My Inquiry
My Account
Renesas RV1S9207ACCSP-10YC#KC0
- Part No.:
- RV1S9207ACCSP-10YC#KC0
- Manufacturer:
- Renesas
- Category:
- Isolators - Gate Drivers
- Package:
- 5-SMD, Gull Wing
- Datasheet:
-
RV1S9207ACCSP-10YC#KC0.pdf
- Description:
- OPTOISO 5KV 1CH GATE DVR 5LSSO
- Quantity:
- Payment:
- Shipping:
Inventory:6,880
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
RV1S9207ACCSP-10YC#KC0 from Renesas Electronics is a 5-pin SSOP (LSSO5) photovoltaic gate driver IC designed for isolated IGBT and power MOSFET control in high-noise industrial inverters and servo drives. It delivers 0.6 A peak output current, achieves 150 ns max propagation delay, and sustains 50 kV/µs common-mode transient immunity at 125 °C ambient operation.
For engineers reviewing the RV1S9207ACCSP-10YC#KC0 datasheet, RV1S9207ACCSP-10YC#KC0 pinout, RV1S9207ACCSP-10YC#KC0 application, or RV1S9207ACCSP-10YC#KC0 equivalent, this page provides verified technical context, validated pin functions, real-world application mappings, and confirmed alternative options for high-CMTI gate drive designs requiring reinforced insulation and UL/CSA/VDE compliance.
Technical Context
The RV1S9207ACCSP-10YC#KC0 integrates an AlGaAs LED input stage with a monolithic photo-diode, signal processing circuit, and dual power MOSFET output stage on a single chip. Its architecture enables unidirectional, non-inverting gate drive with UVLO protection and fast switching response.
It operates across 10–30 V supply range (VCC–VEE), supports 250 kHz maximum frequency, and features built-in under-voltage lockout with 8.6 V turn-on and 6.8 V turn-off thresholds. The device meets reinforced insulation requirements per UL1577, CSA C22.2 No.62368-1, and optional VDE DIN EN IEC 60747-5-5.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Current | 0.6 A peak (10 µs pulse, 0.5% duty) - sufficient to drive medium-power IGBTs without external buffers |
| Propagation Delay | 150 ns max (tPLH/tPHL) - enables precise timing control in 20+ kHz PWM inverters |
| CMTI | 50 kV/µs min - maintains signal integrity during fast dv/dt transients in motor drive half-bridges |
| Isolation Voltage | 5000 Vr.m.s. - certified for reinforced insulation in industrial safety-critical systems |
| Operating Temp | −40 °C to +125 °C - supports under-hood and enclosed inverter cabinet deployment |
| Package | LSSO5 (5-pin SSOP) with 8.2 mm creepage - enables compact PCB layout while meeting IEC 61800-5-1 spacing rules |
| UVLO Threshold | 8.6 V (rising), 6.8 V (falling) - prevents erratic gate switching during brown-out or startup |
Pinout & Package
RV1S9207ACCSP-10YC#KC0 uses a 5-pin LSSO5 (Small Outline SSOP) package with 0.65 mm pitch, 7.5 mm × 4.4 mm body, and 0.075 g typical weight. Creepage and air distance both exceed 8.2 mm for reinforced isolation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Anode) | LED Input Anode | Forward bias connection for internal AlGaAs LED; requires series resistor to limit IF to 8–12 mA |
| 2 (Cathode) | LED Input Cathode | Return path for input current; referenced to system ground of controller side |
| 3 (VEE) | Output Ground Reference | Low-side reference for output stage; must be tied to IGBT emitter or MOSFET source |
| 4 (VO) | Gate Drive Output | Push-pull output driving IGBT/MOSFET gate; swings between VEE and VCC |
| 5 (VCC) | Positive Supply Rail | Power input for output stage; 10–30 V range with internal UVLO monitoring |
Key Features
| Feature | Design Value |
|---|---|
| High CMTI | 50 kV/µs minimum ensures reliable operation in high-dv/dt motor drive environments |
| Fast Switching | 150 ns max propagation delay enables >200 kHz PWM control with low timing skew |
| Reinforced Insulation | UL1577 double protection + CSA C22.2 No.62368-1 certification simplifies safety compliance |
| Thermal Robustness | Rated for continuous operation up to +125 °C ambient - suitable for sealed inverter enclosures |
| Pb-Free & Halogen-Free | Ni/Pd/Au plating and RoHS-compliant construction meet global environmental regulations |
Applications
| Industrial Inverter | AC Servo Drive |
|---|---|
|
