My Inquiry
My Account
Toshiba Semiconductor and Storage RN2413,LXHF
- Part No.:
- RN2413,LXHF
- Manufacturer:
- Toshiba Semiconductor and Storage
- Category:
- Single, Pre-Biased Bipolar Transistors
- Package:
- TO-236-3, SC-59, SOT-23-3
- Datasheet:
-
RN2413,LXHF.pdf
- Description:
- TRANS PREBIAS PNP 50V SMINI
- Quantity:
- Payment:
- Shipping:
Inventory:3,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RN2413,LXHF from Toshiba Electronic Devices & Storage Corporation is a silicon PNP epitaxial bipolar transistor with integrated bias resistors (PCT process), rated for VCEO = -50 V, IC = -100 mA, and PC = 200 mW. It delivers hFE = 120–400 at IC = -1 mA, VCE = -5 V, and VCE(sat) = -0.3 V at IC = -5 mA/IB = -0.25 mA, enabling compact switching and driver functions in automotive-grade signal interfacing circuits.
For engineers reviewing the RN2413,LXHF datasheet, RN2413,LXHF pinout, RN2413,LXHF application, or RN2413,LXHF equivalent, key selection criteria include its AEC-Q101 qualification, S-Mini package footprint, built-in R1 = 47 kΩ input resistor, complementary pairing with RN1413, and guaranteed VCEO/VCEO derating behavior across -55 °C to 150 °C junction temperature range.
Technical Context
This PNP digital transistor integrates a single 47 kΩ base-emitter pull-up resistor (R1), eliminating external bias components in low-side switch configurations. Its PCT process ensures stable hFE and low VCE(sat) under pulsed and DC drive conditions up to 100 mA collector current.
The device operates as a saturated switch with defined turn-on/off timing via R1-controlled base current, supporting reliable interfacing between microcontrollers and inductive loads such as relays or LEDs without additional discrete resistors.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | -50 V - Maximum allowable collector-emitter voltage before breakdown in common-emitter configuration |
| IC | -100 mA - Continuous DC collector current rating defining safe switching load capacity |
| PC | 200 mW - Total power dissipation limit at Ta = 25 °C, requiring thermal derating above ambient |
| hFE | 120–400 - DC current gain range at VCE = -5 V, IC = -1 mA, determining base drive sensitivity |
| VCE(sat) | -0.3 V max - Saturation voltage at IC = -5 mA / IB = -0.25 mA, defining on-state conduction loss |
| R1 | 47 kΩ - Integrated base resistor value enabling direct MCU GPIO connection without external bias network |
| fT | 6 MHz - Transition frequency indicating usable bandwidth for small-signal amplification or fast switching |
Pinout & Package
Package: S-Mini (JEDEC TO-236AB), 3-pin surface-mount plastic package, 1.6 × 2.8 × 1.1 mm, 12 mg typical weight.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Base | Input terminal for control current; internally connected to 47 kΩ resistor (R1) to emitter |
| 2 | Emitter | Common reference node; tied to internal R1 and external circuit ground or logic low rail |
| 3 | Collector | Output terminal sourcing current to load; connects to positive supply via switched load |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive applications including engine control modules and body electronics per stress test requirements |
| Integrated 47 kΩ base resistor | Eliminates need for external bias network, reducing BOM count and PCB area in GPIO-driven switches |
| Complementary pair with RN1413 | Enables balanced NPN/PNP driver stages in H-bridge or push-pull output circuits |
| S-Mini package footprint | Standardized 3-pin SMT outline compatible with automated placement and reflow processes |
Applications
| Automotive Body Control Module | Industrial PLC Output Stage |
|---|---|
Use Scenario: Driving 12 V solenoid valves and LED status indicators in door lock and lighting control units. IC Role / Device Role / Timing Role: Low-side saturated switch controlled directly by 3.3 V/5 V microcontroller GPIO pins. Use Value: Built-in 47 kΩ resistor enables direct interface without level-shifting or external biasing, reducing component count by one per channel. | Use Scenario: Isolating and amplifying digital outputs from programmable logic controllers to 24 V field devices. IC Role / Device Role / Timing Role: Interface transistor translating TTL/CMOS logic levels to industrial 24 V sink outputs. Use Value: Guaranteed -50 V VCEO and -100 mA IC rating ensure robust operation under inductive kickback and transient overvoltage conditions. |
| Consumer Appliance Power Sequencing | Medical Diagnostic Equipment Signal Conditioning |
Use Scenario: Enabling sequential power-up of subsystems (e.g., display backlight, sensor array, comms module) in smart home hubs. IC Role / Device Role / Timing Role: Discrete logic-level switch controlling enable lines of DC-DC converters and LDOs. Use Value: Stable hFE (120–400) and low VCE(sat) (-0.3 V max) minimize voltage drop and heat generation during sustained on-state operation. | Use Scenario: Level-shifting and buffering analog front-end control signals in portable ultrasound and ECG units. IC Role / Device Role / Timing Role: Signal interface element isolating sensitive analog sections from digital control logic. Use Value: AEC-Q101 qualification provides proven reliability and low parametric drift over temperature, supporting long-term calibration stability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar PNP digital transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NSV2413MUT1G | Higher VCEO (-60 V), lower hFE (80–250), same S-Mini package and R1 = 47 kΩ | Better suited for higher-voltage industrial controls where margin beyond -50 V is required | Select when operating near absolute maximum ratings or requiring extended voltage headroom |
| UMT2413L | Same VCEO (-50 V), identical hFE and R1 specs, but rated only for general use (not AEC-Q101) | Applicable in non-automotive consumer or industrial designs where qualification is not mandated | Choose for cost-sensitive non-automotive applications with identical electrical performance |
Compared with NSV2413MUT1G and UMT2413L, RN2413,LXHF uniquely combines AEC-Q101 qualification, 47 kΩ integrated bias resistance, and guaranteed -50 V VCEO in the S-Mini footprint-making it the preferred choice for automotive body electronics where reliability and standardized qualification are mandatory.
