My Inquiry
My Account
Toshiba Semiconductor and Storage RN2410,LXHF
- Part No.:
- RN2410,LXHF
- Manufacturer:
- Toshiba Semiconductor and Storage
- Category:
- Single, Pre-Biased Bipolar Transistors
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
RN2410,LXHF.pdf
- Description:
- TRANS PREBIAS PNP 50V SMINI
- Quantity:
- Payment:
- Shipping:
Inventory:5,364
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RN2410,LXHF from Toshiba Electronic Devices & Storage Corporation is a silicon PNP epitaxial bipolar transistor with integrated bias resistors (R1 = 4.7 kΩ), rated for VCEO = −50 V, IC = −100 mA, and PC = 200 mW in S-Mini package. It serves as a compact switching device in automotive-grade interface and driver circuits where space-constrained PCB layouts require reduced external component count.
For engineers reviewing the RN2410,LXHF datasheet, RN2410,LXHF pinout, RN2410,LXHF application, or RN2410,LXHF equivalent, this AEC-Q101-qualified discrete transistor offers verified DC current gain (hFE = 120–400 at IC = −1 mA), low saturation voltage (VCE(sat) ≤ −0.3 V at IC = −5 mA/IB = −0.25 mA), and stable transition frequency (fT = 6 MHz) for reliable low-power signal control.
Technical Context
This PNP digital transistor integrates a single 4.7 kΩ base-emitter pull-up resistor (R1) to enable direct logic-level drive without external biasing components. Its PCT process ensures consistent hFE distribution and low leakage (ICBO ≤ −100 nA at VCB = −50 V).
The device operates within −55 °C to 150 °C junction temperature range and supports switching applications up to fT = 6 MHz. Its complementary pair is RN1410/RN1411, and it shares identical S-Mini pinout and thermal characteristics with RN2411,LXHF but differs in hFE min/max and R1 value.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | −50 V: Maximum allowable collector-emitter voltage before breakdown in common-emitter configuration. |
| IC | −100 mA: Continuous DC collector current rating under specified thermal conditions. |
| PC | 200 mW: Maximum power dissipation at Ta = 25 °C; derates linearly above 25 °C ambient. |
| hFE | 120–400: DC current gain range at VCE = −5 V, IC = −1 mA - determines base drive requirements. |
| VCE(sat) | ≤ −0.3 V: Collector-emitter saturation voltage at IC = −5 mA / IB = −0.25 mA - defines on-state conduction loss. |
| fT | 6 MHz: Transition frequency - upper limit for small-signal amplification or high-speed switching. |
| R1 | 4.7 kΩ: Integrated base-emitter resistor - eliminates need for external bias network in simple switch designs. |
Pinout & Package
S-Mini package (12 mg typical weight), surface-mount, 3-pin plastic molded case with gull-wing leads. Dimensions comply with JEDEC TO-236AB outline.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Base | Input terminal connected internally to R1; accepts logic-level or analog control signals. |
| 2 | Emitter | Common reference node; tied to higher potential in PNP operation (e.g., VCC rail). |
| 3 | Collector | Output terminal; sinks current when biased on - used for load switching or level translation. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive applications per stress test requirements including HTOL, TC, HAST, and ESD. |
| Integrated R1 = 4.7 kΩ | Enables single-resistor biasing - reduces BOM count and PCB area vs. discrete transistor + two external resistors. |
| Low VCE(sat) ≤ −0.3 V | Minimizes power loss and self-heating during saturated switching in 5 V or 3.3 V logic-driven loads. |
| Complementary pairing | Designed to match RN1410/RN1411 NPN counterparts for push-pull or totem-pole output stages. |
Applications
| Automotive Door Module Switching | Industrial PLC Input Interface |
|---|---|
Use Scenario: Controlling LED status indicators and small solenoid drivers in door control units with 12 V supply and microcontroller GPIO. IC Role / Device Role / Timing Role: PNP switch enabling high-side load activation with logic-inverted control from MCU. Use Value: Integrated R1 eliminates external pull-up resistor; AEC-Q101 qualification ensures reliability across temperature cycling and vibration profiles. | Use Scenario: Level-shifting and isolation between 24 V field sensors and 3.3 V FPGA I/O banks in programmable logic controllers. IC Role / Device Role / Timing Role: Signal conditioning transistor providing galvanic decoupling and voltage translation. Use Value: VCEO = −50 V withstands industrial transients; low leakage (ICBO ≤ −100 nA) maintains signal integrity in high-impedance sensing paths. |
| Consumer Appliance Inverter Control | Medical Diagnostic Equipment Driver |
Use Scenario: Driving gate resistors of MOSFETs in half-bridge inverters for brushless DC motor control in HVAC blowers. IC Role / Device Role / Timing Role: Low-power pre-driver stage ensuring fast turn-on/turn-off timing for power switches. Use Value: fT = 6 MHz supports clean edge transitions; S-Mini footprint allows dense placement near power stage layout. | Use Scenario: Enabling isolated relay coils and optocoupler LEDs in Class II medical devices requiring reinforced insulation and low leakage. IC Role / Device Role / Timing Role: Safe, low-current switching element compliant with IEC 60601 creepage/clearance constraints. Use Value: Tj = 150 °C rating accommodates sealed enclosure thermal environments; RoHS-compliant LXHF suffix confirms lead-free finish. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar PNP digital transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NSV2410MUT1G | Higher hFE (160–400), same R1 = 4.7 kΩ, but rated only for general use (not AEC-Q101). | Lacks automotive qualification; unsuitable for safety-critical vehicle subsystems. | Select when AEC-Q101 is not required and higher gain consistency is prioritized. |
| UMT2410L | Same S-Mini package and pinout, but R1 = 10 kΩ and hFE min = 80 - lower drive capability. | Requires higher base current for equivalent saturation; less suitable for low-I/O-drive MCUs. | Choose only if circuit design accommodates reduced hFE and increased R1-induced delay. |
Compared with NSV2410MUT1G and UMT2410L, RN2410,LXHF uniquely combines AEC-Q101 qualification, 4.7 kΩ input resistance, and guaranteed hFE ≥ 120 - making it the preferred choice for automotive body electronics and industrial control systems demanding validated reliability and predictable turn-on behavior.