Use Scenario: Three-phase voltage-source inverter controlling induction motors in HVAC, pumps, and compressors. IC Role / Device Role / Timing Role: Isolated gate driver for upper- and lower-leg IGBTs in each phase leg, providing noise-immune level-shifting and fast turn-on/turn-off. Use Value: 50 kV/µs CMTI prevents false triggering during bus voltage transients; 0.6 A peak current enables direct drive of 300 A IGBT modules without external buffers. |
Use Scenario: High-bandwidth position-controlled servo amplifier for robotics and CNC motion systems. IC Role / Device Role / Timing Role: Gate driver for SiC MOSFETs in dual active bridge or three-phase inverter stages, delivering precise dead-time management. Use Value: 150 ns max propagation delay minimizes timing mismatch between complementary switches; 125 °C rating supports compact heatsink integration. |
| Solar PV Inverter | UPS Power Stage |
|
Use Scenario: DC–AC conversion stage in string or central solar inverters with transformerless topologies. IC Role / Device Role / Timing Role: Isolated gate driver for high-side and low-side IGBTs in H-bridge or NPC configurations, ensuring galvanic separation between PV array and grid. Use Value: 5000 Vr.m.s. isolation voltage satisfies IEC 62109 and UL 1741 requirements; 8.2 mm creepage meets IPC-2221B Class B spacing. |
Use Scenario: Online double-conversion UPS where rapid transfer and clean output waveform are critical. IC Role / Device Role / Timing Role: Gate driver for IGBTs in inverter and rectifier bridges, handling bidirectional power flow and battery charging cycles. Use Value: UVLO with 0.4 V hysteresis prevents partial turn-on during AC line sags; −40 °C to +125 °C range accommodates wide ambient variations in data center environments. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar IGBT gate driver applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Si8271BD-IS | Capacitive isolation; 4 A peak output; SOIC-8 package; no integrated UVLO | Higher drive strength but requires external UVLO circuit; larger footprint | Choose when >0.6 A gate current or higher-speed digital interface (e.g., PWM input) is required |
| HCPL-316J-000E | Optocoupler-based; 2.5 A peak output; DIP-8 package; 15 kV/µs CMTI | Lower CMTI limits use in high-dv/dt SiC systems; through-hole mounting increases board area | Choose for legacy designs needing drop-in replacement with higher peak current, accepting reduced noise immunity |
Compared with Si8271BD-IS and HCPL-316J-000E, RV1S9207ACCSP-10YC#KC0 offers optimal balance of high CMTI, compact LSSO5 footprint, and integrated UVLO-making it ideal for new-generation industrial inverters where space, noise immunity, and safety certification are prioritized over raw peak current.
Availability
RV1S9207ACCSP-10YC#KC0 is available at Aetrix Electronics and suitable for industrial inverters, AC servo drives, solar PV converters, and UPS systems requiring stable component supply, long-term lifecycle support, and certified reinforced insulation.
Supply support for RV1S9207ACCSP-10YC#KC0 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, power, and connectivity solutions for industrial, automotive, and infrastructure markets.
RV1S9207ACCSP-10YC#KC0 belongs to Renesas' high-CMTI photovoltaic gate driver family, engineered specifically for robust IGBT/MOSFET control in harsh electrical environments such as motor drives and renewable energy systems.
FAQ
What is the maximum recommended operating temperature for RV1S9207ACCSP-10YC#KC0?
The RV1S9207ACCSP-10YC#KC0 is rated for continuous operation from −40 °C to +125 °C ambient temperature. Derating applies above 85 °C for detector power dissipation (3.9 mW/°C) and above 110 °C for diode power dissipation (1.2 mW/°C). Thermal design must ensure junction temperature remains within absolute maximum limits per the datasheet.
Does RV1S9207ACCSP-10YC#KC0 support bidirectional signal transmission?
No, RV1S9207ACCSP-10YC#KC0 is a unidirectional, non-inverting gate driver IC. It accepts a logic-level input on pins 1 and 2 to drive the output stage on pins 3–5. There is no feedback or reverse-channel capability; communication flows only from controller side to power device side.
What safety certifications does RV1S9207ACCSP-10YC#KC0 hold?