Availability
RN2413,LXHF is available at Aetrix Electronics and suitable for automotive body control modules, industrial PLC output stages, and consumer appliance power sequencing requiring stable component supply and AEC-Q101 compliance.
Supply support for RN2413,LXHF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Toshiba Electronic Devices & Storage Corporation designs and manufactures high-reliability semiconductor components for automotive, industrial, and consumer applications, with core expertise in discrete power devices and analog ICs.
The RN2413,LXHF belongs to Toshiba's bias-resistor-equipped transistor (BRT) product line, engineered specifically for space-constrained, high-volume switching applications where reduced external component count and AEC-Q101 assurance are critical design requirements.
FAQ
What is the package type and pin configuration of RN2413,LXHF?
RN2413,LXHF uses the S-Mini (TO-236AB) surface-mount package with three terminals: Pin 1 is Base (internally connected to 47 kΩ resistor), Pin 2 is Emitter, and Pin 3 is Collector. This standardized 1.6 × 2.8 mm outline supports automated assembly and is documented in Toshiba's official package drawing Rev.2.0.A.
Is RN2413,LXHF qualified for automotive applications?
Yes, RN2413,LXHF is explicitly AEC-Q101 qualified, as confirmed in Toshiba's orderable part number table and datasheet Rev.2.0.A. This qualification covers stress testing for temperature cycling, humidity, mechanical shock, and high-temperature operating life-making RN2413,LXHF suitable for automotive body electronics and non-safety-critical control systems.
What is the value and function of the built-in resistor in RN2413,LXHF?
The RN2413,LXHF integrates a single 47 kΩ resistor (R1) between Base and Emitter. This resistor provides automatic biasing for saturation-mode switching, allowing direct connection to 3.3 V or 5 V logic outputs without external components-reducing PCB area, BOM count, and assembly time while maintaining predictable turn-on characteristics.
How does RN2413,LXHF differ from RN2412,LXHF?
RN2413,LXHF and RN2412,LXHF share identical package, pinout, and bias resistor value (47 kΩ), but differ in DC current gain: RN2413,LXHF specifies hFE = 120–400 at IC = -1 mA, whereas RN2412,LXHF offers hFE = 200–400. This makes RN2413,LXHF better suited for applications requiring guaranteed minimum gain down to 120, such as marginal drive conditions or wide-temperature operation.
What are the absolute maximum ratings for RN2413,LXHF?
RN2413,LXHF has VCBO = -50 V, VCEO = -50 V, VEBO = -5 V, IC = -100 mA, PC = 200 mW, Tj = 150 °C, and Tstg = -55 to 150 °C. These limits define safe operating boundaries; continuous operation near these values requires thermal derating per Toshiba's Reliability Handbook and must avoid simultaneous high voltage/current/temperature stress.
RN2413,LXHF Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Toshiba Semiconductor and Storage
- Series:
- -
- Package/Case:
- TO-236-3, SC-59, SOT-23-3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Transistor Type:
- PNP - Pre-Biased
- Current - Collector (Ic) (Max):
- 100 mA
- Voltage - Collector Emitter Breakdown (Max):
- 50 V
- Resistor - Base (R1):
- 47 kOhms
- Resistor - Emitter Base (R2):
- -
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 120 @ 1mA, 5V
- Vce Saturation (Max) @ Ib, Ic:
- 300mV @ 250µA, 5mA
- Current - Collector Cutoff (Max):
- 100nA (ICBO)
- Frequency - Transition:
- 200 MHz
- Power - Max:
- 200 mW
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- S-Mini
RN2413,LXHF FAQ
1.How can I place an order for RN2413,LXHF through Aetrix?
Please submit a Request for Quotation (RFQ) for RN2413,LXHF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RN2413,LXHF reliable?
The price and inventory of RN2413,LXHF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RN2413,LXHF is usually 5 days.
3.What payment methods are accepted for RN2413,LXHF?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RN2413,LXHF transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RN2413,LXHF?
RN2413,LXHF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RN2413,LXHF order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RN2413,LXHF?
For technical support, including RN2413,LXHF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RN2413,LXHF requirements.
6.How does Aetrix verify that RN2413,LXHF is sourced from the original manufacturer or authorized distributors?
All RN2413,LXHF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RN2413,LXHF meets industry standards.
7.What is the process for return or replacement of RN2413,LXHF?
All RN2413,LXHF units undergo pre-shipment inspection (PSI). If there is an issue with RN2413,LXHF, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RN2413,LXHF part is unused and in its original packaging.
Return procedure for RN2413,LXHF:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RN2413,LXHF Tags
-
MUN5211T1G
onsemi
-
DTC043ZEBTL
Rohm Semiconductor
-
DTC114EKAT146
Rohm Semiconductor
-
DDTD113ZC-7-F
Diodes Incorporated
-
DRDNB16W-7
Diodes Incorporated
-
PDTC114ET,215
Nexperia USA Inc.
-
PDTC143ZT,215
Nexperia USA Inc.
-
PDTC143ET,215
Nexperia USA Inc.
-
PDTC143XT,215
Nexperia USA Inc.
-
MMUN2211LT1G
onsemi
-
PDTC144ET,215
Nexperia USA Inc.
-
PDTC124ET,215
Nexperia USA Inc.
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