Availability
RN2410,LXHF is available at Aetrix Electronics and suitable for automotive door modules, industrial PLC interfaces, consumer appliance inverters, and medical diagnostic equipment requiring stable component supply with full traceability and long-term lifecycle support.
Supply support for RN2410,LXHF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Toshiba Electronic Devices & Storage Corporation designs and manufactures discrete semiconductors, power devices, and logic ICs with emphasis on automotive, industrial, and consumer reliability standards.
RN2410,LXHF belongs to Toshiba's bias-resistor-equipped transistor (BRT) product line, engineered specifically for reducing external component count and improving assembly yield in space-constrained switching applications.
FAQ
What is the function of the integrated resistor in RN2410,LXHF?
The RN2410,LXHF integrates a 4.7 kΩ resistor (R1) between base and emitter terminals. This enables direct connection to logic outputs without external bias components, simplifying circuit design and reducing PCB area. The resistor sets the base current path for predictable turn-on behavior in switching applications, and its value is fixed and tested per unit during manufacturing.
Is RN2410,LXHF qualified for automotive applications?
Yes, RN2410,LXHF is AEC-Q101 qualified, as confirmed in Toshiba's official orderable part number list. This qualification covers stress tests including high-temperature operating life, temperature cycling, and electrostatic discharge - validating its suitability for non-safety-critical automotive subsystems such as body control modules and lighting drivers.
What package type does RN2410,LXHF use and what are its dimensions?
RN2410,LXHF uses the S-Mini package (JEDEC TO-236AB), a surface-mount 3-pin plastic case with gull-wing leads. Its nominal dimensions are 2.9 mm × 1.3 mm × 0.9 mm (L × W × H), and typical weight is 12 mg. Pin 1 is Base, Pin 2 is Emitter, and Pin 3 is Collector - matching standard S-Mini mechanical and thermal specifications.
How does RN2410,LXHF differ from RN2411,LXHF?
RN2410,LXHF and RN2411,LXHF share identical package, pinout, and absolute maximum ratings, but differ in electrical characteristics: RN2410,LXHF has hFE = 120–400 and R1 = 4.7 kΩ, while RN2411,LXHF specifies hFE = 200–400 and R1 = 10 kΩ. These differences affect base drive sensitivity and saturation performance in precision switching designs.
What is the maximum operating junction temperature for RN2410,LXHF?
The maximum rated junction temperature (Tj) for RN2410,LXHF is 150 °C, as specified in Toshiba's Absolute Maximum Ratings table. This value defines the upper thermal limit for safe semiconductor operation; sustained operation near this limit requires appropriate PCB copper area, airflow, or thermal vias to maintain junction temperature within specification under actual load conditions.
RN2410,LXHF Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Toshiba Semiconductor and Storage
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Transistor Type:
- PNP - Pre-Biased
- Current - Collector (Ic) (Max):
- 100 mA
- Voltage - Collector Emitter Breakdown (Max):
- 50 V
- Resistor - Base (R1):
- 4.7 kOhms
- Resistor - Emitter Base (R2):
- -
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 120 @ 1mA, 5V
- Vce Saturation (Max) @ Ib, Ic:
- 300mV @ 250µA, 5mA
- Current - Collector Cutoff (Max):
- 100nA (ICBO)
- Frequency - Transition:
- 200 MHz
- Power - Max:
- 200 mW
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- S-Mini
RN2410,LXHF FAQ
1.How can I place an order for RN2410,LXHF through Aetrix?
Please submit a Request for Quotation (RFQ) for RN2410,LXHF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RN2410,LXHF reliable?
The price and inventory of RN2410,LXHF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RN2410,LXHF is usually 5 days.
3.What payment methods are accepted for RN2410,LXHF?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RN2410,LXHF transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RN2410,LXHF?
RN2410,LXHF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RN2410,LXHF order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RN2410,LXHF?
For technical support, including RN2410,LXHF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RN2410,LXHF requirements.
6.How does Aetrix verify that RN2410,LXHF is sourced from the original manufacturer or authorized distributors?
All RN2410,LXHF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RN2410,LXHF meets industry standards.
7.What is the process for return or replacement of RN2410,LXHF?
All RN2410,LXHF units undergo pre-shipment inspection (PSI). If there is an issue with RN2410,LXHF, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RN2410,LXHF part is unused and in its original packaging.
Return procedure for RN2410,LXHF:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RN2410,LXHF Tags
-
MUN5211T1G
onsemi
-
DTC043ZEBTL
Rohm Semiconductor
-
DTC114EKAT146
Rohm Semiconductor
-
DDTD113ZC-7-F
Diodes Incorporated
-
DRDNB16W-7
Diodes Incorporated
-
PDTC114ET,215
Nexperia USA Inc.
-
PDTC143ZT,215
Nexperia USA Inc.
-
PDTC143ET,215
Nexperia USA Inc.
-
PDTC143XT,215
Nexperia USA Inc.
-
MMUN2211LT1G
onsemi
-
PDTC144ET,215
Nexperia USA Inc.
-
PDTC124ET,215
Nexperia USA Inc.
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
