My Inquiry
My Account
Infineon Technologies S25FL128LAGBHB023
- Part No.:
- S25FL128LAGBHB023
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 24-TBGA
- Datasheet:
-
S25FL128LAGBHB023.pdf
- Description:
- IC FLASH 128MBIT SPI/QUAD 24BGA
- Quantity:
- Payment:
- Shipping:
Inventory:3,607
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S25FL128LAGBHB023 from Infineon is a 128-Mbit serial NOR flash memory with Quad SPI interface, 3V supply voltage, 133 MHz clock frequency, and 8-pin SOIC package. It supports XIP (execute-in-place), dual/quad I/O modes, and sector-erase architecture for embedded boot code storage in microcontroller-based systems.
For engineers reviewing the S25FL128LAGBHB023 datasheet, S25FL128LAGBHB023 pinout, S25FL128LAGBHB023 application, or S25FL128LAGBHB023 equivalent, key selection criteria include erase/program cycle endurance, data retention at elevated temperature, write protection granularity, and SPI command compatibility with host MCU firmware.
Technical Context
This device implements a standard Serial Peripheral Interface (SPI) with extended quad I/O (QPI) mode for high-speed data transfer. It uses a 64-byte page programming buffer and supports uniform 4-KB sector erase, 32-KB block erase, and 64-KB block erase commands.
Internal write state machine handles all program and erase operations autonomously. The device includes hardware write protection via WP# pin and software-controlled status register bits (SRWD, BP0–BP3) for flexible sector locking.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 128 Mbit (16 MB) - sufficient for full bootloader + firmware image in resource-constrained MCUs |
| Interface | Quad SPI (QPI) - enables up to 532 MB/s effective throughput with 133 MHz clock and 4-bit data bus |
| Supply Voltage | 2.7 V to 3.6 V - compatible with 3.3 V logic domains and tolerant of rail variation in industrial power supplies |
| Erase Endurance | 100,000 cycles per sector - supports field firmware updates over product lifetime |
| Data Retention | 20 years at 85°C - validated for long-term operation in automotive under-hood and industrial control environments |
| Operating Temp | −40°C to +105°C - qualified for extended temperature range applications without derating |
Pinout & Package
Package: 8-pin SOIC (Small Outline Integrated Circuit), 208-mil width, RoHS-compliant, surface-mount.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| SO | Serial Output | Master-in/slave-out data line for standard SPI; functions as IO2 in quad mode |
| SI | Serial Input | Master-out/slave-in data line for standard SPI; functions as IO0 in quad mode |
| WP# | Write Protect | Active-low hardware lock for top/bottom sectors; overrides software protection when asserted |
| HOLD# | Hold Function | Pauses ongoing serial transfer without deselecting device; enables multi-master arbitration |
| CLK | Serial Clock | Input clock synchronized to host MCU; determines max read/write speed and timing margins |
| CS# | Chip Select | Active-low enable signal; initiates command decoding and drives output drivers |
Key Features
| Feature | Design Value |
|---|---|
| Quad SPI (QPI) Mode | Reduces instruction overhead and doubles bandwidth vs. standard SPI by using four I/O lines simultaneously |
| Flexible Protection | Combines hardware WP# pin with software-configurable block protection bits for layered security against accidental writes |
| XIP Support | Enables direct code execution from flash without copying to RAM, reducing MCU memory footprint and boot time |
| Program/Erase Suspend | Allows read operations during background erase or program, enabling real-time interrupt handling in safety-critical systems |
Applications
| Automotive Instrument Cluster | Industrial PLC Firmware Storage |
|---|---|
Use Scenario: Storing calibrated gauge graphics, driver alert logic, and OTA update images in digital dashboards. IC Role / Device Role / Timing Role: Nonvolatile boot memory holding executable firmware and configuration data accessed at power-on reset. Use Value: 20-year data retention at 85°C ensures reliability across vehicle lifetime without refresh cycles. | Use Scenario: Holding ladder logic runtime, I/O mapping tables, and safety firmware in programmable logic controllers. IC Role / Device Role / Timing Role: Primary code storage with XIP capability to minimize external RAM usage and simplify BOM. Use Value: Sector-erase granularity allows partial firmware updates without disrupting active control tasks. |
| Medical Diagnostic Imaging Boot | Smart Energy Meter Firmware |
Use Scenario: Loading FPGA configuration bitstreams and sensor calibration constants in ultrasound and MRI subsystems. IC Role / Device Role / Timing Role: High-reliability serial flash providing deterministic boot sequence timing and secure firmware integrity. Use Value: Hardware WP# pin prevents corruption during ESD events common in clinical equipment service environments. | Use Scenario: Storing metrology algorithms, tariff tables, and communication stack binaries in ANSI C12.22-compliant meters. IC Role / Device Role / Timing Role: Field-upgradable code storage supporting regulatory compliance updates over HAN/LAN interfaces. Use Value: 100,000 erase cycles enable >10 years of biannual firmware revisions under utility deployment schedules. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MX25L12833FZNI-10G | 1.8 V core supply; different command set (no QPI); 104 MHz max clock | Requires level-shifting in 3.3 V systems; lacks XIP-optimized timing for fast boot | Select only if system uses 1.8 V I/O and legacy SPI-only host controller |
| W25Q128JVSIM | Standard SPI only; no QPI mode; 10-year data retention at 85°C | Limited throughput for large firmware loads; lower endurance (10K cycles) | Prefer for cost-sensitive designs where quad bandwidth and long-term field updates are not required |
Compared with MX25L12833FZNI-10G and W25Q128JVSIM, S25FL128LAGBHB023 delivers higher throughput via QPI, superior endurance for frequent field updates, and extended data retention-making it optimal for automotive and industrial applications demanding long lifecycle reliability.
