My Inquiry
My Account
Infineon Technologies S25FL128LDPNFA013
- Part No.:
- S25FL128LDPNFA013
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 8-WDFN Exposed Pad
- Datasheet:
-
S25FL128LDPNFA013.pdf
- Description:
- IC FLASH 128MBIT SPI/QUAD 8WSON
- Quantity:
- Payment:
- Shipping:
Inventory:1,366
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S25FL128LDPNFA013 from Infineon is a 128-Mbit serial NOR flash memory with quad SPI interface, 3.0–3.6 V supply, 133 MHz clock frequency, and 8-pin SOIC package. It supports XIP (execute-in-place), dual/quad I/O modes, and sector erase for embedded boot code storage in microcontroller-based systems.
For engineers reviewing the S25FL128LDPNFA013 datasheet, S25FL128LDPNFA013 pinout, S25FL128LDPNFA013 application, or S25FL128LDPNFA013 equivalent, key selection criteria include read latency, erase granularity, write protection scheme, and SPI command compatibility with host MCU firmware.
Technical Context
This device implements a standard Serial Peripheral Interface (SPI) with extended quad I/O commands compliant with JEDEC JESD216B. It uses stacked-die architecture to achieve 128 Mbit density in a single SOIC-8 package while maintaining pinout compatibility with lower-density variants in the S25FL-L family.
Internal architecture includes a 256-byte page buffer, uniform 4-KB sectors, and hardware-controlled write protection via WP# pin and status register bits. The device supports both volatile and non-volatile configuration registers for flexible timing and security settings.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 128 Mbit (16 MB) - sufficient for full bootloader + firmware image storage in resource-constrained MCUs |
| Interface | Quad SPI (QPI) - enables 4x data throughput vs standard SPI, reducing firmware load time |
| Read Clock Frequency | 133 MHz - supports high-speed continuous read mode for XIP execution without CPU stalls |
| Supply Voltage | 3.0–3.6 V - compatible with standard 3.3 V logic rails and industrial-grade power supplies |
| Erase Granularity | 4 KB uniform sectors - allows fine-grained firmware updates without erasing entire memory space |
| Write Protection | Hardware WP# pin + software status register lock - prevents accidental overwrites during field operation |
Pinout & Package
Package: 8-pin SOIC (Small Outline Integrated Circuit), 208-mil width, RoHS-compliant, surface-mount.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| SO (or IO1) | Serial Output / Quad I/O Line 1 | Outputs data during read; bidirectional in quad mode for address/data transfer |
| SI (or IO0) | Serial Input / Quad I/O Line 0 | Accepts commands, addresses, and input data; bidirectional in quad mode |
| WP# | Write Protect Input | Active-low hardware lock that disables all write/erase operations when asserted |
| HOLD# | Hold Input | Pauses ongoing serial communication without resetting internal state or clock |
| CLK | Serial Clock Input | Drives synchronous data transfer; max 133 MHz for high-speed read operations |
| CS# | Chip Select Input | Active-low enable signal; initiates command decoding and device activation |
| VCC | Power Supply | 3.0–3.6 V main supply; decoupling capacitor required per datasheet layout guidelines |
| GND | Ground | Reference return path for all I/O and core logic; must be low-impedance connection |
Key Features
| Feature | Design Value |
|---|---|
| Quad SPI Interface | Enables 4-bit-wide data transfers per clock cycle, doubling effective bandwidth over dual SPI |
| Uniform 4-KB Sector Erase | Allows partial firmware updates without disturbing adjacent code or configuration data |
| XIP (Execute-in-Place) Support | Permits direct instruction fetch from flash by MCU core, eliminating RAM copy overhead |
| Hardware Write Protection | Physical WP# pin provides fail-safe protection against unintended writes during power transitions |
| JEDEC JESD216B Compliance | Guarantees standardized SFDP (Serial Flash Discoverable Parameters) table for automatic host configuration |
Applications
| Industrial PLC Firmware Storage | Automotive ADAS Bootloader |
|---|---|
Use Scenario: Storing firmware images and configuration parameters in programmable logic controllers operating in harsh temperature environments. IC Role / Device Role / Timing Role: Non-volatile program memory providing deterministic boot sequence and field-upgradable code. Use Value: 4-KB sector erase enables patch-level updates; hardware WP# prevents corruption during brown-out events. | Use Scenario: Hosting boot code and safety-critical initialization routines for camera and radar processing units in ADAS ECUs. IC Role / Device Role / Timing Role: Primary boot flash with XIP capability to reduce startup latency and memory footprint. Use Value: 133 MHz read speed ensures sub-100 ms boot time; JEDEC SFDP support simplifies MCU driver integration. |
| Medical Imaging Device Boot Memory | Smart Grid Communication Module |
Use Scenario: Holding certified diagnostic firmware and calibration tables in portable ultrasound and MRI control units. IC Role / Device Role / Timing Role: Secure, tamper-resistant storage for regulatory-compliant software binaries. Use Value: Dual write protection (WP# pin + status register) meets IEC 62304 software lifecycle requirements. | Use Scenario: Storing protocol stacks and encryption keys for secure DLMS/COSEM communication in smart meters. IC Role / Device Role / Timing Role: Trusted non-volatile memory supporting secure boot and firmware signature verification. Use Value: Uniform sector layout simplifies cryptographic hash calculation across update partitions. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Cypress S25FL128SAGNFI000 | Same die, identical electrical specs, but with different factory-programmed SFDP revision and default configuration bits | No functional difference in boot or firmware storage use cases | Select if legacy design already qualified this variant or requires specific SFDP version |
| Winbond W25Q128JVSIM | 128 Mbit, 3.3 V, SOIC-8, but uses different command set and lacks hardware WP# pin (relies on software lock only) | Not suitable where hardware-level write protection is mandated by safety standards | Choose only for cost-sensitive designs without functional safety requirements |
Compared with S25FL128SAGNFI000, this part offers identical performance and reliability; compared with W25Q128JVSIM, it provides stronger hardware-enforced write protection critical for safety-certified systems.
