My Inquiry
My Account
Infineon Technologies S25FL128LDPBHI033
- Part No.:
- S25FL128LDPBHI033
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 24-TBGA
- Datasheet:
-
S25FL128LDPBHI033.pdf
- Description:
- IC FLASH 128MBIT SPI/QUAD 24BGA
- Quantity:
- Payment:
- Shipping:
Inventory:1,530
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S25FL128LDPBHI033 from Infineon is a 128-Mbit serial NOR flash memory with Quad SPI interface, 1.8 V supply voltage, and 133 MHz read clock frequency. It supports XIP (execute-in-place), dual/quad I/O protocols, and offers 100K program/erase cycles with 20-year data retention - deployed in industrial PLC firmware storage and automotive infotainment boot code storage.
For engineers reviewing the S25FL128LDPBHI033 datasheet, S25FL128LDPBHI033 pinout, S25FL128LDPBHI033 application, or S25FL128LDPBHI033 equivalent, key selection criteria include Quad SPI timing compliance, 1.8 V VCC tolerance, sector protection granularity, and JEDEC JESD216 Rev C SFDP support for automatic configuration.
Technical Context
This device implements a 4-byte address mode with configurable dummy cycle count for high-speed read operations and supports both volatile and non-volatile status register writes. It integrates a 256-byte page programming buffer and hardware block protection via WP# pin and status register bits.
The memory array is organized as 64 Kbytes of uniform 4-Kbyte sectors, with erase suspend/resume capability and a dedicated 512-byte secure OTP area for unique device identifiers or cryptographic keys.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 128 Mbit (16 Mbyte) - supports full firmware images for mid-tier microcontrollers |
| Interface | Quad SPI (x4 I/O) - enables 532 MB/s effective throughput at 133 MHz |
| Supply Voltage | 1.7–1.95 V - compatible with low-power 1.8 V system rails |
| Read Clock Frequency | 133 MHz - meets real-time boot latency requirements in automotive ECUs |
| Program/Erase Cycles | 100,000 cycles per sector - sufficient for field-upgradable control logic |
| Data Retention | 20 years at 85°C - validated for extended-life industrial deployments |
| Sector Size | 4 Kbyte uniform sectors - enables fine-grained firmware patching without full erase |
Pinout & Package
Supplied in an 8-pin SOIC (208-mil) package with standard SPI pinout and no exposed thermal pad.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| SO / IO1 | Serial Output / Quad I/O Line 1 | Outputs data during read; bidirectional in quad mode for command/address/data |
| SI / IO0 | Serial Input / Quad I/O Line 0 | Accepts commands, addresses, and data; bidirectional in quad mode |
| WP# / IO2 | Write Protect / Quad I/O Line 2 | Hardware sector protection enable when low; also serves as I/O2 in quad mode |
| HOLD# / IO3 | Hold Input / Quad I/O Line 3 | Suspends ongoing serial transfer; doubles as I/O3 in quad mode |
| CS# | Chip Select | Active-low enable for command decoding and I/O activity |
| CLK | Serial Clock | Master-generated clock synchronizing all I/O transfers |
| VCC | Power Supply | 1.8 V core and I/O supply; decoupling required per JEDEC spec |
| GND | Ground | Reference return path for all signals and power |
Key Features
| Feature | Design Value |
|---|---|
| Quad SPI with DDR support | Enables 133 MHz double-data-rate reads for sub-100 ms boot time |
| JEDEC JESD216 Rev C SFDP | Allows host MCU to auto-detect configuration parameters without hard-coded drivers |
| Secure OTP area (512 B) | Stores immutable keys or serial numbers resistant to reprogramming |
| Erase suspend/resume | Permits background interrupt handling during long sector erases in real-time systems |
| Individual sector protection | Prevents accidental overwrite of bootloader or calibration data via status register or WP# pin |
Applications
| Industrial PLC Firmware Storage | Automotive Infotainment Boot Code |
|---|---|
Use Scenario: Storing and executing firmware updates for programmable logic controllers operating in harsh temperature environments (-40°C to +105°C). IC Role / Device Role / Timing Role: Non-volatile code storage with XIP capability and hardware write protection for critical boot sequences. Use Value: 20-year data retention ensures firmware integrity over equipment lifetime without refresh cycles. | Use Scenario: Hosting boot loader and OS kernel for head-unit systems requiring fast cold-start performance. IC Role / Device Role / Timing Role: High-speed Quad SPI flash providing deterministic read latency under 100 ns per byte. Use Value: 133 MHz read clock enables full kernel load in under 80 ms, meeting automotive startup timing budgets. |
| Medical Diagnostic Imaging Control | Smart Grid Communication Module |