RV1S9207ACCSP-10YC#KC0 is UL 1577 certified (double protection), CSA CAN/CSA-C22.2 No.62368-1 approved (reinforced insulation), and optionally VDE-certified per DIN EN IEC 60747-5-5. These approvals validate its suitability for safety-critical industrial equipment requiring reinforced isolation barriers.
Can RV1S9207ACCSP-10YC#KC0 directly drive SiC MOSFETs?
Yes, RV1S9207ACCSP-10YC#KC0 can directly drive most discrete SiC MOSFETs due to its 0.6 A peak output current, 150 ns max propagation delay, and 50 kV/µs CMTI - all critical for managing fast-switching SiC devices. Gate resistance selection must ensure dV/dt control and avoid oscillation per the target MOSFET's Qg and Miller charge specifications.
What is the minimum creepage distance for RV1S9207ACCSP-10YC#KC0?
The RV1S9207ACCSP-10YC#KC0 provides a minimum creepage distance of 8.2 mm in its LSSO5 package, satisfying reinforced insulation requirements per IEC 61800-5-1 and enabling compliance with IPC-2221B Class B spacing rules for industrial motor drives operating up to 1000 V DC bus voltages.
RV1S9207ACCSP-10YC#KC0 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Package/Case:
- 5-SMD, Gull Wing
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- Optical Coupling
- Number of Channels:
- 1
- Voltage - Isolation:
- 5000Vrms
- Common Mode Transient Immunity (Min):
- 50kV/µs
- Propagation Delay tpLH / tpHL (Max):
- 150ns, 150ns
- Pulse Width Distortion (Max):
- 50ns
- Rise / Fall Time (Typ):
- 6ns, 7ns
- Current - Output High, Low:
- 400mA, 400mA
- Current - Peak Output:
- 600mA
- Voltage - Forward (Vf) (Typ):
- 1.56V
- Current - DC Forward (If) (Max):
- 20 mA
- Voltage - Output Supply:
- 10V ~ 30V
- Grade:
- -
- Qualification:
- -
- Operating Temperature:
- -40°C ~ 125°C
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 5-LSSO
- Approval Agency:
- CSA, UL, VDE
RV1S9207ACCSP-10YC#KC0 FAQ
1.How can I place an order for RV1S9207ACCSP-10YC#KC0 through Aetrix?
Please submit a Request for Quotation (RFQ) for RV1S9207ACCSP-10YC#KC0 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for RV1S9207ACCSP-10YC#KC0 reliable?
The price and inventory of RV1S9207ACCSP-10YC#KC0 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for RV1S9207ACCSP-10YC#KC0 is usually 5 days.
3.What payment methods are accepted for RV1S9207ACCSP-10YC#KC0?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for RV1S9207ACCSP-10YC#KC0 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for RV1S9207ACCSP-10YC#KC0?
RV1S9207ACCSP-10YC#KC0 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your RV1S9207ACCSP-10YC#KC0 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for RV1S9207ACCSP-10YC#KC0?
For technical support, including RV1S9207ACCSP-10YC#KC0 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your RV1S9207ACCSP-10YC#KC0 requirements.
6.How does Aetrix verify that RV1S9207ACCSP-10YC#KC0 is sourced from the original manufacturer or authorized distributors?
All RV1S9207ACCSP-10YC#KC0 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that RV1S9207ACCSP-10YC#KC0 meets industry standards.
7.What is the process for return or replacement of RV1S9207ACCSP-10YC#KC0?
All RV1S9207ACCSP-10YC#KC0 units undergo pre-shipment inspection (PSI). If there is an issue with RV1S9207ACCSP-10YC#KC0, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The RV1S9207ACCSP-10YC#KC0 part is unused and in its original packaging.
Return procedure for RV1S9207ACCSP-10YC#KC0:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
RV1S9207ACCSP-10YC#KC0 Tags
.JPG)
-
TLP152(TPL,E
Toshiba Semiconductor and Storage
-
HT0740LG-G
Microchip Technology
-
FOD8314TR2
onsemi
-
1EDI60N12AFXUMA1
Infineon Technologies
-
1EDB7275FXUMA1
Infineon Technologies
-
UCC5350MCDR
Texas Instruments
-
2EDB7259KXUMA1
Infineon Technologies
-
UCC5304DWVR
Texas Instruments
-
SI8261BBC-C-ISR
Skyworks Solutions Inc.
-
HT0440LG-G
Microchip Technology
-
HCPL-0302-500E
Broadcom Limited
-
STGAP2HSCMTR
STMicroelectronics
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