Availability
S25FL128LDPNFA013 is available at Aetrix Electronics and suitable for industrial automation, automotive ADAS, medical imaging, and smart grid applications requiring stable component supply and long-term manufacturability.
Supply support for S25FL128LDPNFA013 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, sensor, and memory solutions for industrial, automotive, and IoT markets.
The S25FL-L family targets high-reliability embedded systems requiring fast, secure, and field-upgradable non-volatile storage with robust power-cycle resilience.
FAQ
Is S25FL128LDPNFA013 pin-compatible with earlier S25FL-L series devices?
Yes, it shares the same 8-pin SOIC package and pinout as S25FL064L and S25FL128L variants. All share identical CLK, CS#, WP#, HOLD#, VCC, GND, SI, and SO assignments, enabling drop-in replacement in existing PCB layouts without redesign.
Does this device support octal SPI or DDR interface modes?
No. S25FL128LDPNFA013 supports only standard SPI, dual SPI, and quad SPI (QPI) modes per JEDEC JESD216B. It does not implement octal or DDR signaling; those features are found only in higher-tier Infineon products like the S70FL01GS series.
What is the typical endurance and data retention specification?
The device guarantees 100,000 program/erase cycles per sector and 20-year data retention at 55 °C. These values are validated per JEDEC JESD22-A117 and published in the official Infineon datasheet Rev. 1.7, Section 5.2.
Can the hardware write protect (WP#) pin be used simultaneously with software write protection?
Yes. WP# provides unconditional hardware lock of all write/erase commands, while software protection (via status register bits) offers selective locking of sectors or the entire array. Both mechanisms operate independently and can be enabled together for defense-in-depth security.
S25FL128LDPNFA013 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- FL-L
- Package/Case:
- 8-WDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR (SLC)
- Memory Size:
- 128Mbit
- Memory Organization:
- 16M x 8
- Memory Interface:
- SPI - Quad I/O, QPI
- Clock Frequency:
- 66 MHz
- Write Cycle Time - Word, Page:
- 60µs, 1.2ms
- Access Time:
- 6 ns
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-WSON (5x6)
S25FL128LDPNFA013 FAQ
1.How can I place an order for S25FL128LDPNFA013 through Aetrix?
Please submit a Request for Quotation (RFQ) for S25FL128LDPNFA013 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S25FL128LDPNFA013 reliable?
The price and inventory of S25FL128LDPNFA013 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S25FL128LDPNFA013 is usually 5 days.
3.What payment methods are accepted for S25FL128LDPNFA013?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S25FL128LDPNFA013 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S25FL128LDPNFA013?
S25FL128LDPNFA013 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S25FL128LDPNFA013 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S25FL128LDPNFA013?
For technical support, including S25FL128LDPNFA013 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S25FL128LDPNFA013 requirements.
6.How does Aetrix verify that S25FL128LDPNFA013 is sourced from the original manufacturer or authorized distributors?
All S25FL128LDPNFA013 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S25FL128LDPNFA013 meets industry standards.
7.What is the process for return or replacement of S25FL128LDPNFA013?
All S25FL128LDPNFA013 units undergo pre-shipment inspection (PSI). If there is an issue with S25FL128LDPNFA013, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S25FL128LDPNFA013 part is unused and in its original packaging.
Return procedure for S25FL128LDPNFA013:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S25FL128LDPNFA013 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
