00#J3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RJF0410JPE-00#J3?
RJF0410JPE-00#J3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RJF0410JPE-00#J3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RJF0410JPE-00#J3?
For technical support, including RJF0410JPE-00#J3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RJF0410JPE-00#J3 requirements.
6.How does Aetrix verify that RJF0410JPE-00#J3 is sourced from the original manufacturer or authorized distributors?
All RJF0410JPE-00#J3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RJF0410JPE-00#J3 meets industry standards.
7.What is the process for return or replacement of RJF0410JPE-00#J3?
All RJF0410JPE-00#J3 units undergo pre-shipment inspection (PSI). If there is an issue with RJF0410JPE-00#J3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RJF0410JPE-00#J3 part is unused and in its original packaging.
Return procedure for RJF0410JPE-00#J3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RJF0410JPE-00#J3 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