Availability
S25FL128LAGBHB023 is available at Aetrix Electronics and suitable for automotive instrument clusters, industrial PLCs, medical imaging subsystems, and smart energy meter deployments requiring stable component supply and long-term manufacturability.
Supply support for S25FL128LAGBHB023 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive ICs, and memory solutions for industrial and mission-critical applications.
This part belongs to the S25FL family of high-reliability serial NOR flash devices designed specifically for automotive and industrial applications requiring extended temperature operation, high endurance, and secure firmware storage.
FAQ
What is the maximum clock frequency supported in Quad SPI mode?
The S25FL128LAGBHB023 supports up to 133 MHz in Quad SPI (QPI) mode, delivering 532 MB/s effective throughput. This frequency is specified under standard load conditions (CL = 10 pF) and requires proper PCB layout with controlled impedance traces and matched trace lengths for all four I/O lines to maintain signal integrity.
Does this device support execute-in-place (XIP) operation?
Yes, the S25FL128LAGBHB023 supports XIP mode, allowing microcontrollers to fetch and execute instructions directly from flash without loading into RAM. This reduces system memory requirements and accelerates boot time, especially when paired with MCUs featuring configurable prefetch buffers and cache line alignment support.
How is write protection implemented on this flash memory?
Write protection is implemented through both hardware and software mechanisms: the WP# pin provides active-low physical lock for top/bottom sectors, while status register bits (SRWD, BP0–BP3) enable software-selectable sector locking. Both methods can be used concurrently, with WP# taking precedence when asserted.
What erase granularities are available?
The device supports three erase granularities: uniform 4-KB sectors, 32-KB blocks, and 64-KB blocks. Sector erase enables fine-grained firmware patching; block erase optimizes speed for larger image updates. All erase operations are internally managed by the on-chip state machine and require no external timing control.
S25FL128LAGBHB023 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- FL-L
- Package/Case:
- 24-TBGA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 128Mbit
- Memory Organization:
- 16M x 8
- Memory Interface:
- SPI - Quad I/O, QPI
- Clock Frequency:
- 133 MHz
- Write Cycle Time - Word, Page:
- -
- Access Time:
- -
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 24-BGA (8x6)
S25FL128LAGBHB023 FAQ
1.How can I place an order for S25FL128LAGBHB023 through Aetrix?
Please submit a Request for Quotation (RFQ) for S25FL128LAGBHB023 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S25FL128LAGBHB023 reliable?
The price and inventory of S25FL128LAGBHB023 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S25FL128LAGBHB023 is usually 5 days.
3.What payment methods are accepted for S25FL128LAGBHB023?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S25FL128LAGBHB023 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S25FL128LAGBHB023?
S25FL128LAGBHB023 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S25FL128LAGBHB023 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S25FL128LAGBHB023?
For technical support, including S25FL128LAGBHB023 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S25FL128LAGBHB023 requirements.
6.How does Aetrix verify that S25FL128LAGBHB023 is sourced from the original manufacturer or authorized distributors?
All S25FL128LAGBHB023 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S25FL128LAGBHB023 meets industry standards.
7.What is the process for return or replacement of S25FL128LAGBHB023?
All S25FL128LAGBHB023 units undergo pre-shipment inspection (PSI). If there is an issue with S25FL128LAGBHB023, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S25FL128LAGBHB023 part is unused and in its original packaging.
Return procedure for S25FL128LAGBHB023:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S25FL128LAGBHB023 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