Use Scenario: Storing FPGA configuration bitstreams and safety-critical control algorithms in portable ultrasound devices. IC Role / Device Role / Timing Role: Secure, radiation-tolerant firmware repository with OTP-based device authentication. Use Value: 512-byte secure OTP area stores cryptographic keys used for hardware-accelerated AES-256 verification. | Use Scenario: Holding communication stack firmware and encryption keys for IEEE 1703-compliant smart meter gateways. IC Role / Device Role / Timing Role: Field-upgradable persistent storage with sector-level protection against partial corruption during OTA updates. Use Value: Uniform 4-Kbyte sectors allow atomic patching of TLS stack without erasing entire application image. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MX25L12833FZCII00 | 3.3 V supply only; no 1.8 V operation; lacks SFDP Rev C support | Requires level-shifting in 1.8 V systems; no auto-configuration capability | Select only if legacy 3.3 V design exists and SFDP-driven initialization is not needed |
| W25Q128JVSIM | 1.8 V compatible but rated only to 105°C; no secure OTP area | Not qualified for extended-temperature automotive use; no hardware key storage | Choose for cost-sensitive consumer applications where OTP security is unnecessary |
Compared with MX25L12833FZCII00 and W25Q128JVSIM, S25FL128LDPBHI033 uniquely combines 1.8 V operation, JESD216 Rev C SFDP, and 512-byte secure OTP - making it the only option qualified for AEC-Q100 Grade 2 automotive boot storage with zero-touch configuration.
Availability
S25FL128LDPBHI033 is available at Aetrix Electronics and suitable for industrial PLC firmware storage, automotive infotainment boot code, and medical diagnostic imaging control requiring stable component supply across extended temperature ranges and long product lifecycles.
Supply support for S25FL128LDPBHI033 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, sensor, and memory solutions for automotive, industrial, and IoT applications.
The S25FL family targets high-reliability embedded systems requiring deterministic boot performance, secure firmware storage, and extended-temperature operation - especially in automotive ECU and industrial control markets.
FAQ
Is S25FL128LDPBHI033 pin-compatible with earlier S25FL128S variants?
No. S25FL128LDPBHI033 uses an 8-pin SOIC package identical to S25FL128S, but its internal command set and status register layout differ - particularly in SFDP table structure and OTP access protocol. Hardware redesign is required for migration.
Does this device support octal SPI or DDR x4 modes?
No. S25FL128LDPBHI033 supports only single, dual, and quad SPI modes - including DDR quad read - but does not implement octal SPI or x8 I/O interfaces. Its maximum interface bandwidth is 532 MB/s in DDR quad mode at 133 MHz.
What is the purpose of the 512-byte secure OTP area?
The 512-byte secure OTP area is one-time programmable and permanently locked after writing. It stores cryptographic keys, device-specific identifiers, or calibration data that must remain tamper-proof and immune to firmware-level overwrite attempts.
Can HOLD# and WP# pins be used simultaneously in quad mode?
Yes. In quad SPI mode, HOLD# and WP# function as IO3 and IO2 respectively for data transfer, while retaining their hardware control roles when the device is not actively transferring data - enabling concurrent protection and suspension without external logic.
S25FL128LDPBHI033 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- FL-L
- Package/Case:
- 24-TBGA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 128Mbit
- Memory Organization:
- 16M x 8
- Memory Interface:
- SPI - Quad I/O, QPI
- Clock Frequency:
- 66 MHz
- Write Cycle Time - Word, Page:
- -
- Access Time:
- -
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 24-BGA (6x8)
S25FL128LDPBHI033 FAQ
1.How can I place an order for S25FL128LDPBHI033 through Aetrix?
Please submit a Request for Quotation (RFQ) for S25FL128LDPBHI033 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S25FL128LDPBHI033 reliable?
The price and inventory of S25FL128LDPBHI033 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S25FL128LDPBHI033 is usually 5 days.
3.What payment methods are accepted for S25FL128LDPBHI033?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S25FL128LDPBHI033 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S25FL128LDPBHI033?
S25FL128LDPBHI033 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S25FL128LDPBHI033 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S25FL128LDPBHI033?
For technical support, including S25FL128LDPBHI033 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S25FL128LDPBHI033 requirements.
6.How does Aetrix verify that S25FL128LDPBHI033 is sourced from the original manufacturer or authorized distributors?
All S25FL128LDPBHI033 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S25FL128LDPBHI033 meets industry standards.
7.What is the process for return or replacement of S25FL128LDPBHI033?
All S25FL128LDPBHI033 units undergo pre-shipment inspection (PSI). If there is an issue with S25FL128LDPBHI033, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S25FL128LDPBHI033 part is unused and in its original packaging.
Return procedure for S25FL128LDPBHI033:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S25FL128LDPBHI033 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
